Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.40
The WAGO 769-106/021-000/034-000/050-000 is a specialised 6-pole female plug-in terminal block connector from the established WAGO X-COM® 769 series. Designed for modular industrial electrical connections, this connector belongs to the 769-106/021 platform, which combines proven CAGE CLAMP® spring pressure connection technology with a mechanically secured plug-in interface for industrial control panels, automation systems and electrical machinery.
The corresponding WAGO 769-106/021 connector platform features lateral locking levers, an integrated coding finger, six independent conductor connection points and a compact 5 mm pole spacing. This arrangement supports secure electrical connections, organised wiring and straightforward equipment maintenance. The lateral locking mechanism provides additional mechanical retention when the female connector is engaged with an appropriately configured male mating component.
The X-COM® 769 connection platform offers a nominal conductor cross-section of 4 mm², with standard IEC electrical ratings of 500 V and 32 A under specified operating conditions. The complete 769-106/021-000/034-000/050-000 manufacturer part number identifies a particular ordering configuration, making accurate part-number matching important when specifying replacement connectors or assembling compatible modular electrical systems.
The WAGO 769-106/021-000/034-000/050-000 belongs to the established X-COM® 769 connector system, which uses CAGE CLAMP® spring pressure technology for reliable conductor termination. The spring mechanism maintains electrical contact pressure without relying on conventional terminal screws, helping provide dependable electrical connections in industrial control systems and machinery.
The corresponding connector platform supports solid and fine-stranded copper conductors from 0.08–4 mm², with a nominal conductor cross-section of 4 mm². A suitable operating tool opens the spring clamp during conductor insertion or removal. The standard platform specifies a conductor stripping length of 8–9 mm, supporting correct wire preparation and secure termination.
The six-pole configuration provides six separate electrical connection points within a modular assembly. Its 5 mm pole spacing supports organised wiring and efficient use of installation space in electrical control cabinets, machinery and industrial automation equipment.
The corresponding 769-106/021-000 base connector incorporates lateral locking levers. These levers provide additional mechanical retention when the female plug is connected to a compatible male connector, helping reduce the likelihood of unintended separation during normal equipment operation, vibration or maintenance handling.
The locking-lever platform also incorporates an integrated coding finger and supports variable mechanical coding. Correctly configured coding helps distinguish designated connector positions within complex electrical assemblies. For applications containing multiple similar connectors, coding can assist with installation accuracy and simplify ongoing equipment servicing.
Another important feature of the X-COM® system is its modular plug-in construction. Conductors can be terminated during equipment manufacture, allowing completed wiring assemblies to be installed using compatible plug-in interfaces. During servicing, the plug-in connection can be released after electrical isolation without repeatedly removing individual conductors from their spring clamps.
The standard 769-106/021 connector platform uses a polyamide 66 insulating housing with an UL94 V-0 flammability classification. These material characteristics support the mechanical and electrical requirements of industrial connector applications, including control panels, modular equipment and machine wiring.
The additional /034-000 and /050-000 suffixes identify a specific manufacturer ordering configuration beyond the standard 769-106/021-000 base connector. Although the underlying six-pole connection platform establishes the general electrical and mechanical characteristics, suffix-specific features should not be assumed to match the standard version in every respect.
When selecting the 769-106/021-000/034-000/050-000 for replacement or new equipment, the complete part number should be used to identify the required connector configuration. Particular attention should be paid to mating compatibility, coding arrangements, connector identification and any application-specific mechanical requirements.
Important installation information: Under IEC/EN 61984, plug-in connectors without current-interrupting capability must not be connected or disconnected while energised or under load. The permissible electrical rating of a completed connection depends on the exact connector configuration, mating component, conductor selection and installation conditions.
| Manufacturer | WAGO |
|---|---|
| Product series | X-COM® 769 |
| Manufacturer part number | 769-106/021-000/034-000/050-000 |
| Base connector platform | 769-106/021-000 |
| Product type | Female plug-in terminal block connector |
| Connector configuration | 1-conductor female connector, 6-pole |
| Number of poles | 6 |
| Number of connection points | 6 |
| Number of potentials | 6 |
| Contact type | Female connector / socket |
| Connection technology | CAGE CLAMP® |
| Termination method | Screwless spring pressure connection |
| Actuation method | Operating tool |
| Nominal conductor cross-section | 4 mm² |
| Solid conductor range (base platform) | 0.08–4 mm² |
| Fine-stranded conductor range (base platform) | 0.08–4 mm² |
| Conductor size (base platform) | 28–12 AWG |
| Connectable conductor material | Copper |
| Conductor stripping length (base platform) | 8–9 mm |
| Pole spacing | 5 mm |
| Nominal module width | 5 mm |
| Rated voltage (IEC base-platform specification) | 500 V |
| Rated current (IEC base-platform specification) | 32 A |
| Rated impulse voltage (IEC base-platform specification) | 6 kV |
| Overvoltage category (base platform) | III |
| Pollution degree (base platform) | 3 |
| Locking mechanism (base platform) | Lateral locking levers |
| Connector orientation (base platform) | Straight / in-line |
| Wiring direction (base platform) | Front-entry wiring |
| Plug wire entry (base platform) | 180° |
| Reference base-platform width | 45 mm |
| Reference base-platform height | 45.2 mm |
| Reference base-platform depth | 18.3 mm |
| Reference dimensions (W × H × D) | 45 × 45.2 × 18.3 mm |
| Insulating material (base platform) | Polyamide 66 (PA66) |
| Flammability classification (base platform) | UL94 V-0 |
| Integrated coding finger (base platform) | Yes |
| Variable coding (base platform) | Yes |
| Anti-rotation protection (base platform) | Yes |
| Marking position (base platform) | Side marking |
| Direct ground contact to DIN rail or housing (base platform) | No |
| Connector system | WAGO X-COM® modular plug-in connection |
| Installation arrangement | Plug-in connection with compatible mating components |
| Mating compatibility | Appropriately configured WAGO X-COM® male connectors |
| Applicable connector standard (base platform) | IEC/EN 61984 |
| Variant identification | Manufacturer suffixes /034-000 and /050-000 |
| Primary application | Industrial electrical control and automation systems |
The WAGO 769-106/021-000/034-000/050-000 is a specialised 6-pole female plug-in terminal block connector from the WAGO X-COM® 769 series. It is intended for detachable electrical connections in industrial control panels, automation systems and machinery, using the established CAGE CLAMP® spring pressure connection platform.
Both designations share the WAGO X-COM® 769 six-pole female connector platform, associated with 5 mm pole spacing, 4 mm² nominal conductor capacity and lateral locking levers. The additional /034-000 and /050-000 suffixes identify a particular manufacturer ordering configuration. The complete part numbers should not automatically be treated as interchangeable.
The corresponding WAGO 769-106/021-000 base platform has an IEC rated voltage of 500 V, a rated current of 32 A and a rated impulse voltage of 6 kV under overvoltage category III and pollution degree 3. The applicable rating of the complete connection depends on the exact variant, mating connector and installation conditions.
The standard six-pole locking-lever connector platform accepts solid and fine-stranded copper conductors from 0.08–4 mm², corresponding to 28–12 AWG. Its nominal conductor cross-section is 4 mm², and the standard conductor stripping length is 8–9 mm. Conductors are terminated using the CAGE CLAMP® spring pressure system.
Lateral locking levers provide additional mechanical retention between the female connector and a compatible male mating component, helping reduce unintended separation. Mechanical coding helps distinguish designated connector positions in industrial equipment containing multiple similar plug-in connections. Correct mating components and coding arrangements must be selected for the complete connector configuration.
WAGO X-COM® 769 series connectors are established solutions for modular electrical connections in industrial control panels, machinery and automation equipment. The WAGO 769-106/021-000/034-000/050-000 belongs to the six-pole female connector family, combining the proven CAGE CLAMP® spring pressure connection platform with the mechanical retention and coding capabilities associated with the 769-106/021 design to support secure electrical assembly and convenient equipment maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.