Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.39
The WAGO 769-103 is a reliable 3-pole pluggable female connector designed for secure, removable electrical connections in industrial automation, control panels and modular electrical distribution systems. Part of the established WAGO X-COM® 769 Series, it features proven CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw-clamping connections.
Designed for use with compatible WAGO X-COM® carrier terminal blocks and mating components, the WAGO 769-103 provides a removable electrical interface that simplifies installation, equipment servicing and modular system assembly. Its straight, front-entry conductor connection enables convenient wiring, while the integrated coding finger supports configurable connector identification. The three-pole arrangement provides three separate electrical potentials within one compact connector.
With a 32 A IEC rated current, 500 V IEC rated voltage and 5 mm connection pitch, the WAGO 769-103 is suitable for industrial electrical installations requiring dependable pluggable connections. Its 4 mm² nominal conductor capacity, 15 mm overall width and durable grey polyamide housing make it a practical solution for machinery interfaces, electrical control systems and modular industrial equipment.
The WAGO 769-103 forms part of the WAGO X-COM® modular pluggable terminal block system, developed to simplify electrical connections between field wiring and industrial control equipment. Unlike permanently fixed terminal connections, the X-COM® system enables compatible female connectors to be disconnected from their mating carrier terminals, supporting equipment servicing, modular assembly and component replacement.
The connector incorporates proven CAGE CLAMP® spring pressure connection technology, which maintains consistent electrical contact pressure on connected copper conductors without conventional clamping screws. This supports dependable electrical connections in industrial environments subject to vibration and temperature variations. Conductors are installed using an appropriate operating tool, with an 8–9 mm stripping length for correct conductor preparation.
Its three-pole configuration provides three separate electrical potentials within one connector, allowing independent conductors to be terminated through a single removable interface. The 5 mm contact pitch and 15 mm overall width enable compact electrical assemblies where efficient use of panel space is important.
The integrated coding finger supports variable coding with appropriately configured mating components. This helps reduce the risk of incorrect connector placement in equipment containing multiple pluggable terminal assemblies. Anti-rotation protection supports correct positioning, while the side marking facility enables clear circuit identification during installation, commissioning and maintenance.
The standard WAGO 769-103 is a straight-entry connector. For installations requiring alternative cable routing, the X-COM® 769 Series also includes angled connector variants such as the WAGO 769-103/022-000. The straight-entry arrangement is particularly useful where conductors can approach the connector directly from the front and sufficient wiring clearance is available.
The WAGO 769-103 is a pluggable female connector rather than a permanently soldered PCB terminal block. It is intended to mate with compatible WAGO X-COM® carrier terminal blocks or other designated mating components, allowing conductors to remain terminated within the female connector when the pluggable interface is disconnected.
Important installation information: In accordance with IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be connected or disconnected while live or under load. The electrical supply must be safely isolated before mating or unmating the connector.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 18.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 3 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 15 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 45.2 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-103 | |
| Product type | Pluggable female terminal connector | |
| Connector design | Straight, 1-conductor-per-pole female connector | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 3 | |
| Total electrical potentials | 3 | |
| Conductors per pole | 1 | |
| Rated current (IEC) | 32 A | |
| Rated voltage (IEC, III / 3) | 500 V | |
| Rated impulse voltage (IEC, III / 3) | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 300 V | |
| Rated current (UL) | 20 A | |
| Rated voltage (CSA) | 300 V | |
| Rated current (CSA) | 20 A | |
| Connection pitch | 5 mm | |
| Module width | 5 mm per pole | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Connectable conductor material | Copper | |
| Conductor stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Wiring type | Front-entry wiring | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Straight | |
| Mounting / connection type | Pluggable connection to compatible X-COM® mating components | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Plugging without loss of pin spacing | Yes | |
| Integral mismating protection | No | |
| Direct earth contact to DIN rail / housing | No | |
| Marking position | Side marking | |
| Weight | 9.4 g | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colour | Grey | |
| Material group | I | |
| Insulation flammability classification | UL 94 V-0 | |
| Halogen-free | Yes | |
| Fire load | 0.155 MJ | |
| Processing temperature range | −35 to +85 °C | |
| Continuous operating temperature range | −60 to +105 °C | |
| Connection standard | IEC/EN 61984 | |
| Insulation coordination standard | IEC/EN 60664-1 | |
| Product group | X-COM® System | |
| Packaging unit | 50 pieces | |
| Packaging type | Box | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918471343 |
The WAGO 769-103 is a 3-pole X-COM® pluggable female connector designed for secure, removable electrical connections in industrial automation, control panels and modular electrical equipment. It uses CAGE CLAMP® spring pressure connection technology and mates with compatible WAGO X-COM® components.
The WAGO 769-103 provides 3 poles, 3 conductor connection points and 3 separate electrical potentials. Each pole accepts one conductor through a CAGE CLAMP® spring pressure connection.
The WAGO 769-103 has a 32 A IEC rated current and a 500 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions. It also features a 6 kV rated impulse withstand voltage. The published UL and CSA ratings are 300 V and 20 A. The applicable rating of the complete connection must account for the mating component and installation conditions.
The connector accepts solid and fine-stranded copper conductors from 0.08–4 mm², equivalent to 28–12 AWG. Its nominal conductor cross-section is 4 mm², and the specified conductor stripping length is 8–9 mm.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent electrical contact pressure without conventional clamping screws. On the WAGO 769-103, an appropriate operating tool opens the spring clamp for conductor insertion and removal.
The WAGO 769-102 is a 2-pole connector measuring 10 mm wide, while the WAGO 769-103 is a 3-pole connector measuring 15 mm wide. Both belong to the X-COM® 769 Series and use CAGE CLAMP® technology with a 5 mm connection pitch and 4 mm² nominal conductor capacity.
The standard WAGO 769-103 features a straight, front-entry conductor connection, while the 769-103/022-000 is an angled variant designed to provide an alternative conductor routing arrangement. Both are three-pole X-COM® female connectors, but their physical layouts and wiring entry arrangements differ.
No. The WAGO 769-103 is a pluggable female connector rather than a permanently soldered PCB terminal block. It connects to compatible WAGO X-COM® mating components to provide a removable electrical interface between terminated conductors and the electrical equipment.
Yes. The WAGO 769-103 features an integrated coding finger and supports variable coding when used with appropriately configured mating components. This helps identify connector positions and reduce the likelihood of incorrect mating in modular electrical installations.
No. The WAGO 769-103 is a pluggable connector without current-interrupting capability. In accordance with IEC/EN 61984, this type of connector must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connecting or disconnecting the connector.
The WAGO 769-103 measures 15 mm wide, 45.2 mm high and 18.3 mm deep, with a weight of approximately 9.4 g. Its compact 5 mm module width per pole supports space-efficient installation in compatible X-COM® terminal assemblies.
Yes. The WAGO 769-103 features a durable polyamide 66 insulating housing, a UL 94 V-0 flammability classification and a continuous operating temperature range of −60 to +105 °C. Its CAGE CLAMP® spring pressure connection technology supports dependable conductor termination when used with compatible mating components and within the specified operating conditions.
WAGO X-COM® 769 Series female connectors provide dependable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® spring pressure connection technology, compact three-pole construction and a reliable pluggable interface, the WAGO 769-103 offers a practical solution for secure, accessible and service-friendly electrical connections in modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.