Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.36
The WAGO 769-103/021-000/032-000/050-000 is a specialised 3-pole pluggable female connector from the established WAGO X-COM® 769 Series, designed for secure and removable electrical connections in industrial automation, control panels and modular electrical equipment. Featuring proven CAGE CLAMP® spring pressure connection technology, the connector provides dependable conductor termination without conventional screw-clamping connections.
Based on the WAGO 769-103/021-000 connector platform, this configuration incorporates lateral locking levers for mechanical retention and an assembled strain relief plate for improved cable support. Together, these features help manage the mechanical demands of industrial installations, particularly where connected wiring may be exposed to movement, vibration or handling during maintenance.
The connector features a 5 mm connection pitch, 4 mm² nominal conductor capacity and three independent electrical potentials. The underlying X-COM® connector platform supports 32 A IEC rated current and 500 V IEC rated voltage under specified conditions. The complete /021-000/032-000/050-000 designation identifies a specific manufacturer configuration and should be retained when selecting an exact replacement.
The WAGO 769-103/021-000/032-000/050-000 belongs to the WAGO X-COM® modular pluggable terminal block system, developed to provide secure, removable connections between field wiring and industrial equipment. Pluggable electrical interfaces simplify the maintenance and replacement of compatible equipment modules because conductors can remain terminated within the female connector when the mating interface is disconnected.
The connector uses CAGE CLAMP® spring pressure connection technology, which applies consistent clamping force to connected conductors without conventional terminal screws. This supports dependable conductor termination in industrial environments where vibration, installation consistency and long-term connection performance are important.
The lateral locking levers provide additional mechanical retention between the female connector and an appropriately selected mating component. They help reduce the possibility of unintended separation resulting from machinery movement, vibration or cable handling. The locking mechanism also supports controlled connector release during planned maintenance.
The assembled strain relief plate provides a means of supporting connected wiring and managing mechanical forces that might otherwise be transmitted directly to the conductor terminations. When used with suitable cable fastening and routing practices, this arrangement can reduce stress on the spring-clamp connections and improve cable organisation inside an electrical enclosure.
The combination of locking levers and strain relief addresses two separate mechanical requirements. The locking levers secure the connector to its mating component, while the strain relief plate supports the wiring approaching the connector. This makes the assembly particularly useful for machinery interfaces and modular electrical equipment that may be subject to cable movement or repeated servicing.
The three-pole configuration provides three independent electrical potentials within a single removable connector. Its 5 mm contact pitch supports compact modular connection arrangements, while the standard connector platform's coding feature helps identify intended mating positions in installations containing multiple connectors.
The additional /050-000 suffix identifies a further manufacturer-specific configuration of the locking and strain relief connector assembly. Although the base connection technology and connector family can be identified, the exact additional characteristic introduced by this suffix should not be assumed to be identical to another variant. For replacement purposes, the entire part number should be matched.
When designing an enclosure, sufficient clearance must be allowed for the connector body, locking levers, assembled strain relief plate and incoming conductor bend radius. The complete manufacturer's mechanical drawing should be used to establish the required installation envelope rather than relying solely on the dimensions of the base 769-103 connector.
The WAGO 769-103/021-000/032-000/050-000 is a pluggable female connector rather than a permanently soldered PCB terminal block. It is intended to mate with compatible WAGO X-COM® components to provide a detachable interface between terminated wiring and the electrical equipment.
Important installation information: In accordance with IEC/EN 61984, pluggable connectors without current-interrupting capability must not be connected or disconnected while live or under load. The electrical supply must be safely isolated before mating or unmating the connector, even where locking levers and strain relief components are fitted.
| Manufacturer | WAGO |
|---|---|
| Series | X-COM® 769 Series |
| Model | 769-103/021-000/032-000/050-000 |
| Base model | 769-103 |
| Base locking connector | 769-103/021-000 |
| Product family | X-COM® modular pluggable terminal system |
| Product type | Pluggable female terminal connector |
| Connector configuration | Three-pole connector with lateral locking and strain relief arrangement |
| Connection technology | CAGE CLAMP® spring pressure connection |
| Number of poles | 3 |
| Total conductor connection points | 3 |
| Total electrical potentials | 3 |
| Conductors per pole | 1 |
| Rated current (base connector, IEC) | 32 A |
| Rated voltage (base connector, IEC III / 3) | 500 V |
| Rated impulse voltage (base connector, IEC III / 3) | 6 kV |
| Overvoltage category for base IEC rating | III |
| Pollution degree for base IEC rating | 3 |
| Connection pitch | 5 mm |
| Nominal conductor cross-section | 4 mm² |
| Solid conductor cross-section (base connector) | 0.08–4 mm² |
| Fine-stranded conductor cross-section (base connector) | 0.08–4 mm² |
| Conductor size (base connector) | 28–12 AWG |
| Conductor stripping length (base connector) | 8–9 mm |
| Conductor material | Copper, subject to manufacturer installation requirements |
| Actuation type | Operating tool |
| Wiring arrangement | Front-entry wiring |
| Plug-in contact type | Female connector / socket |
| Connector orientation | Straight |
| Locking arrangement | Lateral locking levers |
| Locking variant designation | /021-000 |
| Strain relief configuration | Assembled strain relief plate |
| Strain relief variant designation | /032-000 |
| Additional manufacturer variant code | /050-000 |
| Coding system (base design) | Integrated coding finger |
| Marking provision | Side marking |
| Mounting / connection type | Pluggable connection to compatible X-COM® mating components |
| Housing colour | Grey |
| Housing material (standard platform) | Polyamide 66 (PA66) |
| Flammability classification (standard platform) | UL 94 V-0 |
| Continuous operating temperature (standard platform) | −60 to +105 °C |
| Connector safety standard | IEC/EN 61984 |
| Insulation coordination standard | IEC/EN 60664-1 |
| Product group | X-COM® System |
| Exact overall assembly dimensions | Refer to the manufacturer drawing for this complete variant |
| Exact GTIN / EAN | Not independently confirmed for this variant |
The WAGO 769-103/021-000/032-000/050-000 is a three-pole X-COM® pluggable female connector designed for secure, removable electrical connections in industrial automation, machinery and control panels. It belongs to the connector family featuring lateral locking levers and an assembled strain relief plate.
The connector has 3 poles, providing three conductor connection points and three independent electrical potentials. Each pole is designed for one conductor connection using CAGE CLAMP® spring pressure technology.
Both part numbers belong to the same three-pole X-COM® connector family with lateral locking levers and a strain relief plate configuration. The 769-103/021-000/032-000/050-000 includes the additional /050-000 manufacturer suffix. Its exact variant-specific function has not been independently confirmed, so the full part number should be used when selecting an identical replacement.
The lateral locking levers help retain the female connector securely when connected to a compatible mating component. They reduce the risk of unintended separation caused by vibration, movement or cable handling and provide a controlled method of connector release during servicing.
The strain relief plate provides additional mechanical support for connected wiring. When installed with suitable cable fastening, it helps manage pulling and movement forces that might otherwise act directly on the conductor terminations.
The underlying WAGO 769-103/021-000 connector platform supports 32 A and 500 V IEC under overvoltage category III, pollution degree 3 conditions, with a 6 kV rated impulse voltage. The applicable ratings of the complete special-variant connection must account for the exact configuration, mating component and installation conditions.
The standard X-COM® 769-103 connection platform accepts solid and fine-stranded conductors from 0.08–4 mm², equivalent to 28–12 AWG. Its nominal conductor capacity is 4 mm², and the standard stripping length is 8–9 mm.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent electrical contact pressure without conventional conductor clamping screws. A suitable operating tool opens the spring clamp for conductor insertion and removal.
No. The features serve different purposes. The lateral locking levers provide mechanical retention of the mating connector, while the strain relief plate supports the connected wiring. Both contribute to a mechanically secure electrical assembly.
The /050-000 suffix is an additional WAGO manufacturer configuration code. Its precise function for this complete part number has not been independently established, so it should not be treated as interchangeable with another version without checking the manufacturer's documentation.
No. It is a pluggable female connector designed to mate with compatible WAGO X-COM® male components. It is not itself a permanently soldered PCB terminal block, although suitable mating components may include PCB-mounted headers.
No. Under IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be mated or unmated while live or under load. Always safely isolate the electrical supply before connecting or disconnecting the connector, regardless of its locking or strain relief features.
WAGO X-COM® 769 Series connectors provide dependable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® spring pressure connection technology with lateral locking levers and an assembled strain relief plate, the WAGO 769-103/021-000/032-000/050-000 offers a practical solution for secure, mechanically supported and service-friendly electrical connections in industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.