Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.50
The WAGO 769-103/000-039 is a 3-pole pluggable female connector featuring a distinctive green/yellow, blue and grey housing configuration for clearly identifiable electrical connections in industrial automation, control panels and modular electrical equipment. Part of the established WAGO X-COM® 769 Series, it incorporates proven CAGE CLAMP® spring pressure connection technology to provide secure conductor termination without conventional clamping screws.
The WAGO 769-103/000-039 provides three separate conductor connections within a compact pluggable assembly. Its colour arrangement is particularly useful where electrical installations require visual identification of protective earth, neutral and other circuit conductors. The green/yellow section is positioned at one end of the connector, followed by blue and grey sections, distinguishing this variant from the WAGO 769-103/000-038, which uses the reverse colour sequence.
Featuring a 5 mm connection pitch, 4 mm² nominal conductor capacity and compact 15 mm overall width, the WAGO 769-103/000-039 offers a practical solution for modular electrical installations. Its removable connection interface, integrated coding finger and durable polyamide housing make it suitable for industrial control equipment, machinery interfaces and electrical assemblies requiring dependable, clearly identifiable connections.
The WAGO 769-103/000-039 is part of the WAGO X-COM® modular pluggable terminal block system, developed to provide secure, removable electrical connections between field wiring and industrial equipment. The female connector can be separated from compatible mating components during equipment servicing or replacement, allowing conductors to remain terminated within the connector.
Its CAGE CLAMP® spring pressure connection technology maintains consistent conductor contact pressure without conventional screw terminals. This supports dependable electrical connections in environments where vibration, conductor retention and maintenance accessibility are important. Conductors are installed using an appropriate operating tool and a specified 8–9 mm stripping length.
A key characteristic of the WAGO 769-103/000-039 is its distinctive green/yellow, blue and grey colour sequence. In conventional electrical installations, green/yellow identifies protective earth conductors and blue commonly identifies neutral conductors. The grey section allows a further circuit connection to be distinguished within the same compact assembly.
The 769-103/000-039 differs from the 769-103/000-038 in the order of the coloured housing sections. The /000-039 version uses green/yellow, blue and grey, while the /000-038 version uses grey, blue and green/yellow. This distinction is important when selecting connectors for an established wiring layout or ordering exact replacement components.
Although the housing colours provide useful visual identification, they do not independently establish conductor functions or protective earth continuity. The selected mating connector and completed electrical assembly must provide the required electrical connections and comply with applicable installation standards.
The connector's three-pole construction provides three separate electrical potentials within a compact 15 mm-wide housing. Its 5 mm pitch supports modular terminal arrangements, while the integrated coding finger can help distinguish intended connector positions when appropriately configured with compatible mating components.
The WAGO 769-103/000-039 is a pluggable female connector rather than a permanently soldered PCB terminal block. Its construction is intended to provide a removable connection interface through compatible WAGO X-COM® mating components.
Important installation information: Pluggable connectors without current-interrupting capacity must not be connected or disconnected while live or under load in accordance with IEC/EN 61984. Electrical supplies must be safely isolated before mating or unmating the connector, and protective earth continuity must be maintained as required by the installation.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 18.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 3 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 15 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Multi-coloured | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 45.2 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-103/000-039 | |
| Base model | 769-103 | |
| Product variant | Green/yellow, blue and grey housing configuration | |
| Product type | Pluggable female terminal connector | |
| Connector design | Straight, one conductor per pole | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 3 | |
| Total electrical potentials | 3 | |
| Conductors per pole | 1 | |
| Connection pitch | 5 mm | |
| Module width | 5 mm per pole | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Conductor size | 28–12 AWG | |
| Connectable conductor material | Copper | |
| Conductor stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Wiring type | Front-entry wiring | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Straight | |
| Mounting / connection type | Pluggable connection to compatible X-COM® mating components | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Plugging without loss of pin spacing | Yes | |
| Integral mismating protection | No | |
| Direct earth contact to DIN rail / housing | No | |
| Marking position | Side marking | |
| Weight | Approximately 9.6 g | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colours | Green/yellow, blue and grey | |
| Material group | I | |
| Insulation flammability classification | UL 94 V-0 | |
| Halogen-free | Yes | |
| Processing temperature range | −35 to +85 °C | |
| Continuous operating temperature range | −60 to +105 °C | |
| Connection standard | IEC/EN 61984 | |
| Approvals | CSA and UL Recognised Component | |
| Compatible male connector example | WAGO 769-603 | |
| Product group | X-COM® System | |
| Packaging unit | 50 pieces | |
| Packaging type | Box | |
| Country of origin | Germany | |
| GTIN / EAN | 4045454285142 |
The WAGO 769-103/000-039 is a three-pole X-COM® pluggable female connector designed for secure, removable electrical connections in industrial control panels, automation systems and modular electrical equipment. Its green/yellow, blue and grey housing sections support clear identification of different conductor positions.
Both connectors belong to the X-COM® 769 Series and feature three poles, CAGE CLAMP® connection technology and a 5 mm contact pitch. The difference is their colour sequence: the 769-103/000-038 uses grey, blue and green/yellow, while the 769-103/000-039 uses green/yellow, blue and grey.
The connector's blue and green/yellow housing sections support visual identification of neutral and protective earth conductors in appropriately designed electrical assemblies. However, housing colours do not independently establish conductor functions or earth continuity. Correct wiring and compatible mating components are essential.
The connector provides 3 poles, 3 conductor connection points and 3 separate electrical potentials. Each pole accepts one conductor through a CAGE CLAMP® spring pressure connection.
The connector accepts solid and fine-stranded copper conductors from 0.08–4 mm², equivalent to 28–12 AWG. Its nominal conductor cross-section is 4 mm², and the specified conductor stripping length is 8–9 mm.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent electrical contact pressure without conventional clamping screws. An appropriate operating tool opens the spring clamp for conductor insertion and removal.
No. The WAGO 769-103/000-039 is a pluggable female terminal connector rather than a permanently soldered PCB terminal block. It provides a removable electrical connection when used with compatible WAGO X-COM® mating components.
Yes. The connector features an integrated coding finger and supports variable coding with appropriately configured mating components. This can help distinguish connector positions and reduce the likelihood of incorrect mating.
The WAGO 769-603 is an example of a compatible three-pole X-COM® male connector. The selected mating component must also match the installation's mechanical coding, mounting arrangement and electrical requirements.
No. X-COM® pluggable connectors without current-interrupting capacity must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connecting or disconnecting the connector, and any required protective earth continuity must be maintained.
The connector measures 15 mm wide, 45.2 mm high and 18.3 mm deep, with a weight of approximately 9.6 g. Its 5 mm module width per pole supports compact installation in compatible X-COM® assemblies.
The manufacturer GTIN / EAN for the WAGO 769-103/000-039 is 4045454285142. This identifies the three-pole green/yellow, blue and grey connector variant.
WAGO X-COM® 769 Series female connectors provide reliable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® spring pressure connection technology, compact three-pole construction and distinctive green/yellow, blue and grey conductor identification, the WAGO 769-103/000-039 offers a practical solution for secure, organised and service-friendly electrical connections in industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.