Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.57
The WAGO 769-103/000-038 is a versatile 3-pole pluggable female connector featuring a distinctive grey, blue and green/yellow housing configuration for clearly identifiable electrical connections in industrial control panels, automation systems and modular electrical equipment. Part of the established WAGO X-COM® 769 Series, this connector incorporates proven CAGE CLAMP® spring pressure connection technology, providing reliable conductor termination without conventional screw-clamping connections.
Designed for use with compatible WAGO X-COM® carrier terminal blocks and male connectors, the WAGO 769-103/000-038 provides a removable electrical interface that simplifies installation, servicing and equipment replacement. Its three differently coloured sections enable clear identification of connections, with green/yellow commonly used for protective earth, blue for neutral and grey for other circuit connections. The integrated coding finger supports connector identification and appropriately configured mating arrangements.
With a 32 A IEC rated current, 500 V IEC rated voltage, 5 mm connection pitch and 4 mm² nominal conductor capacity, the WAGO 769-103/000-038 is suitable for industrial electrical installations requiring dependable, clearly identifiable pluggable connections. Its compact 15 mm overall width, durable polyamide housing and three-pole construction make it a practical solution for machine building, control equipment and modular electrical distribution systems.
The WAGO 769-103/000-038 belongs to the WAGO X-COM® modular pluggable terminal block system, designed to provide secure, removable electrical connections between field wiring and industrial equipment. Its female connector arrangement allows compatible mating components to be disconnected during maintenance, equipment replacement or system reconfiguration without disturbing the conductors secured in the spring-clamp terminals.
At the centre of the connector is WAGO CAGE CLAMP® spring pressure connection technology, which provides consistent electrical contact pressure without the need for conventional screw tightening. The spring-clamp arrangement supports reliable conductor termination in industrial environments exposed to vibration and temperature variations. Conductors are installed using an appropriate operating tool and the specified 8–9 mm stripping length.
A key feature of the WAGO 769-103/000-038 is its three-colour housing configuration. The grey, blue and green/yellow sections make it easier to distinguish individual conductor functions within a compact connector. In conventional electrical installations, blue commonly identifies a neutral conductor, while green/yellow identifies protective earth. The grey section can be used for a suitable additional circuit connection, depending on the system design.
This connector is particularly useful in applications where a removable interface is needed for electrical connections that must remain clearly identifiable. However, the housing colours do not independently establish conductor functions or protective earth continuity. Correct wiring, suitable mating components and compliance with applicable electrical installation standards remain essential.
Its three-pole arrangement provides three independent electrical potentials within a compact 15 mm-wide housing. The 5 mm contact pitch enables space-efficient modular connection layouts, while the integrated coding finger supports appropriately configured mating positions. Side marking facilities provide further identification options for installation and maintenance.
The WAGO 769-103/000-038 can be used with suitably selected WAGO X-COM® male connectors, carrier terminal blocks and PCB headers. Manufacturer-listed mating component examples include the WAGO 769-603 male connector and the 769-633 and 769-663 PCB header families. The connector itself is a pluggable female component, not a permanently soldered PCB terminal block.
Important installation information: Under IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be connected or disconnected while live or under load. Always safely isolate the electrical supply before mating or unmating the connector, and maintain the required protective earth continuity throughout the installation.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 18.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 3 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 15 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Multi-coloured | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 45.2 mm | |
| Halogen free | Yes | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-103/000-038 | |
| Base model | 769-103 | |
| Product variant | Grey, blue and green/yellow colour configuration | |
| Product type | Pluggable female terminal connector | |
| Connector design | Straight, one conductor per pole | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 3 | |
| Total electrical potentials | 3 | |
| Conductors per pole | 1 | |
| Rated current (IEC) | 32 A | |
| Rated voltage (IEC, III / 3) | 500 V | |
| Rated impulse voltage (IEC, III / 3) | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Connection pitch | 5 mm | |
| Module width | 5 mm per pole | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor with ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Connectable conductor materials | Copper and aluminium, subject to the manufacturer's conductor preparation and installation requirements | |
| Conductor stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Wiring type | Front-entry wiring | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Straight | |
| Mounting / connection type | Pluggable connection to compatible WAGO X-COM® mating components | |
| Marking position | Side marking | |
| Weight | Approximately 9.703 g | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colours | Grey, blue and green/yellow | |
| Insulation flammability classification | UL 94 V-0 | |
| Fire load | 0.166 MJ | |
| Electrical rating standard | IEC/EN 60664-1 | |
| Pluggable connector safety standard | IEC/EN 61984 | |
| Approvals | CSA and UL Recognised Component | |
| UL recognition file numbers | E45171 and E45172 | |
| Compatible male connector example | WAGO 769-603 | |
| Compatible straight PCB header example | WAGO 769-633 | |
| Compatible angled PCB header example | WAGO 769-663 | |
| Compatible locking lever accessories | WAGO 769-428, 769-429, 769-430 and 769-431 | |
| Compatible strain relief housing | WAGO 769-1603 | |
| Compatible strain relief plate | WAGO 769-411 | |
| Compatible miniature adjacent jumper | WAGO 769-402 | |
| Compatible insulation stops | WAGO 769-470, 769-471 and 769-472 | |
| Product group | X-COM® System | |
| Packaging unit | 50 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4045454285159 |
The WAGO 769-103/000-038 is a three-pole X-COM® pluggable female connector designed for industrial electrical connections. Its grey, blue and green/yellow housing sections provide clear visual identification for appropriately designed electrical assemblies, including applications involving neutral and protective earth conductors.
The standard WAGO 769-103 features a grey housing, while the 769-103/000-038 incorporates grey, blue and green/yellow sections for colour-coded connection identification. Both belong to the X-COM® 769 Series and feature CAGE CLAMP® technology, a 3-pole configuration, 5 mm contact pitch and 4 mm² nominal conductor capacity.
Both connectors belong to the X-COM® 769 Series and feature three poles with grey, blue and green/yellow identification. The difference is their colour sequence: the 769-103/000-038 is arranged grey, blue and green/yellow, while the 769-103/000-039 uses the reverse green/yellow, blue and grey configuration. Select the correct version for the specified wiring layout.
Yes, the connector's blue and green/yellow housing sections support visual identification of neutral and protective earth conductors within appropriately designed electrical assemblies. However, the housing colours alone do not establish conductor functions or electrical continuity. Suitable mating components and correct protective earth connections are essential.
The connector provides 3 poles, 3 conductor connection points and 3 independent electrical potentials. Each pole accepts one conductor through a CAGE CLAMP® spring pressure connection.
The WAGO 769-103/000-038 has an IEC rated current of 32 A and an IEC rated voltage of 500 V under overvoltage category III, pollution degree 3 conditions. Its rated impulse withstand voltage is 6 kV. The rating of the completed assembly must also account for the selected mating component and installation conditions.
The connector accepts solid and fine-stranded conductors from 0.08–4 mm², equivalent to 28–12 AWG. Its nominal conductor cross-section is 4 mm², and the specified conductor stripping length is 8–9 mm. Fine-stranded conductors with ferrules are supported in the range of 0.25–2.5 mm².
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent electrical contact pressure without conventional clamping screws. An appropriate operating tool is used to open the spring clamp for conductor insertion and removal.
No. The WAGO 769-103/000-038 is a pluggable female connector rather than a permanently soldered PCB terminal block. It can mate with compatible WAGO X-COM® male connectors or PCB headers to provide a removable wiring interface.
Manufacturer-listed mating component examples include the WAGO 769-603 male connector, the 769-633 straight PCB header and the 769-663 angled PCB header. The selected component must match the required electrical ratings, mechanical coding and connection arrangement.
No. Under IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connecting or disconnecting the connector, and any required protective earth continuity must be maintained.
The connector measures 15 mm wide, 45.2 mm high and 18.3 mm deep, with a weight of approximately 9.703 g. Its 5 mm contact pitch supports compact modular installation.
The manufacturer GTIN / EAN for the WAGO 769-103/000-038 is 4045454285159. This identifies the specific three-pole grey, blue and green/yellow connector variant.
WAGO X-COM® 769 Series female connectors provide dependable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® spring pressure connection technology, compact three-pole construction and distinctive grey, blue and green/yellow conductor identification, the WAGO 769-103/000-038 offers a practical solution for secure, clearly identifiable and service-friendly electrical connections in modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.