Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.41
The WAGO 769-103/000-037 is a compact 3-pole pluggable female connector featuring a grey and green/yellow housing configuration for clearly identifiable electrical connections in industrial control panels, automation systems and modular electrical equipment. Part of the established WAGO X-COM® 769 Series, it uses proven CAGE CLAMP® spring pressure connection technology to provide dependable conductor termination without conventional clamping screws.
Designed for use with compatible WAGO X-COM® carrier terminal blocks and male connector components, the WAGO 769-103/000-037 provides a removable electrical connection interface that simplifies installation, equipment servicing and modular system assembly. Its straight, front-entry conductor connections enable convenient wiring, while the integrated coding finger supports connector identification. The combination of grey and green/yellow housing sections is particularly useful where protective earth identification must be distinguished from other electrical connections.
With a 4 mm² nominal conductor capacity, 5 mm contact spacing and 15 mm overall width, the WAGO 769-103/000-037 provides a space-efficient solution for industrial electrical installations. The connector belongs to WAGO's X-COM® family of pluggable connectors, which offers 32 A IEC rated current and 500 V IEC rated voltage for the applicable connector configuration and installation conditions.
The WAGO 769-103/000-037 belongs to the WAGO X-COM® modular pluggable terminal block system, developed to simplify electrical connections in industrial control panels, switchgear and automation equipment. Its pluggable female connector construction allows suitably matched components to be disconnected during servicing, equipment replacement or system reconfiguration without removing conductors from their spring-clamp terminations.
The connector uses proven CAGE CLAMP® spring pressure connection technology, designed to maintain consistent contact pressure on electrical conductors without conventional clamping screws. This supports dependable electrical connectivity in environments subject to mechanical vibration and temperature variation. Conductors are terminated using an appropriate operating tool, with an 8–9 mm stripping length for correct conductor preparation.
A distinguishing feature of the WAGO 769-103/000-037 is its mixed grey and green/yellow housing configuration. The green/yellow section provides visual identification associated with protective conductors, while the grey sections allow other electrical connections to be distinguished within the same connector. This makes the product particularly useful in modular electrical installations that incorporate protective earth identification alongside other conductor connections.
The 769-103/000-037 is a distinct colour configuration from the 769-103/000-036. Although both variants combine grey and green/yellow insulation and share the same X-COM® connector platform, their colour arrangements differ. The full manufacturer part number should therefore be checked when replacing an existing connector or selecting a connector for a specified wiring layout.
The three-pole design provides three separate electrical connection points within a compact 15 mm-wide housing. Its 5 mm connection pitch supports modular terminal arrangements, while the integrated coding finger helps establish appropriately configured mating positions. The side marking facility also supports clear circuit identification during installation and maintenance.
The green/yellow housing identification does not independently provide an earth connection to a DIN rail or equipment enclosure. Where the connector forms part of a protective earth circuit, the completed assembly must include suitable mating components and conductive connections that maintain the required protective earth continuity.
The WAGO 769-103/000-037 is a pluggable female connector rather than a permanently soldered PCB terminal block. It is designed for use with compatible WAGO X-COM® mating components, allowing connected conductors to remain secured within the female connector when the pluggable interface is separated.
Important installation information: In accordance with IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be connected or disconnected while live or under load. The electrical supply must be safely isolated before mating or unmating the connector, and protective conductor continuity must be maintained in accordance with applicable electrical safety requirements.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 18.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 3 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 15 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Multi-coloured | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 45.2 mm | |
| Halogen free | Yes | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-103/000-037 | |
| Base model | 769-103 | |
| Product variant | Grey/green-yellow housing configuration | |
| Product type | Pluggable female terminal connector | |
| Connector design | Straight, one conductor per pole | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 3 | |
| Total electrical potentials | 3 | |
| Conductors per pole | 1 | |
| Rated current (IEC) | 32 A | |
| Rated voltage (IEC, III / 3) | 500 V | |
| Rated impulse voltage (IEC, III / 3) | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Connection pitch | 5 mm | |
| Module width | 5 mm per pole | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Wiring type | Front-entry wiring | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Straight | |
| Mounting / connection type | Pluggable connection to compatible X-COM® mating components | |
| Marking position | Side marking | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colours | Grey and green/yellow | |
| Insulation flammability classification | UL 94 V-0 | |
| Connection standard | IEC/EN 61984 | |
| Insulation coordination standard | IEC/EN 60664-1 | |
| Certification | CSA | |
| Product group | X-COM® System | |
| Packaging unit | 50 pieces | |
| Packaging type | Box | |
| Country of origin | Germany | |
| GTIN / EAN | 4045454271527 |
The WAGO 769-103/000-037 is a three-pole X-COM® pluggable female connector designed for removable electrical connections in industrial automation, control panels and modular electrical equipment. Its mixed grey and green/yellow housing helps identify different conductor functions, including protective earth connections in appropriately designed assemblies.
Both products are three-pole X-COM® female connectors with CAGE CLAMP® technology, 5 mm contact spacing and 4 mm² nominal conductor capacity. The key difference is the arrangement of their grey and green/yellow housing sections. They have separate manufacturer part numbers and should be selected according to the required conductor identification layout.
The connector incorporates green/yellow identification associated with protective earth conductors. It can be used in properly designed protective conductor arrangements with suitable X-COM® mating components. However, the housing colour alone does not create an earth connection, and protective conductor continuity must be provided by the completed electrical assembly.
The connector provides 3 poles, 3 conductor connection points and 3 separate electrical potentials. Each pole accepts one conductor through a CAGE CLAMP® spring pressure connection.
The WAGO 769-103/000-037 belongs to the X-COM® 769 Series, with an IEC rated current of 32 A and IEC rated voltage of 500 V under overvoltage category III, pollution degree 3 conditions. Its rated impulse voltage is 6 kV. The applicable rating of the completed connector assembly must also account for the selected mating component.
The connector supports solid and fine-stranded conductors from 0.08–4 mm², equivalent to 28–12 AWG. Its nominal conductor cross-section is 4 mm², and the specified conductor stripping length is 8–9 mm.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain dependable electrical contact pressure without conventional conductor clamping screws. A suitable operating tool opens the spring clamp to allow conductor insertion or removal.
No. The WAGO 769-103/000-037 is a pluggable female connector rather than a permanently soldered PCB terminal block. It provides a removable electrical interface when used with compatible WAGO X-COM® mating components.
Yes. The WAGO 769-103/000-037 features an integrated coding finger that supports connector coding with appropriately configured mating components. This helps distinguish intended connector positions within modular electrical assemblies.
No. The WAGO 769-103/000-037 is a pluggable connector without current-interrupting capacity. Under IEC/EN 61984, the connector must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connection or disconnection, and any required protective earth continuity must be maintained.
The connector uses the standard three-pole X-COM® female connector format, measuring 15 mm wide, 45.2 mm high and 18.3 mm deep. Its 5 mm module width per pole supports compact installation in compatible X-COM® terminal assemblies.
The GTIN / EAN for the WAGO 769-103/000-037 is 4045454271527. This identifies the specific three-pole grey and green/yellow connector variant.
WAGO X-COM® 769 Series female connectors provide dependable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® spring pressure connection technology, compact three-pole construction and distinctive grey and green/yellow conductor identification, the WAGO 769-103/000-037 offers a practical solution for secure, clearly identifiable and service-friendly electrical connections in modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.