Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.02
The WAGO 769-101 is a compact, reliable 1-pole pluggable female terminal connector designed for secure and convenient electrical connections in industrial automation, control panels and electrical distribution systems. As part of the established WAGO X-COM® 769 Series, it features proven CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw-clamping connections.
Designed for use with compatible X-COM® carrier terminal blocks, the WAGO 769-101 provides a removable connection interface that simplifies electrical installation, equipment servicing and modular system assembly. Its straight, front-entry conductor connection enables convenient wiring, while the integrated coding finger supports connector identification and helps prevent incorrect mating when used with appropriately configured carrier terminal blocks.
With a 32 A IEC rated current, 500 V IEC rated voltage and 5 mm module width, the WAGO 769-101 offers an effective solution for compact industrial electrical installations. Its 4 mm² nominal conductor capacity, durable grey insulating housing and pluggable construction make it suitable for modular control systems and electrical equipment requiring reliable, removable conductor connections.
The WAGO 769-101 is part of the WAGO X-COM® modular pluggable terminal block system, designed to simplify electrical connections between field wiring and industrial control equipment. Unlike fixed terminal connections, the X-COM® system allows appropriately matched female connectors to be disconnected from carrier terminal blocks, supporting convenient equipment servicing, replacement and modular assembly.
The connector incorporates proven CAGE CLAMP® spring pressure connection technology, which maintains consistent contact pressure on copper conductors without relying on conventional clamping screws. This helps provide dependable electrical contact in environments exposed to mechanical vibration and temperature variations. Conductors are terminated using a suitable operating tool, with a recommended 8–9 mm stripping length for correct preparation.
Its single-pole, 5 mm modular construction is suitable for compact terminal assemblies. The connector features an integrated coding finger to support correctly configured mating arrangements, while compatibility with the X-COM® system enables flexible electrical distribution, control signal and power connection solutions.
The WAGO 769-101 is a pluggable female connector rather than a PCB solder terminal block. It is intended to mate with compatible WAGO X-COM® carrier terminal blocks, allowing conductors to remain secured within the female connector when the pluggable interface is disconnected.
Important installation information: Under IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be connected or disconnected while energised or under load. The electrical supply must be safely isolated before mating or unmating the connector.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 18.3 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 1 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 5 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 45.2 mm | |
| Halogen free | Yes | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-101 | |
| Product type | Pluggable female terminal connector | |
| Connector design | Straight, 1-conductor female plug | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 1 | |
| Total electrical potentials | 1 | |
| Number of conductors per connection | 1 | |
| Rated current (IEC) | 32 A | |
| Nominal voltage (IEC, III / 3) | 500 V | |
| Rated impulse voltage (IEC, III / 3) | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 300 V | |
| Rated current (UL) | 20 A | |
| Rated voltage (CSA) | 300 V | |
| Rated current (CSA) | 20 A | |
| Connection pitch / module width | 5 mm | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Connectable conductor material | Copper | |
| Conductor stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Wiring type | Front-entry wiring | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Straight | |
| Mounting / connection type | Pluggable connection to compatible X-COM® carrier terminal blocks | |
| Marking position | Side marking | |
| Weight | approx. 3.4 g | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colour | Grey | |
| Insulation flammability classification | UL 94 V-0 | |
| Fire load | 0.054 MJ | |
| Connection standard | IEC/EN 61984 | |
| Additional standards / approvals | EN 60947, UL 1059, UL 1977, CSA | |
| Marine approvals | ABS, Bureau Veritas, DNV and Lloyd's Register | |
| Compatible operating tool | WAGO 210-490 | |
| Compatible push-button accessory | WAGO 769-434 | |
| Compatible carrier terminal examples | WAGO 769-201, 769-211, 769-221 and 769-251 | |
| Product group | X-COM® System | |
| Packaging unit | 200 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918471268 |
The WAGO 769-101 is a single-pole pluggable female connector used with compatible WAGO X-COM® carrier terminal blocks. It provides secure electrical conductor termination and a removable connection interface for industrial control panels, automation systems and modular electrical equipment.
No. The WAGO 769-101 is a pluggable female terminal connector rather than a PCB solder terminal block. It connects to compatible WAGO X-COM® carrier terminals, allowing electrical wiring to be connected or disconnected through a modular plug-in interface.
The WAGO 769-101 has a 32 A IEC rated current and a 500 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions. It also has a 6 kV rated impulse voltage. The applicable UL and CSA ratings are 300 V and 20 A.
The connector accepts solid and fine-stranded copper conductors from 0.08–4 mm², equivalent to 28–12 AWG. The recommended conductor stripping length is 8–9 mm.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent contact pressure on electrical conductors without conventional clamping screws. On the WAGO 769-101, a suitable operating tool is used to open the spring clamp for conductor insertion and removal.
The WAGO 769-101 is the standard straight, front-entry female connector, while the 769-101/022-000 is an angled connection variant. Both belong to the X-COM® 769 Series and provide a single-pole CAGE CLAMP® connection, but their physical dimensions and conductor entry arrangements differ.
The integrated coding finger is part of the WAGO X-COM® connector coding system. When used with appropriately configured mating components, coding helps identify intended connector positions and reduces the risk of connecting a plug to an incorrect terminal location.
No. The WAGO 769-101 is a pluggable connector without current-interrupting capability. Under IEC/EN 61984, this type of connector must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connecting or disconnecting the plug.
The connector measures 5 mm wide, 45.2 mm high and 18.3 mm deep. Its compact 5 mm module width supports space-efficient installation in compatible X-COM® terminal assemblies.
Yes. The WAGO 769-101 features a durable polyamide 66 insulating housing, proven CAGE CLAMP® spring pressure connection technology and an IEC rated current of 32 A. Its pluggable design is suitable for industrial automation and modular electrical equipment when installed within the specified electrical ratings and environmental conditions.
WAGO X-COM® 769 Series female connectors provide dependable, modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® technology, compact pluggable construction and reliable conductor termination, the WAGO 769-101 offers a practical solution for secure and service-friendly electrical connections in modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.