Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.12
The WAGO 769-101/022-016 is a compact and reliable 1-pole angled pluggable female connector featuring a distinctive green/yellow insulating housing for protective conductor identification in industrial electrical installations. As part of the established WAGO X-COM® 769 Series, it incorporates proven CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw-clamping connections.
Designed for use with compatible WAGO X-COM® carrier terminal blocks, the WAGO 769-101/022-016 provides a removable electrical connection interface that simplifies installation, equipment servicing and modular system assembly. Its 45° angled conductor entry improves wiring accessibility and cable routing flexibility, particularly in compact control panels and electrical enclosures. The integrated coding finger supports configurable connector identification, while the green/yellow housing provides clear visual identification for appropriately designed protective earth (PE) connection arrangements.
With a 4 mm² nominal conductor capacity, a 0.08–4 mm² conductor connection range and compact 5 mm module width, the WAGO 769-101/022-016 is designed for space-efficient industrial electrical connections. Its durable polyamide housing, angled construction and modular pluggable interface make it a practical solution for industrial control panels, protective conductor assemblies and automation equipment requiring reliable, removable conductor connections.
The WAGO 769-101/022-016 forms part of the WAGO X-COM® modular pluggable terminal block system, developed to simplify electrical connections in industrial control panels, switchgear and automation equipment. Unlike permanently fixed terminal connections, the X-COM® system allows compatible female connectors to be disconnected from their carrier terminal blocks, supporting convenient equipment servicing, replacement and modular system assembly.
The connector incorporates proven CAGE CLAMP® spring pressure connection technology, which maintains consistent contact pressure on connected copper conductors without conventional clamping screws. This supports dependable electrical connectivity in industrial environments exposed to mechanical vibration and temperature variations. Conductors are terminated using a suitable operating tool, with an 8–9 mm stripping length for correct conductor preparation.
A distinguishing feature of the WAGO 769-101/022-016 is its 45° angled conductor entry. Compared with straight-entry X-COM® female connectors, this configuration directs incoming conductors at an angle relative to the connector mating direction. It provides an alternative cable routing arrangement that can improve access and simplify wiring in compact electrical enclosures.
The green/yellow insulating housing makes this version particularly suitable for protective conductor identification. Green/yellow is the recognised colour combination for protective earth conductors in electrical installations. When used with appropriately designed and approved X-COM® ground carrier terminal blocks, the connector can form part of a protective earthing or equipotential bonding arrangement.
The connector itself does not establish a direct electrical connection to a DIN rail or equipment housing. Protective earth continuity depends on the selected mating ground terminal, its conductive connections and the completed installation. The green/yellow housing provides visual identification but does not independently guarantee an earth connection.
Its single-pole, 5 mm modular construction supports compact electrical assemblies, while the integrated coding finger enables variable coding with appropriately configured mating components. Anti-rotation protection helps maintain correct connector positioning, and the side marking facility supports clear terminal identification during installation and maintenance.
The WAGO 769-101/022-016 is a pluggable female connector rather than a PCB solder terminal block. It is designed to mate with compatible WAGO X-COM® carrier terminal blocks, allowing connected conductors to remain securely terminated within the female connector when the plug-in interface is disconnected.
Important installation information: In accordance with IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be connected or disconnected while energised or under load. The electrical supply must be safely isolated before mating or unmating the connector. When incorporated into a protective earth circuit, the completed installation must maintain protective conductor continuity in accordance with applicable safety requirements.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Green/Yellow | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 26.5 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 1 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 5 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Green/yellow | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 37.1 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-101/022-016 | |
| Base model | 769-101 | |
| Product variant | Angled green/yellow housing version | |
| Product type | Pluggable female terminal connector | |
| Connector design | Angled, 1-conductor female connector | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 1 | |
| Total electrical potentials | 1 | |
| Number of conductors per connection | 1 | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Connectable conductor material | Copper | |
| Conductor stripping length | 8–9 mm | |
| Connection pitch | 5 mm | |
| Module width | 5 mm | |
| Actuation type | Operating tool | |
| Wiring type | Front-entry wiring | |
| Conductor entry angle | 45° relative to mating direction | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Angled | |
| Mounting / connection type | Pluggable connection to compatible X-COM® carrier terminal blocks | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Plugging without loss of pin spacing | Yes | |
| Integral mismating protection | No | |
| Direct ground contact to DIN rail / housing | No | |
| Marking position | Side marking | |
| Weight | 2.5 g | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colour | Green/yellow | |
| Material group | I | |
| Insulation flammability classification | UL 94 V-0 | |
| Halogen-free | Yes | |
| Fire load | 0.045 MJ | |
| Processing temperature range | −35 to +85 °C | |
| Continuous operating temperature range | −60 to +105 °C | |
| Connection standard | IEC/EN 61984 | |
| Standards / approvals | EN 60947, IEC/EN 61984, UL 1977, UL 1059, CSA C22.2 | |
| Marine approval | American Bureau of Shipping (ABS) | |
| RoHS compliance | Compliant, no exemption | |
| Compatible ground carrier terminal examples | WAGO 769-237, 769-257, 769-227, 870-107, 870-157 and 870-1137 | |
| Compatible strain relief plate | WAGO 769-410 | |
| Compatible operating tool | WAGO 769-434 | |
| Compatible test plug | WAGO 210-136 | |
| Compatible marking accessories | WAGO Mini-WSB markers | |
| Product group | 18 (X-COM® System) | |
| Packaging unit | 100 pieces | |
| Packaging type | Box | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918546348 |
The WAGO 769-101/022-016 is a green/yellow single-pole angled pluggable female connector designed for use with compatible WAGO X-COM® carrier terminal blocks. It provides secure conductor termination and a removable electrical interface for industrial control panels, automation systems and protective conductor connection assemblies.
The WAGO 769-101/022-000 is the standard grey angled female connector, while the 769-101/022-016 is the green/yellow angled variant. Both belong to the X-COM® 769 Series and feature CAGE CLAMP® spring connection technology, a 45° conductor entry angle, 5 mm module width and 4 mm² nominal conductor capacity. The green/yellow version supports protective conductor identification.
Yes. The WAGO 769-101/022-016 features a green/yellow housing suitable for protective earth identification and can be used with appropriately selected WAGO X-COM® ground carrier terminal blocks. The completed assembly must provide the required protective conductor continuity, as the female connector does not independently establish a direct earth connection to the DIN rail or equipment housing.
The connector accepts solid and fine-stranded copper conductors from 0.08–4 mm², equivalent to 28–12 AWG. Its nominal conductor cross-section is 4 mm², and the specified conductor stripping length is 8–9 mm.
The 45° angled conductor entry allows incoming conductors to approach the connector at an angle relative to its mating direction. This provides greater flexibility when routing cables and can improve wiring accessibility in compact control panels, switchgear assemblies and electrical enclosures.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent contact pressure on electrical conductors without conventional clamping screws. On the WAGO 769-101/022-016, a suitable operating tool is used to open the spring clamp for conductor insertion and removal.
No. The WAGO 769-101/022-016 is a pluggable female terminal connector rather than a PCB solder terminal block. It mates with compatible WAGO X-COM® carrier terminals to provide a removable electrical connection between terminated conductors and the carrier terminal assembly.
The WAGO 769-101/022-016 is designed for compatible WAGO X-COM® carrier terminal blocks. Manufacturer-listed ground terminal examples include WAGO 769-237, 769-257 and 769-227, alongside compatible double-deck ground terminal arrangements from the 870 Series. The selected mating component must meet the connector's mechanical coding and application requirements.
No. The WAGO 769-101/022-016 is a pluggable connector without current-interrupting capability. Under IEC/EN 61984, this type of connector must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connecting or disconnecting the plug, and protective earth continuity must be maintained in accordance with applicable safety requirements.
The connector measures 5 mm wide, 37.1 mm high and 26.5 mm deep, with a weight of approximately 2.5 g. Its compact 5 mm module width supports space-efficient installation in compatible WAGO X-COM® terminal assemblies.
The manufacturer's product-specific technical data does not assign separate numerical voltage and current ratings to this female connector. The applicable electrical rating is determined by the complete connector assembly, compatible mating components and relevant approval conditions. Its documented nominal conductor capacity is 4 mm².
Yes. The WAGO 769-101/022-016 features a durable polyamide 66 insulating housing, a UL 94 V-0 flammability classification and a continuous operating temperature range of −60 to +105 °C. Its CAGE CLAMP® spring pressure connection technology supports dependable conductor termination in industrial applications when used with suitable mating components and within specified operating conditions.
WAGO X-COM® 769 Series female connectors provide dependable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® technology, convenient 45° angled conductor entry and distinctive green/yellow protective conductor identification, the WAGO 769-101/022-016 offers a practical solution for secure, accessible and service-friendly electrical connections in industrial control and protective earthing systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.