Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.02
The WAGO 769-101/022-000 is a compact and reliable 1-pole angled pluggable female connector designed for secure electrical connections in industrial automation, control panels and modular electrical distribution systems. As part of the established WAGO X-COM® 769 Series, it incorporates proven CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw-clamping connections.
Designed for use with compatible WAGO X-COM® carrier terminal blocks and male connectors, the WAGO 769-101/022-000 provides a removable electrical connection interface that simplifies installation, servicing and modular equipment assembly. Its distinctive 45° angled conductor entry improves wiring accessibility in installations where space or cable routing requirements make straight-entry connectors less convenient. An integrated coding finger supports configurable connector identification, while the compact modular design allows efficient use of available panel space.
With a 32 A IEC rated current, 500 V IEC rated voltage and 5 mm module width, the WAGO 769-101/022-000 provides reliable electrical connectivity for industrial control and distribution applications. Its 4 mm² nominal conductor capacity, grey polyamide housing and angled pluggable construction make it particularly suitable for modular terminal assemblies, machinery control systems and electrical equipment requiring secure, removable conductor connections.
The WAGO 769-101/022-000 forms part of the WAGO X-COM® modular pluggable terminal block system, developed to simplify electrical connections in industrial control panels, switchgear and automation equipment. Unlike permanently fixed terminal connections, the X-COM® system allows compatible female connectors to be disconnected from their mating carrier terminals, supporting convenient servicing, modular equipment replacement and flexible electrical system assembly.
The connector incorporates proven CAGE CLAMP® spring pressure connection technology, which maintains consistent contact pressure on electrical conductors without conventional clamping screws. This supports dependable electrical connectivity in industrial environments exposed to mechanical vibration and temperature variations. Conductors are terminated using a suitable operating tool, with an 8–9 mm stripping length for correct conductor preparation.
A distinguishing feature of the WAGO 769-101/022-000 is its 45° angled conductor entry. Unlike the straight-entry WAGO 769-101, this configuration directs incoming conductors at an angle to the connector's mating direction, offering an alternative cable routing arrangement for electrical assemblies where available space and wiring accessibility are important.
Its single-pole, 5 mm modular construction supports compact terminal installations, while the integrated coding finger enables variable coding with appropriately configured mating components. Anti-rotation protection helps maintain correct connector alignment, and the side marking facility supports identification of electrical connections during installation and maintenance.
The WAGO 769-101/022-000 is a pluggable female connector rather than a PCB solder terminal block. It is intended to mate with compatible WAGO X-COM® carrier terminal blocks or male connectors, allowing connected conductors to remain securely terminated within the female connector when the pluggable interface is disconnected.
Important installation information: According to IEC/EN 61984, pluggable connectors without current-interrupting capacity must not be connected or disconnected while energised or under load. The electrical supply must be safely isolated before mating or unmating the connector.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Product Series | WAGO 769 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 26.5 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 1 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of clamp positions per pole | 1 | |
| Rated voltage | 500 V | |
| Width | 5 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Depth | 37.1 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | X-COM® 769 Series | |
| Model | 769-101/022-000 | |
| Base model | 769-101 | |
| Product variant | Angled conductor entry version | |
| Product type | Pluggable female terminal connector | |
| Connector design | Angled, 1-conductor female connector | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Total connection points | 1 | |
| Total electrical potentials | 1 | |
| Number of conductors per connection | 1 | |
| Rated current (IEC) | 32 A | |
| Nominal voltage (IEC, III / 3) | 500 V | |
| Rated impulse voltage (IEC, III / 3) | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Rated voltage (UL) | 300 V | |
| Rated current (UL) | 20 A | |
| Rated voltage (CSA) | 300 V | |
| Rated current (CSA) | 20 A | |
| Connection pitch | 5 mm | |
| Module width | 5 mm | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor with ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Connectable conductor material | Copper | |
| Conductor stripping length | 8–9 mm | |
| Actuation type | Operating tool | |
| Wiring type | Angled front-entry wiring | |
| Conductor entry angle | 45° relative to mating direction | |
| Plug-in contact type | Female connector / socket | |
| Connector orientation | Angled | |
| Mounting / connection type | Pluggable connection to compatible X-COM® carrier terminal blocks or male connectors | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Plugging without loss of pin spacing | Yes | |
| Integral mismating protection | No | |
| Direct ground contact to DIN rail / housing | No | |
| Marking position | Side marking | |
| Weight | approx. 2.5 g | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colour | Grey | |
| Material group | I | |
| Insulation flammability classification | UL 94 V-0 | |
| Halogen-free | Yes | |
| Fire load | 0.061 MJ | |
| Processing temperature range | −35 to +85 °C | |
| Continuous operating temperature range | −60 to +105 °C | |
| Connection standard | IEC/EN 61984 | |
| Additional standards / approvals | EN 60947, UL 1059, UL 1977, CSA C22.2 | |
| Marine approvals | ABS and DNV | |
| RoHS compliance | Compliant, no exemption | |
| Compatible carrier terminal example | WAGO 769-161 | |
| Compatible component carrier terminal example | WAGO 769-218/281-410 | |
| Product group | X-COM® System | |
| Packaging unit | 200 pieces | |
| Packaging type | Box | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918840088 |
The WAGO 769-101/022-000 is a single-pole angled pluggable female connector used with compatible WAGO X-COM® carrier terminal blocks. It provides secure conductor termination and a removable electrical connection interface for industrial control panels, automation systems and modular electrical equipment.
The standard WAGO 769-101 is a straight-entry female connector, while the 769-101/022-000 features a 45° angled conductor entry. Both belong to the X-COM® 769 Series and use CAGE CLAMP® spring connection technology, with a single-pole configuration, 5 mm module width and 4 mm² nominal conductor capacity. The angled version measures 37.1 × 5 × 26.5 mm, compared with 45.2 × 5 × 18.3 mm for the straight version.
The WAGO 769-101/022-000 has a 32 A IEC rated current and a 500 V IEC rated voltage under overvoltage category III, pollution degree 3 conditions. It also features a 6 kV rated impulse voltage. The applicable UL and CSA ratings are 300 V and 20 A.
The connector accepts solid and fine-stranded copper conductors from 0.08–4 mm², equivalent to 28–12 AWG. Fine-stranded conductors with ferrules can be connected in the range of 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The 45° angled conductor entry allows incoming conductors to approach the connector at an angle relative to its mating direction. This provides an alternative cable routing arrangement that can improve wiring accessibility and simplify installation in electrical control panels or equipment with limited space.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain consistent contact pressure on electrical conductors without conventional clamping screws. On the WAGO 769-101/022-000, an operating tool is used to open the spring clamp for conductor insertion and removal.
No. The WAGO 769-101/022-000 is a pluggable female terminal connector rather than a PCB solder terminal block. It mates with compatible WAGO X-COM® carrier terminals or male connectors, providing a removable electrical connection between terminated conductors and the mating terminal assembly.
The WAGO 769-101/022-000 is designed for compatible WAGO X-COM® carrier terminal blocks and male connectors. Manufacturer-listed examples include the WAGO 769-161 carrier terminal block and compatible component carrier terminals such as the 769-218/281-410. The selected mating component must be compatible with the connector's mechanical coding, connection geometry and electrical requirements.
No. The WAGO 769-101/022-000 is a pluggable connector without current-interrupting capability. Under IEC/EN 61984, this type of connector must not be mated or unmated while live or under load. The electrical supply must be safely isolated before connecting or disconnecting the plug.
The connector measures 5 mm wide, 37.1 mm high and 26.5 mm deep, with an approximate weight of 2.5 g. Its compact 5 mm module width supports space-efficient installation in compatible X-COM® terminal assemblies.
Yes. The WAGO 769-101/022-000 features a durable polyamide 66 insulating housing, a UL 94 V-0 flammability classification and a continuous operating temperature range of −60 to +105 °C. Its CAGE CLAMP® connection technology provides dependable conductor termination for industrial applications when installed within the specified electrical ratings and environmental conditions.
WAGO X-COM® 769 Series female connectors provide dependable modular electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven CAGE CLAMP® technology, compact pluggable construction and a convenient 45° angled conductor entry, the WAGO 769-101/022-000 offers a practical solution for secure, accessible and service-friendly electrical connections in modern industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.