Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.16
The WAGO 746-2305 is a robust, high-performance 5-pole, 2-conductor PCB terminal block designed for secure electrical connections in industrial control equipment, power distribution systems and electronic assemblies. As part of the established WAGO 746 Series, it features advanced Push-in CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw-clamping connections.
Designed for through-hole printed circuit board mounting, the WAGO 746-2305 combines high current-carrying capability with straightforward installation and long-term connection reliability. Its five-pole configuration provides ten conductor connection points across two levels, enabling two conductors to be connected to each electrical potential. This makes it particularly suitable for power supply connections, electrical distribution and industrial control assemblies requiring multiple conductor terminations.
With a 50 A IEC rated current, an IEC rated voltage of up to 1000 V under specified insulation coordination conditions, and a 7.5 mm pin spacing, the WAGO 746-2305 is designed for demanding industrial applications. Its 10 mm² nominal conductor capacity, angled conductor entry and durable grey polyamide housing provide a practical solution for high-current PCB wiring.
The WAGO 746-2305 incorporates advanced Push-in CAGE CLAMP® spring pressure connection technology to provide dependable electrical contact between connected conductors and printed circuit boards. Unlike conventional screw-clamping terminals, the spring mechanism maintains consistent contact pressure without requiring regular retightening, helping reduce connection maintenance requirements and support reliable operation in industrial environments.
The terminal block features a five-pole, two-conductor connection arrangement, providing ten conductor connection points across five independent electrical potentials. Two conductors can be terminated at each pole, making the terminal block particularly useful for electrical supply distribution, circuit connections and PCB assemblies requiring multiple conductor entry points.
Solid conductors and suitably ferruled fine-stranded conductors can be inserted directly into the Push-in CAGE CLAMP® connection, simplifying installation during manufacturing and maintenance. Other compatible conductor types can be connected using an appropriate operating tool, which also allows individual conductors to be released when required. The 13–15 mm stripping length helps ensure conductors are correctly prepared for secure termination.
The 45° angled conductor entry improves access when wiring electrical assemblies, while the staggered double solder pin arrangement provides stable through-hole PCB mounting. Its durable polyamide insulating housing, high electrical ratings and broad conductor compatibility make the WAGO 746-2305 a practical choice for industrial equipment manufacturers and electrical automation engineers.
Tick the specs you need, then view products that match.
| Current | 50 A | |
|---|---|---|
| Voltage | 1000 V | |
| Number of Levels | 2 | |
| Product Series | WAGO 746 | |
| Rated surge voltage | 8 kV | |
| Angle PCB/conductor connection | 45°/135° (downwards inclined) | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 50 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 10 mm² | |
| Number of electrical connections | 5 | |
| Material insulation body | Thermoplastic | |
| Number of levels | 2 | |
| Connectable conductor cross section multi-wired | 0.5 – 10 mm² | |
| Housing colour | Grey | |
| Type of fastening | Solder | |
| Connection type PCB | Soldering connection | |
| Length pin | 4.4 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.5 – 6 mm² | |
| Height | 36.9 mm | |
| Modular spacing connections | 7.5 mm | |
| Material connection surface | Tin | |
| Type of banding | None | |
| Rated voltage | 1000 V | |
| Connectable conductor cross section solid-core | 0.5 – 10 mm² | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Connection type conductor | Spring clamp connection | |
| Manufacturer | WAGO | |
| Series | 746 Series | |
| Model | 746-2305 | |
| Product type | 2-conductor PCB terminal block | |
| Connection technology | Push-in CAGE CLAMP® spring pressure connection | |
| Number of poles | 5 | |
| Total connection points | 10 | |
| Total electrical potentials | 5 | |
| Number of connection types | 1 | |
| Conductors per pole | 2 | |
| Rated current (IEC) | 50 A | |
| Rated voltage (IEC, III / 3) | 800 V | |
| Rated voltage (IEC, III / 2) | 1000 V | |
| Rated voltage (IEC, II / 2) | 1000 V | |
| Rated impulse voltage | 8 kV | |
| Rated voltage (UL 1059, Use Group B) | 600 V | |
| Rated current (UL 1059, Use Group B) | 50 A | |
| Rated voltage (UL 1059, Use Group C) | 600 V | |
| Rated current (UL 1059, Use Group C) | 50 A | |
| Rated voltage (CSA, Use Groups B and C) | 600 V | |
| Rated current (CSA, Use Groups B and C) | 44 A | |
| Pin spacing / pitch | 7.5 mm | |
| Nominal conductor cross-section | 10 mm² | |
| Solid conductor cross-section | 0.5–10 mm² | |
| Fine-stranded conductor without ferrule | 0.5–10 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–6 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.5–6 mm² | |
| Conductor size (AWG) | 20–8 AWG | |
| Conductor stripping length | 13–15 mm | |
| Actuation type | Operating tool / screwdriver | |
| Conductor entry angle | 45° / 135° downward-inclined | |
| PCB connection type | Solder connection | |
| PCB contact | Through-hole technology (THT) | |
| Mounting type | Through-hole PCB mounting | |
| Solder pin arrangement | Staggered across terminal strip | |
| Number of solder pins per potential | 2 | |
| Solder pin length | 4.4 mm | |
| Solder pin dimensions | 1.6 × 1.2 mm | |
| PCB drilled hole diameter | 2.2 mm (+0.1 mm tolerance) | |
| Width | 40.2 mm | |
| Height above PCB surface | 36.9 mm | |
| Depth | 37 mm | |
| Weight | approx. 39.8 g | |
| Housing material | Polyamide 66 (PA66) | |
| Material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Insulation flammability classification | UL 94 V-0 | |
| Limit temperature range | −60 to +105 °C | |
| Standards / approvals | IEC/EN 60664-1, UL 1059, CSA, EN 60947 | |
| RoHS compliance | Compliant, no exemption | |
| Country of origin | Poland | |
| Packaging unit | 24 pieces | |
| GTIN / EAN | 4045454123260 |
The WAGO 746-2305 is a 5-pole, 2-conductor PCB terminal block designed to connect electrical conductors securely to printed circuit boards in industrial control equipment, power distribution systems and electronic assemblies.
The terminal block provides 5 poles and 10 conductor connection points across two levels. Each pole allows two conductors to be connected to the same electrical potential, making it suitable for power supply distribution and multi-conductor electrical wiring.
The WAGO 746-2305 has a 50 A IEC rated current and an IEC rated voltage of 800 V under overvoltage category III, pollution degree 3 conditions or 1000 V under overvoltage category III, pollution degree 2 conditions. It also features an 8 kV rated impulse voltage and a 600 V UL voltage rating for Use Groups B and C.
The terminal block accepts solid and fine-stranded conductors without ferrules from 0.5–10 mm², corresponding to 20–8 AWG. Fine-stranded conductors fitted with insulated or uninsulated ferrules can be connected in the range of 0.5–6 mm².
Push-in CAGE CLAMP® is WAGO's spring pressure connection technology that allows solid and suitably ferruled conductors to be inserted directly into the terminal without first opening the spring clamp. The mechanism maintains consistent contact pressure, while an operating tool enables other compatible conductor types to be connected or removed.
The WAGO 746-2305 features a 7.5 mm pin spacing, providing a consistent connection pitch across its five electrical poles. Its overall width is 40.2 mm, with a height of 41.3 mm and a depth of 37 mm.
The terminal block is designed for through-hole technology (THT) solder mounting onto printed circuit boards. It features two solder pins per electrical potential, with a staggered arrangement that provides mechanical stability and reliable electrical contact with the PCB. The solder pins measure 4.4 mm in length.
Yes. The WAGO 746-2305 features two conductor connections per pole, allowing electrical supply connections and distribution wiring within suitably designed PCB assemblies. Its 50 A rated current and 10 mm² nominal conductor capacity make it suitable for high-current connections when used within the manufacturer's electrical ratings and installation requirements.
Yes. The WAGO 746-2305 features a durable polyamide 66 insulating housing, a UL 94 V-0 flammability classification and a specified limit temperature range of −60 to +105 °C. Its Push-in CAGE CLAMP® connection technology provides reliable electrical contact for industrial applications, subject to the equipment's electrical and environmental operating requirements.
WAGO 746 Series PCB terminal blocks provide dependable electrical connectivity for industrial equipment manufacturers, control panel builders and automation engineers. Combining proven Push-in CAGE CLAMP® technology, high-current conductor compatibility and robust through-hole PCB mounting, the WAGO 746-2305 delivers secure and efficient electrical connections for industrial power distribution and control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.