Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.58
The WAGO 746-2302/000-016 is a high-performance 2-pole, 2-conductor PCB terminal block featuring a distinctive green/yellow housing for clear identification within industrial electrical equipment. As a special colour variant of the established WAGO 746 Series, it incorporates proven Push-in CAGE CLAMP® spring pressure connection technology, providing secure conductor termination and reliable electrical connectivity without conventional screw-clamping connections.
Designed for printed circuit board mounting, the WAGO 746-2302/000-016 combines straightforward installation with robust mechanical construction and dependable spring-clamp connections. Its two-conductor connection design enables convenient supply and distribution wiring, while individual operating slots allow conductors to be connected and disconnected using a suitable operating tool. Solid and appropriately ferruled conductors can be inserted directly into the Push-in CAGE CLAMP® connection, helping reduce installation time.
The WAGO 746-2302/000-016 shares the 7.5 mm pin spacing and 10 mm² nominal conductor capacity of the 746-2302 terminal block family. The standard series design provides a 50 A IEC rated current and 1000 V IEC rated voltage under specified insulation coordination conditions. Its distinctive green/yellow colour configuration makes it particularly useful where conductor identification and organised PCB wiring are important. Electrical ratings and approval conditions for the special colour variant should be checked against the applicable product documentation.
The WAGO 746-2302/000-016 incorporates Push-in CAGE CLAMP® spring pressure connection technology, developed to provide dependable conductor termination in industrial electrical systems. The spring mechanism maintains consistent contact pressure without relying on conventional conductor clamping screws, helping reduce maintenance requirements and supporting reliable electrical connections in equipment exposed to vibration and temperature variations.
The green/yellow housing configuration distinguishes this special variant from the standard grey WAGO 746-2302 terminal block. Green/yellow is commonly associated with protective conductor identification in electrical installations. Where the terminal is used in protective bonding or earthing arrangements, the complete assembly, PCB conductor paths and electrical connections must be designed and verified for the intended protective function; housing colour alone does not establish protective earth continuity or suitability.
The terminal block features a two-conductor connection arrangement with individual operating slots, allowing conductors to be terminated and released independently. Solid conductors and suitably ferruled fine-stranded conductors can be inserted directly into the terminal, while other compatible conductor types can be installed using an appropriate screwdriver or operating tool.
Its 45° angled conductor entry improves wiring accessibility inside electrical equipment, while the through-hole solder mounting arrangement provides a secure connection to printed circuit boards. The combination of robust electrical construction, clear colour identification and flexible conductor compatibility makes the WAGO 746-2302/000-016 suitable for industrial equipment manufacturers and PCB assembly designers.
| Manufacturer | WAGO |
|---|---|
| Series | 746 Series |
| Model | 746-2302/000-016 |
| Base model | 746-2302 |
| Product type | 2-conductor PCB terminal block |
| Product variant | Green/yellow colour version |
| Housing colour | Green/yellow |
| Connection technology | Push-in CAGE CLAMP® spring pressure connection |
| Number of poles | 2 |
| Number of levels | 2 |
| Connection arrangement | Two-conductor terminal design |
| Rated current (standard series, IEC) | 50 A |
| Rated voltage (standard series, IEC III / 2) | 1000 V |
| Rated impulse voltage (standard series) | 8 kV |
| Overvoltage category for standard IEC rating | III |
| Pollution degree for standard IEC rating | 2 |
| Pin spacing / pitch | 7.5 mm |
| Nominal conductor cross-section | 10 mm² |
| Solid conductor cross-section | 0.5–10 mm² |
| Stranded conductor cross-section | 0.5–10 mm² |
| Fine-stranded conductor without ferrule | 0.5–10 mm² |
| Fine-stranded conductor with ferrule | 0.5–6 mm² |
| Conductor size (AWG) | 20–8 AWG |
| Actuation type | Push-in connection / operating tool |
| Conductor entry angle | 45° / 135° downward-inclined |
| PCB connection type | Solder connection |
| Mounting type | Through-hole PCB mounting |
| Solder pin length (standard series) | 4.4 mm |
| Width (standard 2-pole design) | 17.7 mm |
| Height (standard series) | 36.9 mm |
| Depth (standard series) | 37 mm |
| Housing material (series) | Polyamide 66 (PA66) thermoplastic |
| Contact material (series) | Copper alloy |
| Contact surface (series) | Tin-plated |
| Clamping spring material (series) | Steel |
| Insulation flammability classification (series) | UL 94 V-0 |
| Operating temperature range (series) | −60 to +105 °C |
| Marking compatibility | WAGO miniature WSB and WMB markers |
| Special identification | Green/yellow housing configuration |
The WAGO 746-2302/000-016 is a green/yellow 2-pole PCB terminal block designed for secure conductor termination in industrial electrical equipment, automation systems and PCB assemblies requiring clear connection identification.
The standard WAGO 746-2302 is supplied with a grey housing, while the 746-2302/000-016 is a special green/yellow colour variant. Both belong to the WAGO 746 Series and use the same general Push-in CAGE CLAMP® connection platform. Application-specific electrical ratings and approvals should be checked for the exact variant.
The terminal block features a green/yellow housing, a colour combination commonly used to identify protective conductors. However, suitability for a protective earth connection depends on the complete electrical design, conductor path, PCB construction and applicable safety requirements. The housing colour does not independently confirm protective earth certification or continuity.
The standard WAGO 746-2302 series design has a 50 A IEC rated current and a 1000 V IEC rated voltage under overvoltage category III, pollution degree 2 conditions, together with an 8 kV rated impulse voltage. These are standard series specifications, and the applicable ratings for the /000-016 variant should be verified for the intended installation.
The WAGO 746 Series connection system supports solid and fine-stranded conductors without ferrules from 0.5–10 mm². Fine-stranded conductors fitted with ferrules can be connected in the range of 0.5–6 mm², subject to the manufacturer's conductor preparation requirements.
Push-in CAGE CLAMP® is WAGO's spring pressure connection system that allows solid and suitably ferruled conductors to be inserted directly into a terminal. The spring mechanism maintains consistent contact pressure, while a suitable operating tool enables the clamp to be opened for other conductor types or conductor removal.
The terminal block uses through-hole solder mounting onto printed circuit boards. Its solder pins establish the connection between the terminal assembly and the PCB, while the angled conductor entry provides convenient access during wiring and maintenance.
Yes. The WAGO 746-2302/000-016 is designed around the established 746 Series PCB terminal connection system and is suitable for consideration in industrial control equipment, power distribution assemblies and automation systems. Its green/yellow housing provides visual identification, while final application suitability depends on the electrical design and verified variant specifications.
WAGO 746 Series PCB terminal blocks provide dependable electrical connectivity for industrial equipment manufacturers, electrical engineers and automation specialists. Combining proven Push-in CAGE CLAMP® spring connection technology with a distinctive green/yellow identification housing, the WAGO 746-2302/000-016 offers a practical solution for secure, clearly identifiable PCB conductor connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.