Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.14
The WAGO 745-857/006-000 is a high-capacity 1-pole stackable PCB terminal block designed to provide secure and dependable electrical connections between conductors and printed circuit boards. Part of the established WAGO 745 Series, this modular wire-to-board connector incorporates proven CAGE CLAMP® spring pressure connection technology, delivering reliable conductor retention without conventional screw-terminal connections.
Engineered for industrial electronics, electrical distribution equipment and automation systems, the WAGO 745-857/006-000 accommodates solid and fine-stranded conductors from 0.2–16 mm². Its distinctive green-yellow PA66 polyamide housing supports colour-coded identification of protective conductor connections in appropriately designed electrical equipment. The modular stackable construction allows individual terminal blocks to be assembled into customised multi-pole PCB connection strips.
Featuring a 76 A IEC rated current, 10 mm PCB pin spacing and rated voltages of 320 V under IEC overvoltage category III, pollution degree 3 conditions and 630 V under category II, pollution degree 2 conditions, the WAGO 745-857/006-000 provides robust connection performance for demanding PCB applications. Its 45° conductor entry, four through-hole solder pins per electrical potential, integrated testing tap and commoning option make it a practical solution for industrial control electronics, power distribution assemblies and OEM electrical equipment manufacturing.
The WAGO 745-857/006-000 incorporates WAGO's established CAGE CLAMP® spring pressure connection technology to create secure electrical connections between conductors and printed circuit boards. A suitable operating tool opens the spring clamp, allowing the prepared conductor to be inserted into the connection point. Once the operating tool is removed, the spring mechanism maintains consistent contact pressure on the conductor.
Unlike conventional screw-type terminals, the connection does not depend on periodic screw retightening. This helps support dependable electrical contact in industrial environments where mechanical vibration, temperature variation and long-term operation place demands on conductor connections.
The terminal accommodates solid and fine-stranded conductors from 0.2–16 mm², providing considerably greater conductor capacity than smaller WAGO 745 Series variants. Fine-stranded conductors fitted with suitable insulated or uninsulated ferrules are supported from 0.25–10 mm². The specified conductor strip length is 12–13 mm.
Its 45° conductor entry angle provides convenient access for conductor insertion, removal and maintenance. This configuration is particularly useful where circuit boards are installed inside control enclosures, industrial power equipment or machinery with restricted wiring access.
A distinguishing characteristic of the WAGO 745-857/006-000 is its green-yellow insulating housing. Green-yellow colouring is conventionally reserved for protective conductors in electrical installations, helping engineers and maintenance personnel distinguish these connections from live and neutral circuits.
This colour-coded design is particularly relevant to protective conductor connections, equipment bonding arrangements and industrial PCB assemblies where clearly identifiable wiring positions are required. It can also support consistent terminal identification across electrical equipment manufactured using compatible WAGO 745 Series components.
The green-yellow housing does not independently establish a protective earth connection. Any protective conductor function must be provided by the complete electrical assembly, including its conductive path, PCB design, wiring, mechanical integrity and applicable safety requirements.
Where the terminal is used as part of a protective bonding or earthing arrangement, engineers must confirm that the complete connection satisfies the relevant protective conductor requirements, including electrical continuity, fault-current withstand capability and the applicable equipment standard.
The 76 A IEC rated current makes the WAGO 745-857/006-000 suitable for consideration in higher-current PCB connection applications where the complete conductor and circuit board system is appropriately designed.
Under the specified IEC/EN 60664-1 insulation conditions, the terminal has a rated voltage of 320 V under overvoltage category III, pollution degree 3, 320 V under category III, pollution degree 2 and 630 V under category II, pollution degree 2. Its rated impulse voltage is 4 kV.
The separate UL 1059 Use Group B and D ratings are 300 V at 10 A. These values must not be confused with the IEC current rating because the applicable rating depends on the relevant electrical standard and the certification requirements of the equipment.
For a completed PCB assembly, permissible operating current also depends on conductor size, PCB copper thickness, conductor track geometry, solder joint quality, ambient temperature and thermal management. A protective conductor application may additionally require assessment of prospective fault currents and disconnection times rather than relying on the normal continuous current rating alone.
The WAGO 745-857/006-000 incorporates four solder pins per electrical potential, providing a mechanically stable connection between the terminal block and the printed circuit board. This arrangement is particularly beneficial where larger conductors may exert additional mechanical forces during wiring, maintenance and normal equipment handling.
Each solder pin measures 1.2 × 1.6 mm and has a length of 6.5 mm. WAGO specifies a recommended drilled hole diameter of 2.2 mm with a positive tolerance of 0.1 mm. The terminal uses conventional through-hole technology (THT) solder mounting.
Its physical dimensions are 33.5 mm high, 11.5 mm wide and 33.4 mm deep, with a height above the PCB surface of 27 mm. These measurements should be considered when designing PCB footprints, enclosure clearances and accessible wiring arrangements.
The four-pin arrangement supports mechanical stability, but reliable installation still depends on a correctly designed PCB footprint, suitable copper conductor patterns, appropriate soldering processes and any required mechanical strain relief.
The stackable modular construction allows individual WAGO 745-857/006-000 terminal blocks to be combined into customised multi-pole connection strips. This provides flexibility for PCB designers and OEM manufacturers developing equipment with different conductor connection requirements.
An integrated jumper slot supports common electrical potential distribution between compatible terminal positions using suitable WAGO comb-style jumper bars. Manufacturer-listed accessories include the WAGO 745-582, 745-583, 745-584, 745-585 and 745-682 jumper bars.
When terminals are used for protective conductor identification, any commoning arrangement must preserve the required electrical continuity and fault-current performance of the complete system. Jumper compatibility alone does not confirm that a particular arrangement is suitable for use as a protective conductor connection.
The terminal also incorporates an integrated testing tap for electrical measurements and a Mini-WSB marker slot for terminal identification. Compatible accessories include the WAGO 745-500 snap-fit end plate, 745-540 and 745-545 end plates with flanges, and the WAGO 210-721 operating tool.
The green-yellow PA66 polyamide housing provides durable electrical insulation with a UL94 V-0 flammability classification. Tin-plated electrolytic copper contacts and chrome-nickel spring steel clamping components further support dependable electrical and mechanical performance within the manufacturer's specified temperature limit range of -60 to +105 °C.
Tick the specs you need, then view products that match.
| Current | 76 A | |
|---|---|---|
| Voltage | 320 V | |
| Number of Levels | 1 | |
| Product Series | WAGO 745 | |
| Rated surge voltage | 4 kV | |
| Angle PCB/conductor connection | 45°/135° (downwards inclined) | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 76 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 16 mm² | |
| Number of electrical connections | 1 | |
| Material insulation body | Thermoplastic | |
| Number of levels | 1 | |
| Connectable conductor cross section multi-wired | 0.2 – 16 mm² | |
| Housing colour | Green | |
| Type of fastening | Solder | |
| Connection type PCB | Soldering connection | |
| Length pin | 6.5 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 10 mm² | |
| Height | 27 mm | |
| Modular spacing connections | 10 mm | |
| Material connection surface | Tin | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Connectable conductor cross section solid-core | 0.2 – 16 mm² | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Connection type conductor | Spring clamp connection | |
| Manufacturer | WAGO | |
| Manufacturer part number | 745-857/006-000 | |
| Product series | 745 | |
| Product type | Stackable PCB terminal block | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation type | Operating tool | |
| Number of poles | 1 | |
| Number of conductor connection points | 1 | |
| Number of electrical potentials | 1 | |
| Number of connection types | 1 | |
| Number of jumper slots | 1 | |
| Conductor entry angle | 45° relative to PCB | |
| Rated current (IEC) | 76 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Solid conductor cross-section | 0.2–16 mm² | |
| Fine-stranded conductor cross-section | 0.2–16 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–10 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–10 mm² | |
| AWG conductor range | 24–6 AWG | |
| Conductor strip length | 12–13 mm | |
| PCB pin spacing | 10 mm | |
| PCB connection type | Through-hole technology (THT) | |
| PCB mounting method | Solder mounting | |
| Number of solder pins per potential | 4 | |
| Solder pin arrangement | In-line across the terminal strip | |
| Solder pin length | 6.5 mm | |
| Solder pin dimensions | 1.2 × 1.6 mm | |
| Recommended PCB drilled hole diameter | 2.2 mm (+0.1 mm tolerance) | |
| Insulating material | Polyamide 66 (PA66) | |
| Insulation material group | I | |
| Flammability classification | UL94 V-0 | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Electrolytic copper (ECu) | |
| Contact plating | Tin-plated | |
| Temperature limit range | -60 to +105 °C | |
| Width | 11.5 mm | |
| Depth | 33.4 mm | |
| Height above PCB surface | 27 mm | |
| Weight | 8.98 g | |
| Fire load | 0.127 MJ | |
| GTIN / EAN | 4044918303163 | |
| Country of origin | Poland | |
| Customs tariff number | 85369010000 | |
| Manufacturer product group | 4 (Printed Circuit) | |
| Compatible jumper bars | WAGO 745-582, 745-583, 745-584, 745-585 and 745-682 | |
| Compatible operating tool | WAGO 210-721 | |
| Compatible end plates | WAGO 745-500, 745-540 and 745-545 | |
| Standard packaging unit | 100 pieces |
The WAGO 745-857/006-000 is a 1-pole stackable PCB terminal block designed to connect electrical conductors securely to printed circuit boards in industrial control equipment, power electronics and automation systems. Its green-yellow housing also supports identification of protective conductor connections in appropriately designed electrical equipment.
The WAGO 745-857/006-000 has an IEC rated current of 76 A. Under UL 1059 Use Groups B and D, the rated current is 10 A. The applicable rating depends on the relevant standard, conductor size and complete electrical assembly.
The terminal is rated at 320 V under IEC overvoltage category III, pollution degree 3 conditions, 320 V under category III, pollution degree 2 conditions and 630 V under category II, pollution degree 2 conditions. Its rated impulse voltage is 4 kV.
The WAGO 745-857/006-000 accepts solid and fine-stranded conductors from 0.2–16 mm², corresponding to 24–6 AWG. Fine-stranded conductors fitted with suitable insulated or uninsulated ferrules are supported from 0.25–10 mm².
The green-yellow housing supports colour-coded identification of protective conductor connections in electrical equipment. Green-yellow is conventionally reserved for protective conductors, helping distinguish these connections from live and neutral circuits. The complete electrical assembly must establish any protective earth function.
The WAGO 745-857/006-000 can be considered for appropriately designed protective conductor arrangements, but the green-yellow housing alone does not establish a protective earth function. The complete PCB assembly must meet the relevant requirements for protective conductor continuity, mechanical integrity and fault-current withstand capability.
Yes. The WAGO 745-857/006-000 uses CAGE CLAMP® spring pressure connection technology, which provides secure conductor retention without conventional screw tightening. An appropriate operating tool is used to open the spring clamp during conductor insertion or removal.
The WAGO 745-857/006-000 has a 10 mm PCB pin spacing. This supports modular PCB connection strips requiring this spacing and conductor capacity up to 16 mm².
The terminal features four through-hole solder pins per electrical potential. Each solder pin measures 1.2 × 1.6 mm and has a length of 6.5 mm, providing mechanical stability for the PCB connection.
The terminal uses through-hole solder mounting with four solder pins per potential. The recommended PCB drilled hole diameter is 2.2 mm with a positive tolerance of 0.1 mm. The PCB layout should follow WAGO's specified footprint.
Yes. The modular stackable construction allows compatible WAGO 745 Series terminal blocks to form customised multi-pole connection strips. An integrated jumper slot also supports common potential distribution using suitable WAGO comb-style jumper accessories.
Manufacturer-listed compatible jumper accessories include the WAGO 745-582, 745-583, 745-584, 745-585 and 745-682 comb-style jumper bars. Jumper selection must account for the required electrical arrangement, current rating and any applicable protective conductor requirements.
The specified conductor strip length is 12–13 mm. Conductors should be prepared and connected using the appropriate operating tool in accordance with WAGO's installation instructions.
The WAGO 745-857/006-000 has a specified temperature limit range of -60 to +105 °C. This is a material temperature limit range and does not guarantee operation at the full rated current throughout that entire range.
The terminal features a green-yellow PA66 polyamide insulating housing with UL94 V-0 flammability classification, chrome-nickel spring steel clamping components and tin-plated electrolytic copper contacts.
The WAGO 745-851/006-000 and WAGO 745-857/006-000 are both 1-pole stackable PCB terminal blocks featuring CAGE CLAMP® technology, 10 mm pin spacing, 16 mm² conductor capacity, a 76 A IEC rated current and four solder pins per electrical potential. The principal difference is housing colour: the 745-851/006-000 is grey, while the 745-857/006-000 is green-yellow for protective conductor identification.
Related WAGO 745 Series variants include 745-851/006-000 in grey, 745-853/006-000 in light grey, 745-854/006-000 in blue, 745-857/006-000 in green-yellow and 745-858/006-000 in light green. These variants provide colour-coded options for compatible PCB terminal assemblies.
WAGO PCB terminal blocks are established connection components for industrial electrical equipment, automation systems and power electronics where secure conductor retention and dependable PCB integration are essential. The WAGO 745-857/006-000 combines proven CAGE CLAMP® spring pressure technology, 16 mm² conductor capacity, a 76 A IEC current rating, 10 mm pin spacing and four through-hole solder pins per electrical potential, providing a robust modular connection solution with green-yellow identification for appropriately designed electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.