Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.49
The WAGO 745-602/006-000 is a robust and reliable 2-pole PCB terminal block designed to provide secure electrical connections between external conductors and printed circuit boards in industrial automation, electrical control and power distribution equipment. As part of the WAGO 745 series, this terminal strip incorporates the manufacturer's proven CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw-clamping connections.
Designed for demanding industrial electrical applications, the WAGO 745-602/006-000 combines a durable grey polyamide 66 (PA66) insulating housing with tin-plated electrolytic copper contacts and chrome-nickel spring steel clamping elements. Its screwdriver-actuated CAGE CLAMP® mechanism maintains consistent contact pressure, helping provide reliable conductor retention and electrical connectivity. The two-pole configuration allows two independent electrical potentials to be connected to a printed circuit board, with an integrated jumper slot providing additional commoning flexibility.
Featuring a 76 A IEC rated current, a 1000 V rated voltage under IEC overvoltage category III, pollution degree 2 conditions and 15 mm pin spacing, the WAGO 745-602/006-000 accommodates suitable conductors from 0.2–16 mm². Its 45° angled conductor entry, through-hole PCB mounting and compact two-position construction make it particularly suitable for industrial power electronics, electrical control assemblies and OEM equipment requiring dependable high-current electrical connections.
The WAGO 745-602/006-000 uses the manufacturer's established CAGE CLAMP® spring pressure connection technology to provide dependable electrical contact between external wiring and PCB-mounted terminals. Unlike conventional screw-clamping terminal blocks, the spring pressure connection maintains conductor contact force through an integrated spring mechanism, helping minimise maintenance requirements and provide reliable electrical connections during normal industrial operation.
The terminal strip incorporates two independent connection points, allowing two separate electrical potentials to be terminated within a single PCB-mounted component. Its 45° conductor entry angle improves accessibility during installation, while the 15 mm pitch provides increased spacing between adjacent electrical connections. The CAGE CLAMP® system accommodates suitable solid and fine-stranded conductors up to 16 mm², making it suitable for industrial electrical equipment requiring high-current conductor termination.
For PCB integration, the WAGO 745-602/006-000 uses through-hole solder mounting with four solder pins per potential. The solder pins measure 1.2 × 1.6 mm and have a length of 6.5 mm, providing a mechanically stable and electrically conductive connection to the printed circuit board. The terminal strip also features an integrated jumper slot, allowing compatible WAGO comb-style jumper bars to connect adjacent electrical potentials when commoning or potential distribution is required.
The terminal block additionally includes an integrated testing tap for electrical measurement and a marker slot for compatible WAGO Mini-WSB identification markers. These features support commissioning, maintenance and clear identification of electrical circuits within industrial equipment.
The grey PA66 insulating housing offers electrical insulation and mechanical durability, with a UL94 V0 flammability classification. The terminal block has a specified temperature limit range of -60 to +105 °C. Its 76 A IEC rated current and voltage ratings must be considered alongside conductor size, PCB copper capacity, solder joint design, temperature conditions and the requirements of the complete electrical assembly. UL and CSA current ratings differ from IEC ratings and must be applied according to the relevant approval conditions.
Tick the specs you need, then view products that match.
| Current | 76 A | |
|---|---|---|
| Voltage | 1000 V | |
| Number of Levels | 1 | |
| Product Series | WAGO 745 | |
| Rated surge voltage | 8 kV | |
| Angle PCB/conductor connection | 45°/135° (downwards inclined) | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 76 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 16 mm² | |
| Number of electrical connections | 2 | |
| Material insulation body | Thermoplastic | |
| Number of levels | 1 | |
| Connectable conductor cross section multi-wired | 0.2 – 16 mm² | |
| Housing colour | Grey | |
| Type of fastening | Solder | |
| Connection type PCB | Soldering connection | |
| Length pin | 6.5 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 10 mm² | |
| Height | 27 mm | |
| Modular spacing connections | 15 mm | |
| Material connection surface | Tin | |
| Type of banding | None | |
| Rated voltage | 1000 V | |
| Connectable conductor cross section solid-core | 0.2 – 16 mm² | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Connection type conductor | Spring clamp connection | |
| Manufacturer | WAGO | |
| Series | 745 | |
| Model | 745-602/006-000 | |
| Product type | PCB terminal block | |
| Product configuration | Terminal strip with jumper slot | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation type | Operating tool / screwdriver | |
| Number of poles | 2 | |
| Total connection points | 2 | |
| Total potentials | 2 | |
| Number of connection types | 1 | |
| Number of jumper slots | 1 | |
| Rated current (IEC) | 76 A | |
| Rated voltage (III / 3) | 630 V | |
| Rated impulse voltage (III / 3) | 8 kV | |
| Rated voltage (III / 2) | 1000 V | |
| Rated impulse voltage (III / 2) | 8 kV | |
| Rated voltage (II / 2) | 1000 V | |
| Rated impulse voltage (II / 2) | 8 kV | |
| UL rated voltage (Use Group B) | 300 V | |
| UL rated current (Use Group B) | 65 A | |
| UL rated voltage (Use Group C) | 300 V | |
| UL rated current (Use Group C) | 65 A | |
| UL rated voltage (Use Group D) | 600 V | |
| UL rated current (Use Group D) | 5 A | |
| CSA rated voltage (Use Groups B and C) | 300 V | |
| CSA rated current (Use Groups B and C) | 65 A | |
| CSA rated voltage (Use Group D) | 600 V | |
| CSA rated current (Use Group D) | 5 A | |
| Pin spacing | 15 mm | |
| Solid conductor cross-section | 0.2–16 mm² | |
| Fine-stranded conductor cross-section | 0.2–16 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–10 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–10 mm² | |
| Conductor size | 24–6 AWG | |
| Conductor stripping length | 12–13 mm | |
| Conductor entry angle | 45° relative to the PCB | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB connection | Solder termination | |
| Number of solder pins per potential | 4 | |
| Total number of solder pins | 8 | |
| Solder pin length | 6.5 mm | |
| Solder pin dimensions | 1.2 × 1.6 mm | |
| PCB drilled hole diameter | 2.2 mm (+0.1 mm tolerance) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Housing material | Polyamide 66 (PA66) | |
| Material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Flammability classification | UL94 V0 | |
| Temperature limit range | -60 to +105 °C | |
| Width | 26.7 mm | |
| Height above PCB surface | 27 mm | |
| Depth | 33.4 mm | |
| Dimensions (H × W × D) | 33.5 × 26.7 × 33.4 mm | |
| Weight | 20.93 g | |
| Mounting type | PCB through-hole solder mounting | |
| Mounting flange | Without mounting flange | |
| Commoning capability | Integrated jumper slot | |
| Testing facility | Integrated testing tap | |
| Marking facility | Marker slot for WAGO Mini-WSB markers | |
| Fire load | 0.344 MJ | |
| Manufacturer packaging unit | 36 pieces | |
| Product group | 4 (Printed Circuit) | |
| Product category | PCB terminal blocks | |
| Applicable standards | IEC/EN 60664-1, UL 1059 | |
| RoHS compliance | Compliant | |
| Country of origin | Poland | |
| GTIN | 4044918302951 |
The WAGO 745-602/006-000 is a 2-pole PCB terminal block designed to connect external electrical conductors to printed circuit boards in industrial automation, power distribution, control systems and electrical equipment. It incorporates CAGE CLAMP® spring pressure connection technology for secure conductor termination.
The WAGO 745-602/006-000 has an IEC rated current of 76 A and a 1000 V rated voltage under overvoltage category III, pollution degree 2 conditions. Under category III, pollution degree 3 conditions, its rated voltage is 630 V. Separate UL ratings include 300 V and 65 A for Use Groups B and C, and 600 V and 5 A for Use Group D.
The terminal block supports suitable solid and fine-stranded conductors from 0.2–16 mm², corresponding to 24–6 AWG. Fine-stranded conductors fitted with insulated or uninsulated ferrules are supported within the 0.25–10 mm² range. The specified conductor stripping length is 12–13 mm.
The CAGE CLAMP® connection uses a spring pressure mechanism to hold the conductor securely against the electrical contact. A suitable operating tool opens the clamp for conductor insertion or removal, while the spring maintains reliable contact pressure after the connection has been completed. This eliminates conventional screw-terminal tightening and supports dependable electrical connections.
Both products are 2-pole PCB terminal blocks from the WAGO 745 series with CAGE CLAMP® connections and a 76 A IEC rated current. The WAGO 745-602/006-000 features 15 mm pin spacing and is rated at 1000 V under IEC category III, pollution degree 2 conditions, whereas the WAGO 745-502/006-000 features 10 mm pin spacing. The correct model should be selected according to PCB layout, insulation coordination and the manufacturer's electrical ratings.
WAGO PCB terminal blocks are widely used by electrical engineers, industrial automation specialists and OEM equipment manufacturers for dependable conductor connections in modern industrial equipment. The WAGO 745-602/006-000 2-pole PCB terminal block combines proven CAGE CLAMP® spring pressure technology, high-current IEC connection capability, 15 mm terminal spacing and robust through-hole PCB mounting to support reliable electrical integration in industrial power, control and automation applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.