Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.96
The WAGO 745-3253 is a robust 3-pole printed circuit board (PCB) terminal block designed to provide secure and reliable electrical connections in industrial automation, control systems and electronic equipment. As part of the established WAGO 745 Series, this terminal block incorporates proven CAGE CLAMP® spring pressure connection technology, enabling dependable conductor termination without conventional screw connections.
Designed for efficient PCB integration, the WAGO 745-3253 features a 12.5 mm pin spacing, three independent electrical connection points and a 45° conductor entry angle. Its spring clamp mechanism maintains consistent contact pressure, helping ensure reliable electrical continuity in industrial environments where vibration, temperature fluctuations and continuous operation can affect conventional terminals. The screwless connection system also simplifies wiring, installation and maintenance.
With an IEC rated current of 32 A, a 1000 V IEC rated voltage under overvoltage category III and pollution degree 3, and compatibility with 0.08–4 mm² conductors, the WAGO 745-3253 is suitable for industrial electronics, PCB-based power distribution and electrical control applications. Its durable grey polyamide housing, through-hole solder mounting and dual solder pins per pole provide a practical and mechanically stable solution for dependable wire-to-board connections.
The WAGO 745-3253 incorporates CAGE CLAMP® spring pressure connection technology to establish secure electrical contact between connected conductors and printed circuit boards. Unlike conventional screw-type terminal blocks, the spring clamp mechanism applies continuous contact pressure without requiring periodic screw retightening. This helps maintain dependable electrical continuity in industrial applications where mechanical vibration, thermal cycling and long-term operational reliability are important.
Conductors are connected using a suitable operating tool to open the spring clamp. Once the correctly stripped conductor is inserted and the tool is removed, the spring mechanism securely retains the wire. The terminal supports solid and fine-stranded copper conductors within its specified cross-section range, including fine-stranded conductors fitted with suitable insulated or uninsulated ferrules. This flexibility makes the terminal block suitable for a wide range of industrial wiring configurations.
The 45° conductor entry angle provides convenient access to wiring connections, particularly in industrial PCB assemblies where accessibility is important. Combined with its 12.5 mm pitch, three independent terminal positions and two solder pins per pole, the WAGO 745-3253 provides a mechanically stable connection solution. Its integrated test tap supports electrical inspection, commissioning and troubleshooting, while the through-hole construction ensures secure attachment to printed circuit boards.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 1000 V | |
| Number of Levels | 1 | |
| Product Series | WAGO 745 | |
| Rated surge voltage | 8 kV | |
| Angle PCB/conductor connection | 45°/135° (downwards inclined) | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of electrical connections | 3 | |
| Material insulation body | Thermoplastic | |
| Number of levels | 1 | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Housing colour | Grey | |
| Type of fastening | Solder | |
| Connection type PCB | Soldering connection | |
| Length pin | 4 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 19 mm | |
| Modular spacing connections | 12.5 mm | |
| Material connection surface | Tin | |
| Type of banding | None | |
| Rated voltage | 1000 V | |
| Connectable conductor cross section solid-core | 0.08 – 4 mm² | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Connection type conductor | Spring clamp connection | |
| Manufacturer | WAGO | |
| Series | 745 Series | |
| Model | 745-3253 | |
| Product type | PCB terminal block / fixed wire-to-board connector | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation type | Operating tool / screwdriver | |
| Number of poles | 3 | |
| Number of connection points | 3 | |
| Number of potentials | 3 | |
| Number of connection types | 1 | |
| Pin spacing / pitch | 12.5 mm | |
| Rated current (IEC) | 32 A | |
| Rated voltage (IEC, III/3) | 1000 V | |
| Rated voltage (IEC, III/2) | 1000 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage | 8 kV | |
| UL rated voltage (Use Group B) | 600 V | |
| UL rated current (Use Group B) | 20 A | |
| UL rated voltage (Use Group C) | 600 V | |
| UL rated current (Use Group C) | 20 A | |
| CSA rated voltage (Use Group B) | 600 V | |
| CSA rated current (Use Group B) | 20 A | |
| CSA rated voltage (Use Group C) | 600 V | |
| CSA rated current (Use Group C) | 20 A | |
| Solid conductor cross-section | 0.08–4 mm² | |
| Fine-stranded conductor cross-section | 0.08–4 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–2.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry angle | 45° to PCB | |
| Mounting type | Through-hole PCB solder mounting | |
| PCB contact technology | THT | |
| Number of solder pins per pole | 2 | |
| Total solder pins | 6 | |
| Solder pin arrangement | In-line across the terminal strip | |
| Solder pin dimensions | 0.8 × 1.2 mm | |
| Solder pin length | 4 mm | |
| Recommended PCB drilled hole diameter | 1.5 mm (+0.1 mm tolerance) | |
| Housing material | Polyamide 66 (PA66) | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Temperature limit range | -60 to +105 °C | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Width | 31.5 mm | |
| Height above PCB surface | 19 mm | |
| Depth | 19.4 mm | |
| Weight | 8.526 g | |
| Fire load | 0.172 MJ | |
| UL recognition | UL 1059, file E45172 | |
| Country of origin | Poland | |
| GTIN / EAN | 4045454001087 | |
| Standard packaging unit | 96 pieces |
The WAGO 745-3253 is a 3-pole PCB terminal block designed to connect electrical conductors securely to printed circuit boards in industrial automation, electronic control equipment, power supply assemblies and electrical distribution applications.
The terminal block features three independent electrical connection points arranged in a single row with a 12.5 mm pitch, allowing three separate conductors to be connected to a printed circuit board.
The WAGO 745-3253 has an IEC rated current of 32 A. Under UL 1059 and CSA ratings, the rated current is 20 A for Use Groups B and C. The applicable operating current depends on the relevant approval, conductor size, PCB design and installation conditions.
The WAGO 745-3253 accepts 0.08–4 mm² solid and fine-stranded conductors, equivalent to 28–12 AWG. Fine-stranded conductors fitted with suitable insulated or uninsulated ferrules are supported within the 0.25–2.5 mm² range.
CAGE CLAMP® is WAGO's spring pressure connection technology, designed to maintain secure conductor retention and reliable electrical contact without conventional terminal screws. The WAGO 745-3253 uses a suitable operating tool to open the clamp for conductor insertion and removal.
The terminal block has an IEC rated voltage of 1000 V under overvoltage category III and pollution degree 3, category III and pollution degree 2, and category II and pollution degree 2. Its rated impulse voltage is 8 kV. The applicable operating voltage must comply with the relevant electrical standards and installation conditions.
The terminal block is designed for through-hole solder mounting directly onto a printed circuit board. It incorporates two solder pins per pole, providing a total of six solder pins for secure mechanical attachment and reliable electrical contact with the PCB.
The WAGO 745-3253 measures 31.5 mm wide, 23 mm high and 19.4 mm deep, with a height of 19 mm above the PCB surface and a solder pin length of 4 mm. It weighs approximately 8.526 g and is designed for integration into industrial electronic equipment and control assemblies.
WAGO specifies a conductor stripping length of 8–9 mm for the 745-3253. Correct stripping and insertion using a suitable operating tool help ensure reliable conductor retention within the CAGE CLAMP® connection.
No. The WAGO 745-3253 uses screwless CAGE CLAMP® spring pressure connections, eliminating the need for conventional terminal screw tightening. A suitable operating tool is used to open the spring clamp when inserting or removing conductors.
WAGO 745 Series PCB terminal blocks combine proven CAGE CLAMP® spring pressure technology, robust through-hole mounting and flexible conductor compatibility. The WAGO 745-3253 provides a dependable three-pole connection solution for automation engineers, electronics manufacturers and OEM machine builders requiring secure, efficient and long-lasting wire-to-board connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.