Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.50
The WAGO 745-305 is a robust and reliable 5-pole PCB terminal block featuring CAGE CLAMP® spring pressure connection technology, designed to provide secure electrical connections in industrial control equipment, power distribution circuits and electronic assemblies. As part of the established WAGO 745 Series, this terminal block offers dependable wire-to-board connectivity for machine builders, electrical engineers and OEM manufacturers requiring efficient and maintenance-friendly electrical connections.
Featuring WAGO's proven CAGE CLAMP® connection system, the 745-305 provides secure conductor retention without conventional screw tightening. Its spring pressure technology maintains consistent electrical contact force, helping deliver dependable connections in industrial environments subject to vibration and temperature variations. The integrated jumper slot enables electrical potentials to be commoned using compatible WAGO comb-style jumper bars, while the integrated testing tap and marker slot simplify commissioning, maintenance and circuit identification.
With a rated current of 41 A, conductor capacity up to 6 mm² and a 7.5 mm pin spacing, the WAGO 745-305 is suitable for industrial power and control connections. Its 5-pole configuration, grey insulating housing and through-hole PCB mounting design provide a compact and dependable solution for industrial automation equipment, electronic control systems and electrical assemblies requiring reliable multi-pole connectivity.
The WAGO 745-305 uses WAGO's established CAGE CLAMP® spring pressure connection technology to provide dependable electrical connections between conductors and printed circuit boards. Unlike conventional screw-clamp terminals, CAGE CLAMP® technology applies spring force directly to the conductor, maintaining consistent contact pressure without routine screw retightening. This connection principle helps ensure reliable performance in industrial environments where electrical equipment may experience vibration, mechanical stress and temperature variations.
The 5-pole terminal block incorporates two solder pins per electrical potential for stable mechanical attachment to the printed circuit board. Its integrated jumper slot enables compatible WAGO comb-style jumper bars, including suitable 745 Series jumper accessories, to common selected electrical potentials. The integrated testing tap and Mini-WSB marker slot support efficient commissioning, electrical measurements and conductor identification. With its 41 A IEC current rating, 7.5 mm pitch and robust grey insulating housing, the WAGO 745-305 provides a practical solution for industrial PCB assemblies requiring dependable multi-pole wire-to-board connections.
Tick the specs you need, then view products that match.
| Current | 41 A | |
|---|---|---|
| Voltage | 630 V | |
| Number of Levels | 1 | |
| Product Series | WAGO 745 | |
| Rated surge voltage | 6 kV | |
| Angle PCB/conductor connection | 45°/135° (downwards inclined) | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 41 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 6 mm² | |
| Number of electrical connections | 5 | |
| Material insulation body | Thermoplastic | |
| Number of levels | 1 | |
| Connectable conductor cross section multi-wired | 0.2 – 6 mm² | |
| Housing colour | Grey | |
| Type of fastening | Solder | |
| Connection type PCB | Soldering connection | |
| Length pin | 4.5 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 4 mm² | |
| Height | 23 mm | |
| Modular spacing connections | 7.5 mm | |
| Material connection surface | Tin | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Connectable conductor cross section solid-core | 0.2 – 6 mm² | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Connection type conductor | Spring clamp connection | |
| Manufacturer | WAGO | |
| Series | 745 Series | |
| Model | 745-305 | |
| Product type | PCB terminal block / terminal strip | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation type | Operating tool / screwdriver | |
| Number of poles | 5 | |
| Number of connection points | 5 | |
| Number of electrical potentials | 5 | |
| Number of connection types | 1 | |
| Rated current (IEC) | 41 A | |
| Rated voltage (IEC, overvoltage category III, pollution degree 3) | 500 V | |
| Rated voltage (IEC, overvoltage category III, pollution degree 2) | 630 V | |
| Rated voltage (IEC, overvoltage category II, pollution degree 2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated current (UL, use groups B and C) | 30 A | |
| Rated current (UL, use group D) | 10 A | |
| Rated voltage (UL, use group B) | 300 V | |
| Rated voltage (UL, use group C) | 150 V | |
| Rated voltage (UL, use group D) | 300 V | |
| Solid conductor cross-section | 0.2–6 mm² | |
| Fine-stranded conductor cross-section | 0.2–6 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–4 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–4 mm² | |
| Conductor size (AWG) | 24–10 AWG | |
| Wire stripping length | 11–12 mm | |
| Pin spacing | 7.5 mm | |
| Conductor entry angle | 45° to PCB | |
| PCB connection | Through-hole technology (THT), solder connection | |
| Solder pins per potential | 2 | |
| Total number of solder pins | 10 | |
| Solder pin length | 4.5 mm | |
| Solder pin dimensions | 1 × 1.4 mm | |
| PCB drilled hole diameter | 1.8 mm, with a tolerance of +0.1 mm | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of jumper slots | 1 | |
| Testing facility | Integrated testing tap | |
| Marking facility | Mini-WSB marker slot | |
| Mounting configuration | PCB mounting without fixing flange | |
| Colour | Grey | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Insulating material group | I | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | -60 to +105 °C | |
| Dimensions (W × H × D) | 39.1 × 27.5 × 29.1 mm | |
| Height above PCB surface | 23 mm | |
| Weight | Approx. 24.5 g | |
| RoHS compliance | Compliant, no exemptions | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918302180 |
The WAGO 745-305 is a 5-pole PCB terminal block designed to connect electrical conductors directly to printed circuit boards. It is commonly used in industrial control equipment, power supplies, automation systems and electronic assemblies requiring reliable wire-to-board electrical connections.
The WAGO 745-305 has an IEC rated current of 41 A under applicable rating conditions. Its UL current ratings are 30 A for use groups B and C and 10 A for use group D. The permitted operating current depends on the applicable approval, conductor selection, PCB design and installation conditions.
The WAGO 745-305 supports solid and fine-stranded conductors from 0.2–6 mm², corresponding to a conductor range of 24–10 AWG. Fine-stranded conductors fitted with suitable insulated or uninsulated ferrules can be connected in the 0.25–4 mm² range. The recommended wire stripping length is 11–12 mm.
The WAGO 745-305 uses CAGE CLAMP® spring pressure connection technology. Conductors are secured by spring force rather than conventional screw clamping, with a suitable operating tool used for conductor insertion and removal. This design supports dependable electrical connections without routine screw retightening.
Yes. The WAGO 745-305 includes an integrated jumper slot for compatible WAGO comb-style jumper bars. Suitable accessories include the WAGO 745-385 5-way jumper, which enables electrical potentials to be commoned within compatible terminal arrangements. Jumper selection and electrical loading must comply with the relevant accessory ratings.
WAGO 745 Series PCB terminal blocks provide dependable wire-to-board electrical connections for industrial automation, electronic equipment and OEM manufacturing. The WAGO 745-305 combines proven CAGE CLAMP® spring pressure technology, a compact 5-pole configuration, a 7.5 mm pitch and a 41 A IEC current rating to support secure, efficient and reliable electrical connections in modern industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.