Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.64
The WAGO 745-303/000-016/999-950 is a high-quality 3-pole PCB terminal block suitable for Ex e applications, featuring WAGO's proven CAGE CLAMP® spring pressure connection technology. Designed for reliable electrical connections in industrial control equipment and electronic assemblies, this terminal block combines secure conductor termination with a robust construction suitable for demanding industrial environments. As part of the established WAGO 745 Series, it provides a dependable wire-to-board connection solution for machine builders, electrical engineers and OEM manufacturers.
Unlike the standard WAGO 745-303 terminal block, the 745-303/000-016/999-950 variant is specifically designed for use in Ex e increased safety applications, subject to the applicable certification and installation requirements. Its CAGE CLAMP® connection system provides consistent spring pressure without conventional screw tightening, while the integrated jumper slot allows electrical potentials to be commoned using compatible WAGO accessories. The terminal block also features double solder pins per potential, providing mechanical stability when installed on a printed circuit board.
With a rated current of 37 A for Ex e II applications, a rated voltage of 275 V under the applicable Ex e rating conditions, and a 7.5 mm pin spacing, the WAGO 745-303/000-016/999-950 provides reliable electrical connectivity in appropriately designed industrial equipment. Its green-yellow insulating housing, 3-pole configuration and support for solid conductors up to 6 mm² make it a practical solution for specialised PCB connection systems requiring secure conductor termination and clear component identification.
The WAGO 745-303/000-016/999-950 combines WAGO's established CAGE CLAMP® spring pressure technology with a design suitable for Ex e increased safety electrical applications. Ex e protection is intended to reduce the likelihood of electrical equipment becoming an ignition source in potentially explosive atmospheres through appropriate construction and installation measures. The terminal block's spring pressure connection system maintains conductor contact force without routine screw retightening, supporting dependable electrical performance in industrial installations.
The terminal block incorporates two solder pins per electrical potential for stable PCB attachment, together with an integrated jumper slot for compatible WAGO comb-style jumper bars. Its 37 A Ex e II current rating is reduced to 31 A when used with a suitable jumper, reflecting the specific operating conditions associated with commoned connections. The green-yellow housing supports identification in electrical assemblies; however, a protective earth connection must be established and verified through the electrical design rather than housing colour alone. For hazardous-area installations, the complete equipment design must comply with the applicable Ex certification, installation conditions and electrical protection requirements.
Tick the specs you need, then view products that match.
| Current | 37 A | |
|---|---|---|
| Voltage | 275 V | |
| Number of Levels | 1 | |
| Product Series | WAGO 745 | |
| Rated surge voltage | 6 kV | |
| Angle PCB/conductor connection | 45°/135° (downwards inclined) | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 37 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 4 mm² | |
| Number of electrical connections | 3 | |
| Material insulation body | Thermoplastic | |
| Number of levels | 1 | |
| Connectable conductor cross section multi-wired | 0.08 – 4 mm² | |
| Housing colour | Other | |
| Type of fastening | Solder | |
| Connection type PCB | Soldering connection | |
| Length pin | 4.5 mm | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 2.5 mm² | |
| Height | 23 mm | |
| Modular spacing connections | 7.5 mm | |
| Material connection surface | Tin | |
| Type of banding | None | |
| Rated voltage | 275 V | |
| Connectable conductor cross section solid-core | 0.2 – 6 mm² | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Connection type conductor | Spring clamp connection | |
| Manufacturer | WAGO | |
| Series | 745 Series | |
| Model | 745-303/000-016/999-950 | |
| Product type | PCB terminal block / terminal strip | |
| Base model | 745-303 | |
| Colour variant | /000-016 | |
| Special variant | /999-950, suitable for Ex e applications | |
| Colour | Green-yellow | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation type | Operating tool / screwdriver | |
| Number of poles | 3 | |
| Total number of connection points | 3 | |
| Total number of electrical potentials | 3 | |
| Number of connection types | 1 | |
| Application classification | Suitable for Ex e increased safety applications | |
| Rated voltage (Ex e II) | 275 V | |
| Rated current (Ex e II) | 37 A | |
| Rated current with jumper (Ex e II) | 31 A | |
| Solid conductor cross-section | 0.2–6 mm² | |
| Solid conductor size | 24–10 AWG | |
| Fine-stranded conductor cross-section | 0.2–4 mm² | |
| Fine-stranded conductor size | 24–12 AWG | |
| Fine-stranded conductor with ferrule and plastic collar | 0.25–4 mm² | |
| Fine-stranded conductor with ferrule without plastic collar | 0.25–2.5 mm² | |
| Wire stripping length | 8–9 mm | |
| Pin spacing | 7.5 mm | |
| Conductor entry angle | 45° to PCB | |
| PCB connection | Through-hole technology (THT), solder connection | |
| Solder pins per potential | 2 | |
| Solder pin arrangement | In-line across the terminal strip | |
| Solder pin length | 4.5 mm | |
| Solder pin dimensions | 1 × 1.4 mm | |
| PCB drilled hole diameter | 1.5 mm (+0.1 mm tolerance) | |
| Number of jumper slots | 1 | |
| Testing facility | Integrated testing tap | |
| Marking facility | Mini-WSB marker slot | |
| Mounting type | Through-hole PCB solder mounting | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Insulating material group | I | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | -60 to +105 °C | |
| Dimensions (W × H × D) | 24.1 × 27.5 × 29.1 mm | |
| Height above PCB surface | 23 mm | |
| Weight | Approx. 14.913 g | |
| Country of origin | Poland | |
| GTIN / EAN | 4055143489669 |
The WAGO 745-303/000-016/999-950 is a 3-pole PCB terminal block designed to provide reliable wire-to-board electrical connections. It is specifically suitable for Ex e increased safety applications and can be used in appropriately designed industrial control equipment, electronic assemblies and electrical systems requiring this type of connection.
The /999-950 suffix identifies the special WAGO 745 Series variant suitable for Ex e increased safety applications. Unlike the standard terminal block, this version has electrical ratings defined for Ex e use, including a rated current of 37 A and a rated voltage of 275 V under the applicable Ex e II conditions.
The terminal block has an Ex e II rated current of 37 A. When used with a suitable jumper, the Ex e II rated current is 31 A. The complete installation must remain within the applicable certified operating limits.
The WAGO 745-303/000-016/999-950 accepts solid conductors from 0.2–6 mm² and fine-stranded conductors from 0.2–4 mm². Fine-stranded conductors with ferrules and plastic collars are supported from 0.25–4 mm², while ferrules without plastic collars are supported from 0.25–2.5 mm².
Yes. This terminal block is suitable for Ex e increased safety applications when incorporated into appropriately designed and certified electrical equipment. Its suitability for a specific hazardous area depends on the complete equipment certification, operating conditions, installation methods and applicable hazardous-area standards.
WAGO 745 Series PCB terminal blocks provide dependable electrical connections for industrial automation, electronic equipment and specialist OEM manufacturing. The WAGO 745-303/000-016/999-950 combines proven CAGE CLAMP® spring pressure technology, a compact 3-pole design, green-yellow identification and suitability for Ex e increased safety applications to deliver a reliable connection solution for appropriately designed industrial electrical equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.