Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.57
The WAGO 723-603/018-042 is a 3-pole, single-conductor male pluggable connector from WAGO's MCS MIDI 723 Series. Featuring CAGE CLAMP® spring pressure connection technology, a 7.5 mm pin spacing and a preceding protective earth (PE) contact, this industrial connector is designed for dependable electrical interconnection in machinery, automation equipment and electrical control systems.
One of the distinguishing features of the WAGO 723-603/018-042 is its snap-in mounting feet, which support panel installation and integration into DIN-35 rail mounting arrangements. The connector also incorporates direct marking and a mechanically protected mating design intended to prevent incorrect connection with incompatible connector arrangements.
With a nominal conductor connection capacity of up to 2.5 mm², the WAGO 723-603/018-042 provides a practical solution for three-position electrical interfaces where secure conductor termination, protective earth contact sequencing and convenient equipment assembly are important. Its light grey housing and manufacturer-specific configuration make it suitable for OEM machine building, electrical panel construction and maintenance applications requiring an exact replacement component.
The WAGO 723-603/018-042 combines WAGO's established CAGE CLAMP® spring pressure termination technology with a three-pole MCS MIDI male connector arrangement. Spring pressure termination provides a consistent clamping force on appropriately prepared conductors and avoids reliance on a screw-tightening torque during normal conductor connection.
The connector's preceding PE contact is a particularly important feature for applications requiring protective earth continuity. In a correctly designed and compatible mating arrangement, the protective earth contact is intended to make contact before the other relevant contacts during connection and separate after them during disconnection. This feature does not remove the requirement for appropriate protective earthing, electrical isolation and compliance with the equipment's safety design.
The snap-in mounting feet support secure positioning within a suitable panel installation, while DIN-35 rail mounting arrangements provide flexibility in electrical cabinet design. Direct marking helps installers identify the connector configuration, and the integrated mismating protection helps reduce the risk of incorrect mechanical connection.
For a complete installation, engineers should verify the compatible female connector, panel dimensions, any required DIN-rail mounting adapter, conductor preparation and applicable current and voltage ratings. The connector should not be connected or disconnected under load unless the complete assembly is specifically approved for that operation.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 723 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 723-603/018-042 | |
| Series | 723 Series | |
| Connector family | MCS MIDI (Multi Connection System) | |
| Product type | Single-conductor male pluggable connector | |
| Connector gender | Male | |
| Number of connection positions | 3 | |
| Conductors per connection | 1 | |
| Nominal conductor cross-section | 2.5 mm² | |
| Conductor connection range | 0.08–2.5 mm², subject to conductor type and manufacturer requirements | |
| Connection technology | CAGE CLAMP® | |
| Conductor actuation | Operating tool | |
| Pin spacing | 7.5 mm | |
| Rated current | 12 A, as listed for this connector by the distributor; verify against the applicable operating conditions | |
| Protective earth arrangement | Preceding ground contact | |
| Mismating protection | 100% protected against mismating | |
| Mounting arrangement | DIN-35 rail/panel mounting | |
| Marking | Direct marking | |
| Packaging unit | 100 pieces | |
| Manufacturer variant | /018-042 |
The WAGO 723-603/018-042 is a three-pole male pluggable connector used in industrial electrical equipment, control panels and machinery. It features CAGE CLAMP® termination, snap-in mounting feet and a preceding protective earth contact for compatible modular connection assemblies.
The connector has a 7.5 mm pin spacing and belongs to WAGO's MCS MIDI connector family. Matching pitch alone does not guarantee compatibility; the mating connector must also have the correct mechanical and contact arrangement.
Yes. The connector incorporates a preceding protective earth (PE) contact, designed to establish the protective earth connection before the other relevant contacts when used with an appropriate mating component.
The connector features snap-in mounting feet and is designed for panel mounting or suitable DIN-35 rail mounting arrangements. The required mounting geometry and any additional mounting accessories should be checked against WAGO's installation documentation.
The connector uses CAGE CLAMP® technology with a nominal connection capacity of 2.5 mm². A conductor range of 0.08–2.5 mm² is listed for this product, although permitted conductor types, preparation requirements and any ferrule restrictions must be verified against the manufacturer's technical specifications.
WAGO connection technology is widely specified by industrial automation engineers, electrical panel builders and OEM machinery manufacturers. The WAGO 723-603/018-042 combines CAGE CLAMP® spring pressure termination, a preceding protective earth contact and snap-in mounting features in a three-pole MCS MIDI connector designed for dependable industrial electrical interconnection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.