Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.32
The WAGO 723-603/018-000 is a three-pole MCS MIDI male connector designed for reliable electrical connections in industrial equipment, automation systems and professional wiring assemblies. Part of the WAGO 723 Series, this connector uses CAGE CLAMP® spring connection technology to provide dependable conductor termination and convenient electrical installation.
Featuring a 7.5 mm pin spacing, three electrical connection positions and support for conductor cross-sections up to 2.5 mm², the connector provides a practical solution for wire-to-wire and board-to-wire connections. Its integrated snap-in mounting feet allow installation in compatible panels and mounting arrangements.
The connector incorporates mechanical coding fingers providing 100% protection against mismating. Its electrolytic copper contacts with tin plating and durable light grey polyamide housing support dependable electrical performance in industrial environments.
WAGO MCS MIDI connector systems provide practical solutions for establishing secure and organised electrical connections in industrial equipment, automation systems and professional electrical installations. CAGE CLAMP® spring connection technology provides dependable conductor termination without conventional screw connections, helping simplify wiring and maintenance procedures.
The three-pole configuration of the WAGO 723-603/018-000 allows multiple electrical circuits to be connected through one compact connector assembly. Its integrated snap-in mounting feet support secure panel installation, while the appropriate mounting adapter also allows DIN-35 rail installation.
The mechanical coding fingers help prevent incorrect connector combinations, while the robust PA66 housing and tin-plated electrolytic copper contacts support reliable electrical performance. The connector is suitable for both wire-to-wire and board-to-wire applications.
The WAGO MCS connector system does not provide switching capacity in accordance with DIN EN IEC 61984. Connectors must not be connected or disconnected while live or under electrical load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 723 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI / 723 Series | |
| Model | 723-603/018-000 | |
| Product type | One-conductor male connector | |
| Connector configuration | Male plug | |
| Number of potentials | 3 | |
| Number of clamping points | 3 | |
| Number of levels | 1 | |
| Pin spacing | 7.5 mm | |
| Rated current | 12 A (IEC) | |
| Rated impulse withstand voltage | 6 kV | |
| UL 1059 rated current | 15 A (Use Group B) | |
| UL 1059 rated voltage | 300 V (Use Group B) | |
| UL 1977 rated current | 15 A | |
| UL 1977 rated voltage | 600 V | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor cross-section (AWG) | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction | 0° relative to mating direction | |
| Mounting type | Panel mounting | |
| Mounting mechanism | Snap-in mounting feet | |
| DIN rail compatibility | TS 35 with suitable mounting adapter | |
| Housing sheet thickness | 0.6–1.2 mm | |
| Required mounting hole diameter | 3.5 mm (+0.1 mm) | |
| Mismating protection | 100% | |
| Mechanical coding | Variable coding | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability rating | UL 94 V-0 | |
| Width | 23.2 mm | |
| Height | 18.8 mm | |
| Depth | 27.5 mm | |
| Weight | Approx. 5.7 g | |
| Colour | Light grey |
The WAGO 723-603/018-000 is a three-pole male MCS MIDI connector designed for reliable wire-to-wire and board-to-wire connections in industrial equipment and automation systems.
The connector features three poles, providing three individual electrical connection points.
It uses CAGE CLAMP® spring connection technology, providing secure conductor termination using an operating tool.
The connector accommodates solid and fine-stranded conductors from 0.08 to 2.5 mm². The recommended insulation stripping length is 8–9 mm.
The connector has an IEC rated current of 12 A. Its UL rated current is 15 A under the applicable approval conditions.
The connector features a 7.5 mm pin spacing, making it suitable for compatible WAGO MCS MIDI connector arrangements.
Yes. The connector incorporates 100% protection against mismating through integrated mechanical coding fingers.
Yes. Its snap-in mounting feet support compatible panel mounting, and installation on a TS 35 DIN rail is possible using the appropriate WAGO mounting adapter.
No. The connector system is not intended for switching under electrical load. Connections must not be made or broken while live or carrying current.
WAGO MCS MIDI connectors provide dependable electrical interconnection solutions for industrial automation, machine building and professional electrical installations. Their CAGE CLAMP® technology, mechanical coding features and practical mounting arrangements support secure wiring and efficient equipment assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.