Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.90
The WAGO 722-741 is a reliable 11-pole straight through-hole technology (THT) female PCB header designed for secure pluggable electrical connections in industrial electronics, control equipment and automation systems. Part of the WAGO MCS MIDI 722 series, this connector provides a dependable interface for board-to-board and board-to-wire electrical connections.
Featuring a 7.5 mm contact pitch, eleven independent electrical potentials and 0.6 × 1.0 mm solder pins, the WAGO 722-741 is designed for secure printed circuit board installation using through-hole soldering technology. Its straight configuration provides a 90° mating direction relative to the PCB, while its single-row arrangement supports organised PCB layouts. The light grey polyamide housing provides electrical insulation and mechanical protection.
With an IEC rated current of 12 A, rated voltages of 500 V, 630 V or 1,000 V depending on the applicable overvoltage category and pollution degree, and a 6 kV rated impulse voltage, this connector is suitable for appropriately designed industrial electrical circuits. Its 100% protection against mismating, coding fingers and tin-plated copper alloy contacts support dependable modular electrical connections.
Through-hole PCB connectors such as the WAGO 722-741 provide a dependable interface between printed circuit boards and compatible pluggable electrical connectors. The solder pins are inserted through prepared PCB holes and soldered into position, creating permanent electrical and mechanical connections with the board circuitry.
The WAGO MCS MIDI 722 series is designed for modular electrical interconnection systems used in industrial automation, electronic control modules and machinery applications. Its 7.5 mm contact spacing, defined mating interface and protection against mismating help support repeatable assembly processes and reliable electrical connections.
The 11-pole configuration provides eleven separate electrical potentials through a single detachable interface. This makes the connector suitable for electronic modules requiring multiple power, control or signal connections. Its straight solder-pin arrangement provides a 90° mating direction relative to the PCB, supporting conventional through-hole PCB layouts.
The connector supports both board-to-board and board-to-wire connections. Integrated coding fingers help distinguish compatible connector arrangements, while touch-proof PCB outputs and retention latches support safer handling and secure mating with compatible WAGO MCS components.
WAGO MCS connectors are designed for electrical connections without breaking capacity in accordance with DIN EN 61984. They must not be connected or disconnected while live or under load. Appropriate electrical isolation and compatible mating components are essential for safe installation and maintenance.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 11 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI / 722 Series | |
| Model | 722-741 | |
| Product type | Straight THT female PCB header | |
| Connector configuration | Female socket | |
| Connection type | Printed circuit board | |
| Number of potentials | 11 | |
| Number of levels | 1 | |
| Number of solder pins per potential | 1 | |
| Pin spacing | 7.5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage | 6 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Connector orientation | Straight | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 0.6 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Width | 81.5 mm | |
| Height | 23.25 mm | |
| Height from PCB surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Contact plating | Tin-plated | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Colour | Light grey | |
| Mismating protection | 100% protected against mismating | |
| Coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Retention | Latches on the non-wire side | |
| Contact material | Copper alloy | |
| Contact finish | Tin | |
| Fire load | 0.255 MJ | |
| Weight | Approx. 12.8 g | |
| Packaging unit | 10 pieces | |
| GTIN | 4055143294027 | |
| Country of origin | Germany | |
| Connector system | WAGO MULTI CONNECTION SYSTEM (MCS) | |
| Electrical rating standard | IEC/EN 60664-1 | |
| UL approval references | E45172 and E45171 | |
| Railway approval | Railway Ready |
The WAGO 722-741 is an 11-pole straight THT female PCB header designed to provide detachable electrical connections between printed circuit boards and compatible mating connectors. It supports board-to-board and board-to-wire applications in industrial electronics, automation equipment and modular electrical assemblies.
The connector has an IEC rated current of 12 A. Its rated voltage is 500 V for overvoltage category III, pollution degree 3, 630 V for overvoltage category III, pollution degree 2, and 1,000 V for overvoltage category II, pollution degree 2. It also has a 6 kV rated impulse voltage. The applicable electrical rating depends on the installation conditions and relevant standards.
The connector uses through-hole technology (THT) with 0.6 × 1.0 mm solder pins and a 5 mm solder pin length. The pins are inserted into prepared PCB holes and soldered to establish electrical and mechanical connections. The recommended drilled hole diameter is 1.3 mm with a positive tolerance of 0.1 mm.
Yes. The connector provides 100% protection against mismating and incorporates coding fingers and anti-rotation protection to support correct connector identification and engagement. Its touch-proof PCB outputs and non-wire-side retention latches also support safer handling and secure mating with compatible WAGO MCS components.
The connector measures 81.5 mm wide, 23.25 mm high and 11.6 mm deep, with a height above the PCB surface of 18.25 mm. It features a light grey polyamide 66 housing, tin-plated copper alloy contacts and an operating temperature range of −60 to +85 °C. Its approximate weight is 12.8 g.
WAGO MCS MIDI pluggable connectors provide dependable modular electrical connections for industrial electronics, automation equipment and electrical assemblies. The WAGO 722-741 combines an 11-pole female PCB header, 7.5 mm contact pitch, through-hole solder mounting and protection against mismating to support reliable board-to-board and board-to-wire electrical interconnections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.