Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.62
The WAGO 722-735/031-000 is a robust 5-pole through-hole technology (THT) female PCB header designed for reliable pluggable electrical connections in industrial electronics, control equipment and automation systems. Part of the WAGO MCS MIDI 722 series, this connector provides a dependable interface between printed circuit boards and compatible mating connectors.
Featuring a wider 7.5 mm contact pitch, five independent electrical potentials and 0.6 × 1.0 mm solder pins, the WAGO 722-735/031-000 is designed for secure PCB installation using through-hole soldering technology. Its straight connector configuration provides a 90° mating direction relative to the PCB, while the integrated mounting flange supports feed-through and panel mounting applications. The light grey polyamide housing provides electrical insulation and mechanical protection.
With an IEC rated current of 12 A, rated voltages of up to 1,000 V depending on the applicable overvoltage category and pollution degree, and a 6 kV rated impulse voltage, this connector is suitable for appropriately designed industrial electrical circuits. Its 100% protection against mismating, tin-plated copper alloy contacts and clamping collar construction make it suitable for dependable modular PCB interconnections.
Through-hole PCB connectors such as the WAGO 722-735/031-000 provide a dependable interface between printed circuit boards and compatible pluggable electrical connectors. The solder pins are inserted through prepared PCB holes and soldered into position, creating permanent electrical and mechanical connections with the board circuitry.
The WAGO MCS MIDI 722 series is designed for modular electrical interconnection systems used in industrial automation, electronic control modules and machinery applications. Its wider 7.5 mm contact spacing provides a different connector layout from the 5 mm MCS MIDI variants, allowing designers to select an appropriate configuration for their PCB and electrical requirements.
The five-pole configuration provides five separate electrical potentials through one detachable interface. Its mounting flange and clamping collar support feed-through and panel mounting arrangements, while the straight solder pins provide a 90° mating direction relative to the PCB.
The connector supports board-to-board and board-to-wire connection arrangements when used with compatible WAGO MCS components. Its coding fingers and mismating protection help prevent incorrect connector engagement, while its touch-protected PCB outputs support safer handling during equipment assembly and maintenance.
WAGO MCS connectors are designed for electrical connections without breaking capacity in accordance with DIN EN 61984. They must not be connected or disconnected while live or under load. Appropriate electrical isolation and compatible mating components are essential for safe installation and maintenance.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI / 722 Series | |
| Model | 722-735/031-000 | |
| Product type | Straight THT female PCB header | |
| Connector configuration | Female socket | |
| Connection type | Printed circuit board | |
| Number of potentials | 5 | |
| Number of levels | 1 | |
| Number of solder pins per potential | 1 | |
| Pin spacing | 7.5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage | 6 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Connector orientation | Straight | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 0.6 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Suitable PCB thickness | 1.5 mm | |
| Mounting type | Mounting flange | |
| Mounting arrangement | Feed-through and panel mounting | |
| Mounting collar | Clamping collar | |
| Width | 49.8 mm | |
| Height | 23.25 mm | |
| Height from mounting surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin-plated | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Colour | Light grey | |
| Mismating protection | 100% protected against mismating | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Locking mechanism | None | |
| Weight | Approx. 6.052 g | |
| Packaging unit | 50 pieces | |
| GTIN | 4044918627368 | |
| Country of origin | Germany | |
| Connector system | WAGO MULTI CONNECTION SYSTEM (MCS) | |
| Electrical rating standard | IEC/EN 60664-1 | |
| UL approval reference | E45171 | |
| RoHS compliance | Compliant, no exemption |
The WAGO 722-735/031-000 is a 5-pole straight THT female PCB header designed to provide detachable electrical connections between printed circuit boards and compatible mating connectors. It is suitable for industrial electronics, automation equipment, control modules and panel-mounted electrical assemblies.
The connector has an IEC rated current of 12 A. Its rated voltage is 500 V for overvoltage category III, pollution degree 3, 630 V for overvoltage category III, pollution degree 2, and 1,000 V for overvoltage category II, pollution degree 2. It also has a 6 kV rated impulse voltage. The applicable electrical rating depends on the installation conditions and relevant standards.
The connector uses through-hole technology (THT) with 0.6 × 1.0 mm solder pins and a 5 mm solder pin length. The pins are inserted into prepared PCB holes and soldered to establish electrical and mechanical connections. The recommended drilled hole diameter is 1.3 mm with a positive tolerance of 0.1 mm.
Yes. The connector features 100% protection against mismating and supports variable coding and anti-rotation protection. These features help ensure correct connector identification and engagement with compatible WAGO MCS MIDI components.
The connector supports feed-through and panel mounting using its integrated mounting flange and clamping collar. It measures 49.8 mm wide, 23.25 mm high and 11.6 mm deep, with a height from the mounting surface of 18.25 mm. Its operating temperature range is −60 to +85 °C.
WAGO MCS MIDI pluggable connectors provide dependable modular electrical connections for industrial electronics, automation equipment and electrical assemblies. The WAGO 722-735/031-000 combines a five-pole female PCB header, 7.5 mm contact pitch, through-hole solder mounting and an integrated mounting flange to support reliable board-to-board and board-to-wire electrical interconnections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.