Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.05
The WAGO 722-234/047-000 is a 4-pole angled female PCB header with spacer flange, designed for reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. Part of the WAGO 722 Series MCS MIDI Multi Connection System, this connector combines a 5 mm contact pitch, through-hole solder termination and an angled mating interface with a practical spacer flange for panel and flush-mounting applications.
The distinguishing feature of the 722-234/047-000 is its integrated spacer flange, which provides an additional mounting feature compared with the standard WAGO 722-234 header. The connector supports flush mounting and panel mounting, making it particularly useful in industrial electronic equipment where the connector interface must be positioned and supported within an enclosure or mounting arrangement.
With an IEC rated current of 12 A, a rated voltage of 320 V under overvoltage category III and pollution degree 2 conditions, and 100% mechanical mismating protection, the WAGO 722-234/047-000 offers a dependable solution for modular PCB connections. Its tin-plated copper alloy contacts, light grey PA66 housing and four independent electrical potentials make it suitable for professional industrial electronic assemblies.
The WAGO 722-234/047-000 provides a secure electrical interface between printed circuit boards and compatible pluggable connectors. It is a female PCB header with through-hole solder contacts, rather than a conductor termination plug. Its rectangular solder pins are inserted into correctly drilled PCB holes and soldered to establish a permanent electrical connection to the circuit board.
The connector's angled construction allows the mating interface to be accessed parallel to the PCB surface. This configuration is useful in industrial equipment where vertical space is limited or where cables must be routed towards an enclosure wall or circuit board edge.
A defining feature of the /047-000 variant is its spacer flange. This provides an additional mechanical mounting feature and supports the connector's specified flush-mounting and panel-mounting arrangements. Compared with the standard WAGO 722-234, the spacer flange version has a greater overall width, making it important to account for the mounting geometry when designing PCB layouts and equipment enclosures.
The connector incorporates mechanical mismating protection to help prevent incorrect engagement with incompatible connector components. Its four independent electrical potentials and 5 mm pitch provide an organised interface for industrial control, power and signal circuits, subject to the electrical requirements of the complete assembly.
The tin-plated copper alloy contacts provide an electrically conductive mating interface, while the PA66 polyamide housing supplies insulation and mechanical protection. The material's UL94 V-0 flammability classification supports use in industrial electronic equipment requiring flame-retardant insulating components.
The WAGO 722-234/047-000 should be installed using the manufacturer's PCB layout and mounting recommendations, with a correctly matched mating connector. WAGO MCS connectors are not intended for load-breaking operation and should be de-energised before mating or unmating.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 722-234/047-000 | |
| Series | 722 Series – MCS MIDI | |
| Product type | THT female PCB header with spacer flange | |
| Connector configuration | Angled female socket header | |
| Mating direction to PCB | 0° (parallel to PCB surface) | |
| Number of potentials | 4 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder pin arrangement | In-line | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 0.6 × 1 mm | |
| Solder pin length | 5 mm | |
| PCB drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange | |
| Mounting arrangements | Flush mounting; panel mounting | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Contact material | Copper alloy | |
| Contact plating | Tin-plated | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +85 °C | |
| Mechanical mismating protection | Yes | |
| Width | 34.8 mm | |
| Height | 16.6 mm | |
| Height above PCB surface | 11.6 mm | |
| Depth | 18.25 mm | |
| Weight | Approx. 4.698 g | |
| Country of origin | Germany | |
| GTIN | 4044918580649 |
The WAGO 722-234/047-000 is a 4-pole angled female PCB header with a spacer flange. It is used for pluggable electrical connections in industrial PCB assemblies, control electronics and equipment requiring compatible flush-mounting or panel-mounting arrangements.
Both are 4-pole angled female through-hole PCB headers with a 5 mm contact pitch. The 722-234/047-000 includes a spacer flange and supports flush mounting and panel mounting. The standard 722-234 does not have the same spacer flange configuration.
The connector has 4 poles, providing four independent electrical potentials in a single-level arrangement. Its nominal contact pitch is 5 mm.
The spacer flange provides an additional mechanical mounting feature for the connector. It supports the specified flush-mounting and panel-mounting arrangements and must be accounted for when designing the PCB and equipment enclosure.
The connector has an IEC rated current of 12 A. Its rated voltage is 320 V under overvoltage category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the installation environment and complete connector assembly.
The connector uses through-hole technology (THT) with rectangular solder pins measuring 0.6 × 1 mm and a pin length of 5 mm. The specified drilled hole diameter is 1.3 mm with a +0.1 mm tolerance. Its spacer flange provides an additional mounting feature.
The connector measures approximately 34.8 mm wide, 16.6 mm high and 18.25 mm deep. Its height above the PCB surface is approximately 11.6 mm, and its weight is approximately 4.698 g.
Yes. The WAGO 722-234/047-000 incorporates mechanical mismating protection to help prevent incorrect engagement with incompatible connector components.
The connector features tin-plated copper alloy contacts and a light grey PA66 polyamide insulating housing. The housing material has a UL94 V-0 flammability classification.
The WAGO MCS connection system is not intended for load-breaking operation. The connector should be de-energised before mating or unmating, and the equipment must prevent access to hazardous live contacts.
WAGO 722 Series MCS MIDI connectors provide dependable pluggable electrical connections for industrial electronic equipment, automation systems and PCB assemblies. With its four-pole design, angled through-hole termination, spacer flange and mechanical mismating protection, the WAGO 722-234/047-000 offers a practical solution for panel-mounted and flush-mounted industrial PCB connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.