Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.16
The WAGO 722-234/039-000 is a high-quality 4-pole female PCB header designed to provide reliable pluggable electrical connections in industrial automation, control panels and electronic equipment. Part of the established WAGO 722 Series MCS MIDI connector system, this through-hole technology (THT) connector features angled 0.6 × 1 mm solder pins, 5 mm contact spacing and an integrated locking lever for secure mechanical retention.
Designed for board-to-board and board-to-wire applications, the connector provides a dependable interface between printed circuit boards and compatible WAGO MCS MIDI male connectors. Its integrated locking lever helps prevent accidental disconnection, while coding fingers and 100% protection against mismating support safe and accurate electrical connections during installation.
Featuring 4 poles, a 12 A rated current and a rated voltage of 630 V under IEC overvoltage category II conditions, the WAGO 722-234/039-000 is suitable for industrial electronic assemblies, machine building and modular electrical equipment. Its light grey PA66 housing and tin-plated copper alloy contacts provide a durable connection solution for professional electrical installations.
The WAGO MCS MIDI connector system is designed to provide modular electrical connections between printed circuit boards, wiring assemblies and industrial equipment. Its pluggable connection concept allows manufacturers to simplify equipment assembly while making electrical connections easier to access during servicing and maintenance.
The 722-234/039-000 uses through-hole mounting technology, with angled solder pins passing through the PCB and being soldered to establish secure electrical and mechanical connections. Its 5 mm pitch provides compatibility with corresponding WAGO MCS MIDI connector configurations.
A key feature of this model is its integrated locking lever. This provides additional mechanical retention when a compatible male connector is inserted, helping prevent accidental disconnection during equipment operation.
The connector also incorporates coding fingers and 100% protection against mismating. These features help ensure correct connector alignment and reduce the risk of incorrect electrical connections in industrial equipment.
Its touch-proof PCB output design provides additional protection when the connector is unmated. The PA66 housing, copper alloy contacts and tin-plated contact surfaces provide a durable construction suitable for professional electrical and electronic assemblies.
Important: Confirm the PCB footprint, drilled hole dimensions and mating connector before installation. WAGO MCS connectors do not have breaking capacity according to DIN EN 61984 and must not be connected or disconnected while live or under electrical load. Ensure accessible PCB contacts are not energised when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 722 MCS MIDI | |
| Model | 722-234/039-000 | |
| Product type | THT female PCB header | |
| Connector gender | Female | |
| Total number of potentials | 4 | |
| Number of connection levels | 1 | |
| Number of solder pins per potential | 1 | |
| Pin spacing | 5 mm | |
| PCB mounting technology | Through-hole (THT) | |
| Connection type | Solder connection | |
| Connector orientation | Angled | |
| Mating direction relative to PCB | 0° | |
| Solder pin arrangement | In-line across the female connector | |
| Solder pin dimensions | 0.6 × 1 mm | |
| Solder pin length | 5 mm | |
| Recommended drilled hole diameter | 1.3 mm (+0.1 mm) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III / pollution degree 3) | 320 V | |
| Rated voltage (IEC, category III / pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Width | 35.8 mm | |
| Height | 16.6 mm | |
| Height from mounting surface | 11.6 mm | |
| Depth | 18.25 mm | |
| Housing material | Polyamide 66 (PA66) | |
| Contact material | Copper alloy | |
| Contact plating | Tin-plated | |
| Material group | I | |
| Flammability rating | UL94 V-0 | |
| Fire load | 0.089 MJ | |
| Locking mechanism | Integrated locking lever | |
| Protection against mismating | 100% | |
| Contact protection | Touch-proof PCB outputs | |
| Weight | Approx. 4.64 g | |
| Country of origin | Germany | |
| EAN / GTIN | 4044918627092 | |
| UL approval | UL International Germany GmbH, E45171 |
The WAGO 722-234/039-000 is a 4-pole female PCB header designed for through-hole mounting and reliable pluggable electrical connections in industrial automation and electronic equipment.
The connector features 4 poles arranged in a single row with a 5 mm contact spacing.
The WAGO 722-234/039-000 has an IEC rated current of 12 A. Its UL 1059 and CSA current ratings are 15 A for Use Group B and 10 A for Use Group D.
The connector has a nominal voltage of 320 V under IEC overvoltage category III conditions and 630 V under overvoltage category II and pollution degree 2. Its rated impulse voltage is 4 kV.
The connector features angled 0.6 × 1 mm solder pins with a specified pin length of 5 mm.
The specified drilled hole diameter is 1.3 mm with a +0.1 mm tolerance. The PCB footprint should be checked against the manufacturer's recommended layout before production.
Yes. The connector incorporates an integrated locking lever that provides mechanical retention when connected to a compatible male MCS MIDI connector.
Yes. The WAGO 722-234/039-000 features 100% protection against mismating and integrated coding fingers to help prevent incorrect connections.
The housing is manufactured from polyamide 66 (PA66), a durable thermoplastic material with a UL94 V-0 flammability classification. The contacts are made from tin-plated copper alloy.
The connector has a specified operating temperature range of approximately -60 to +85 °C.
Yes. The connector is designed for both board-to-board and board-to-wire connections, allowing integration into modular electronic and industrial electrical assemblies.
Compatible accessories include the WAGO 210-136 and 210-137 test plugs, the 231-661 test plug for 5 mm and 5.08 mm pin spacing, and marking strips 210-833 and 210-834.
No. WAGO MCS connectors do not have breaking capacity according to DIN EN 61984 and must not be connected or disconnected while live or under electrical load. Always isolate the electrical supply before disconnecting the connector.
WAGO 722 Series MCS MIDI connectors provide dependable pluggable electrical connections for industrial automation, electronic equipment and PCB assemblies. Combining through-hole mounting, angled solder pins, an integrated locking lever and protection against mismating, the 722-234/039-000 is a practical solution for professional electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.