Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.66
The WAGO 722-136 is a high-quality 6-pole through-hole technology (THT) female PCB header designed for reliable pluggable electrical connections in industrial electronics, control equipment and automation systems. Part of the WAGO MCS MIDI 722 series, this connector provides a dependable interface between printed circuit boards and compatible mating connectors.
Featuring a 5 mm contact pitch, straight connector orientation and 0.6 × 1.0 mm solder pins, the WAGO 722-136 is designed for secure installation on printed circuit boards using through-hole soldering technology. Its six-pole configuration provides six separate electrical potentials, making it suitable for modular electronic equipment requiring multiple electrical connections within a compact connector arrangement.
With a 12 A IEC rated current, rated voltages of 320 V or 630 V depending on the applicable overvoltage category and pollution degree, and a 4 kV rated impulse voltage, the connector is suitable for appropriately designed industrial electrical circuits. Its tin-plated copper alloy contacts, polyamide insulating housing and protection against mismating help provide dependable performance in demanding electrical assemblies.
Through-hole PCB connectors such as the WAGO 722-136 provide a dependable electrical interface between printed circuit boards and compatible pluggable wiring connectors. The connector's solder pins are inserted through prepared PCB holes and soldered to establish permanent electrical and mechanical connections with the board circuitry.
The WAGO MCS MIDI 722 series is designed for modular electrical interconnection systems used in industrial automation, electronic control modules and machinery equipment. Its defined mating interface, compact contact spacing and protection against mismating help support repeatable assembly processes and reliable electrical connections.
The six-pole configuration allows multiple electrical potentials to be connected through a single detachable interface. This is particularly useful in equipment requiring organised PCB-to-wire connections, modular electronic assemblies and replaceable control modules. The connector's variable coding capability also supports the differentiation of compatible connector arrangements.
WAGO MCS connectors are intended for electrical connections without breaking capacity. They must not be connected or disconnected while live or under load. Appropriate electrical isolation, mating compatibility and insulation coordination must be considered during equipment design and installation.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI / 722 Series | |
| Model | 722-136 | |
| Product type | THT female PCB header | |
| Connector configuration | Female socket | |
| Number of potentials | 6 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Number of solder pins per potential | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Connector orientation | Straight | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 0.6 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Solder pin arrangement | In line across the female connector | |
| Width | 31.5 mm | |
| Height | 23.25 mm | |
| Height above PCB surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Processing temperature range | −35 to +60 °C | |
| Colour | Light grey | |
| Mismating protection | Yes | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Weight | Approx. 5.6 g | |
| Packaging unit | 50 pieces | |
| GTIN | 4044918580472 | |
| Country of origin | Germany | |
| Connector system | WAGO MULTI CONNECTION SYSTEM (MCS) | |
| Electrical rating standard | IEC/EN 60664-1 |
The WAGO 722-136 is a 6-pole straight THT female PCB header designed to provide detachable electrical connections between printed circuit boards and compatible mating connectors. It is suitable for industrial electronics, automation equipment, control modules and modular electrical assemblies.
The connector has an IEC rated current of 12 A. Its rated voltage is 320 V for overvoltage category III, pollution degree 3, and 630 V for overvoltage category II, pollution degree 2. The connector also has a 4 kV rated impulse voltage. The applicable electrical rating depends on the installation conditions and relevant standards.
The connector uses through-hole technology (THT) with 0.6 × 1.0 mm solder pins and a 5 mm solder pin length. The pins are inserted into prepared PCB holes and soldered to establish electrical and mechanical connections. The specified drilled hole diameter is 1.3 mm with a positive tolerance of 0.1 mm.
Yes. The connector features protection against mismating, along with variable coding capability and anti-rotation protection. These features help support correct connector engagement and reliable assembly when the product is used with appropriately matched WAGO MCS MIDI mating components.
The connector features a polyamide 66 (PA66) insulating housing with a UL 94 V-0 flammability classification and tin-plated copper alloy contacts. Its specified operating temperature range is −60 to +85 °C, making it suitable for appropriately designed industrial electronic assemblies.
WAGO MCS MIDI pluggable connectors are designed to support dependable modular electrical connections in industrial electronics, automation equipment and electrical assemblies. The WAGO 722-136 combines a compact 6-pole PCB header design, through-hole solder mounting, tin-plated contacts and protection against mismating to provide a practical connection solution for industrial equipment manufacturers and electronics engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.