Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.24
The WAGO 722-135 is a high-quality 5-pole straight female PCB header designed for dependable electrical connections in industrial automation, electronic control systems and printed circuit board assemblies. Part of the established WAGO MCS MIDI 722 series, this connector provides a compact, detachable electrical interface for board-to-wire and board-to-board applications where reliable connection performance and efficient installation are essential.
Featuring 5 mm pin spacing, 0.6 × 1 mm rectangular solder pins and through-hole technology (THT), the WAGO 722-135 is designed for permanent solder mounting onto printed circuit boards. Its straight solder-pin arrangement provides a 90° mating direction relative to the PCB, supporting convenient vertical plug-in connections. Mechanical mismating protection, variable coding and anti-rotation features help maintain correct connector alignment.
With a 12 A IEC rated current, 320 V IEC rated voltage under overvoltage category III, pollution degree 3, and five independent electrical potentials, the WAGO 722-135 provides a practical solution for industrial electronic equipment. Its light grey polyamide housing, tin-plated copper alloy contacts and touch-protected female interface support reliable electrical performance, while the modular plug-in design simplifies equipment assembly, maintenance and replacement.
The WAGO 722-135 uses through-hole solder technology to establish a permanent electrical and mechanical connection to printed circuit boards. Its five rectangular solder pins are inserted through designated PCB holes and soldered into place, creating a stable interface for detachable external connections. Unlike WAGO wire-entry connectors equipped with CAGE CLAMP® technology, this component is a female PCB header and does not incorporate separate conductor clamping terminals.
The connector's 5-pole straight configuration provides five independent electrical potentials with 5 mm contact spacing. Its 90° mating direction relative to the PCB supports vertical plug-in connections, while mechanical mismating protection, anti-rotation features and variable coding help ensure correct connector engagement. The WAGO 722-135 can be paired with compatible MCS MIDI male connectors, including selected WAGO 721-605 series variants featuring CAGE CLAMP® conductor termination.
The WAGO MCS MIDI 722 series is designed for modular industrial electrical assemblies requiring reliable detachable connections between printed circuit boards and external wiring. The WAGO 722-135 combines durable polyamide insulation, tin-plated copper alloy contacts and a soldered PCB interface to support dependable operation. It is a connector without load-breaking capacity under IEC 61984 and must not be connected or disconnected while live or under load. Equipment designers must also ensure that accessible contacts cannot remain dangerously energised when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI 722 Series | |
| Manufacturer part number | 722-135 | |
| Product type | THT female PCB header | |
| Connector gender | Female / socket | |
| Connector orientation | Straight | |
| Total number of electrical potentials | 5 | |
| Number of connection points | 5 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder-pin arrangement | In-line, across the female connector | |
| Number of solder pins per potential | 1 | |
| Solder-pin dimensions | 0.6 × 1 mm | |
| Solder-pin length | 5 mm | |
| Recommended PCB drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC III/3) | 320 V | |
| Rated impulse voltage (IEC III/3) | 4 kV | |
| Rated voltage (IEC III/2) | 320 V | |
| Rated impulse voltage (IEC III/2) | 4 kV | |
| Rated voltage (IEC II/2) | 630 V | |
| Rated impulse voltage (IEC II/2) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Width | 26.5 mm | |
| Height | 23.25 mm | |
| Height from PCB surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Overall dimensions (W × H × D) | 26.5 × 23.25 × 11.6 mm | |
| Housing material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL94 V-0 | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Mechanical mismating protection | 100% mechanically protected | |
| Anti-rotation protection | Yes | |
| Coding | Variable coding supported | |
| Touch protection | Touch-protected female connector interface | |
| Temperature limit range | −60 to +85 °C | |
| Processing temperature range | −35 to +60 °C | |
| Product weight | 4.7 g | |
| Fire load | 0.08 MJ | |
| PCB mounting application | Printed circuit boards | |
| Compatible mating connector | WAGO 721-605 series, subject to variant compatibility | |
| Connector safety standard | IEC 61984 | |
| Load-breaking capability | Not designed for connection or disconnection while live or under load | |
| RoHS compliance | Compliant, without exemption | |
| Packaging unit | 100 pieces | |
| Country of origin | Germany | |
| GTIN | 4044918580441 |
The WAGO 722-135 is a 5-pole straight female PCB header used to create detachable electrical connections between printed circuit boards and compatible pluggable connectors in industrial automation, electronic control equipment and modular electrical assemblies.
The WAGO 722-135 has 5 poles and five separate electrical potentials. It features 5 mm pin spacing and a single row of through-hole solder pins for PCB mounting.
The connector has an IEC rated current of 12 A. Its IEC rated voltage is 320 V under overvoltage category III, pollution degree 3, and 630 V under category II, pollution degree 2. The applicable rating depends on the electrical standard, installation conditions and compatible mating component.
The WAGO 722-135 uses through-hole technology (THT) with 0.6 × 1 mm rectangular solder pins measuring 5 mm in length. The pins are inserted into appropriately sized PCB holes and soldered to the board. The specified drilled hole diameter is 1.3 mm with a +0.1 mm tolerance.
No. The WAGO 722-135 is a female PCB header with soldered through-hole terminals rather than a wire-entry connector with integrated CAGE CLAMP® conductor connections. It can be used with compatible WAGO MCS MIDI male connectors, including selected 721-605 series variants that provide CAGE CLAMP® conductor termination.
WAGO MCS MIDI 722 series connectors provide dependable modular electrical interfaces for industrial automation, electronic equipment and PCB-based control systems. Combining a compact five-pole configuration, 5 mm contact spacing, 12 A IEC rated current, reliable through-hole solder termination and mechanical mismating protection, the WAGO 722-135 offers a practical solution for professional electronic assemblies requiring secure, detachable connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.