Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.05
The WAGO 722-134/047-000 is a high-quality 4-pole female PCB header designed to provide reliable pluggable electrical connections in industrial automation, control panels and electronic equipment. Part of the established WAGO 722 Series MCS MIDI connector system, this through-hole technology (THT) connector features straight solder pins, 5 mm contact spacing and an integrated spacer flange for secure PCB installation.
Designed for dependable board-to-wire and board-to-board connections, the connector provides a reliable interface for compatible WAGO MCS MIDI mating components. Its integrated spacer flange helps establish the required mounting position and mechanical clearance, while 100% protection against mismating helps prevent incorrect connections during installation.
Featuring 4 poles, a 12 A rated current and a rated voltage of 630 V under IEC overvoltage category II conditions, the WAGO 722-134/047-000 is suitable for industrial electronic assemblies, machine building and modular electrical equipment. Its light grey polyamide 66 housing and tin-plated copper alloy contacts provide a durable connection solution for professional electrical installations.
The WAGO MCS MIDI connector system is designed to provide modular electrical connections between printed circuit boards, wiring assemblies and industrial equipment. Its pluggable connection concept allows manufacturers to simplify equipment assembly while making electrical connections easier to access during servicing and maintenance.
The 722-134/047-000 uses through-hole mounting technology, with straight solder pins passing through the PCB and being soldered to establish secure electrical and mechanical connections. Its 5 mm pitch provides compatibility with corresponding WAGO MCS MIDI connector configurations.
A distinguishing feature of this model is its integrated spacer flange. This provides additional mounting clearance between the connector housing and the printed circuit board, helping establish the intended mechanical positioning within an electrical assembly.
The connector also incorporates 100% protection against mismating, helping ensure correct connector alignment and reducing the risk of incorrect electrical connections. Its modular construction supports efficient manufacturing and straightforward equipment servicing.
The combination of a PA66 insulating housing, copper alloy contacts and tin-plated contact surfaces provides a durable construction for professional electrical and electronic assemblies.
Important: Confirm the PCB footprint, drilled hole dimensions, mating connector and applicable electrical ratings before installation. The appropriate rated voltage depends on the applicable overvoltage category and pollution degree. Always follow the manufacturer's installation instructions.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 722 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 722 MCS MIDI | |
| Model | 722-134/047-000 | |
| Product type | THT female PCB header | |
| Connector gender | Female | |
| Total number of potentials | 4 | |
| Number of connection levels | 1 | |
| Number of solder pins per potential | 1 | |
| Pin spacing | 5 mm | |
| PCB mounting technology | Through-hole (THT) | |
| Connection type | Solder connection | |
| Solder pin arrangement | Straight, in-line across the female connector | |
| Solder pin dimensions | 0.6 × 1 mm | |
| Solder pin length | 5 mm | |
| Recommended drilled hole diameter | 1.3 mm (+0.1 mm) | |
| Mating direction relative to PCB | 90° | |
| Mounting type | Integrated spacer flange | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, category III / pollution degree 3) | 320 V | |
| Rated voltage (IEC, category III / pollution degree 2) | 320 V | |
| Rated voltage (IEC, category II / pollution degree 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Width | 34.8 mm | |
| Height | 23.25 mm | |
| Height from mounting surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Housing material | Polyamide 66 (PA66) | |
| Contact material | Copper alloy | |
| Contact plating | Tin-plated | |
| Material group | I | |
| Flammability rating | UL94 V-0 | |
| Fire load | approx. 0.091 MJ | |
| Protection against mismating | 100% | |
| PCB connection type | THT solder connection | |
| EAN / GTIN | 4044918580434 |
The WAGO 722-134/047-000 is a 4-pole female PCB header designed for through-hole mounting and reliable pluggable electrical connections in industrial automation and electronic equipment.
The connector features 4 poles arranged in a single row with a 5 mm contact spacing.
The WAGO 722-134/047-000 has an IEC rated current of 12 A. Its UL 1059 and CSA current ratings are 15 A for Use Group B and 10 A for Use Group D.
The connector has a nominal voltage of 320 V under IEC overvoltage category III conditions and 630 V under overvoltage category II and pollution degree 2. Its rated impulse voltage is 4 kV.
The connector features straight 0.6 × 1 mm solder pins with a specified pin length of 5 mm.
The specified drilled hole diameter is 1.3 mm with a +0.1 mm tolerance. The PCB footprint should be checked against the manufacturer's recommended layout before production.
The integrated spacer flange provides additional clearance between the connector housing and the PCB mounting surface, helping establish the intended mechanical positioning of the connector.
Yes. The connector features 100% protection against mismating, helping prevent incorrect connections when used with compatible WAGO MCS MIDI components.
The housing is manufactured from polyamide 66 (PA66), a durable thermoplastic material with a UL94 V-0 flammability classification. The contacts are made from tin-plated copper alloy.
The connector has a specified operating temperature range of approximately -60 to +85 °C.
Both are 4-pole female PCB headers with 5 mm contact spacing. The 722-134/039-000 features an integrated locking lever, whereas the 722-134/047-000 features a spacer flange for additional PCB mounting clearance.
WAGO 722 Series MCS MIDI connectors provide dependable pluggable electrical connections for industrial automation, electronic equipment and PCB assemblies. Combining through-hole mounting, straight solder pins, an integrated spacer flange and protection against mismating, the 722-134/047-000 is a practical solution for professional electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.