Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.55
The WAGO 721-867/001-000 is a high-quality 7-pole angled through-hole technology (THT) male PCB header, designed to provide reliable pluggable electrical connections in industrial electronics, automation equipment and control systems. Part of the established WAGO 721 MCS MIDI series, this connector features a 7.5 mm contact pitch, 1.2 × 1.2 mm square solder pins and a right-angle configuration for printed circuit board applications.
Featuring seven individual electrical contact positions and a 16 A IEC rated current, the WAGO 721-867/001-000 provides a dependable interface between printed circuit boards and compatible detachable wiring connectors. Its angled construction allows the mating connector to approach parallel to the PCB surface, making it particularly suitable for equipment where horizontal cable routing, enclosure clearances and convenient connector access are important.
Unlike direct wire-entry connectors equipped with CAGE CLAMP® spring pressure terminals, the WAGO 721-867/001-000 is a solder-mounted PCB header. Its seven square metal pins are inserted into a compatible PCB footprint and permanently connected using through-hole soldering. A suitable female mating connector then provides the detachable interface between the PCB and external wiring.
The connector incorporates mechanical coding features, protection against mismating and a four-sided shrouded male contact arrangement. Its light grey polyamide 66 housing, tin-plated electrolytic copper contacts and robust solder pin construction make it a practical choice for industrial equipment manufacturers requiring reliable seven-pole PCB connections.
Specification note: The technical values above are based on published WAGO product data for 721-867/001-000. IEC voltage ratings vary according to overvoltage category and pollution degree. The complete connector assembly, PCB layout and selected mating component must satisfy the applicable electrical and mechanical requirements. The temperature figures are component limit values and do not automatically establish the operating temperature rating of the complete assembly.
Industrial electronic equipment depends on secure electrical connections between printed circuit boards and external wiring. The WAGO 721 MCS MIDI series provides a modular connection system that supports detachable electrical interfaces in industrial control, automation and power distribution applications.
The WAGO 721-867/001-000 is specifically designed for through-hole PCB mounting. Its seven square solder pins are inserted into a compatible printed circuit board footprint and soldered to form permanent electrical connections between the PCB and the header contacts.
Once installed, the male header can be connected to a suitable female plug from the compatible WAGO MCS MIDI range. This allows equipment manufacturers to maintain a permanent PCB connection while providing a detachable interface for field wiring, cable harnesses and modular electrical assemblies.
The connector's 90° angled orientation is particularly useful where the mating connector must approach parallel to the circuit board. This arrangement can simplify cable routing, improve access during maintenance and help accommodate electrical connections within industrial enclosures.
With a 7.5 mm contact pitch and 1.2 × 1.2 mm solder pins, the WAGO 721-867/001-000 provides a robust seven-pole connection interface. The connector carries a 16 A IEC rated current under the specified conditions, although the usable current in an assembled product also depends on the mating connector, PCB conductors and thermal design.
The integrated mechanical coding system helps protect against incorrect mating when compatible components are selected and configured correctly. This is especially valuable in industrial equipment containing multiple detachable connections, where reducing assembly and maintenance errors is an important consideration.
The WAGO 721-867/001-000 must be installed using a printed circuit board footprint designed for its 7.5 mm contact pitch, 1.2 × 1.2 mm square solder pins and right-angle orientation.
WAGO specifies a 1.7 mm drilled hole diameter with a +0.1 mm tolerance. The complete PCB footprint should also account for the manufacturer's recommended pad dimensions, solder mask clearances, copper track spacing and required electrical creepage and clearance distances.
During assembly, the header should be correctly seated before soldering. All seven solder joints should be inspected for proper wetting, mechanical strength and electrical continuity. Appropriate soldering conditions must be used to prevent damage to the insulating housing and contact assembly.
The header must be paired with a compatible 7-pole female connector from the appropriate WAGO MCS MIDI system. Matching the pole count and contact pitch alone does not guarantee compatibility; the mating profile, mechanical coding and applicable electrical ratings must also be checked.
The complete assembly must be designed so that accessible male contacts do not remain energised when the mating connector is removed. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 7 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 721-867/001-000 | |
| Series | 721 MCS MIDI | |
| Product category | Industrial PCB connector / pluggable terminal block header | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of contact positions | 7 | |
| Total number of potentials | 7 | |
| Number of levels | 1 | |
| Positions per level | 7 | |
| Contact arrangement | Single-row | |
| Contact pitch | 7.5 mm | |
| Connector orientation | Angled / right-angle | |
| Header orientation | 90° | |
| Mating direction relative to PCB | 0° | |
| PCB mounting technology | Through-hole technology (THT) | |
| Electrical termination | Solder connection | |
| Solder pin arrangement | In-line, across the male header | |
| Solder pins per potential | 1 | |
| Total solder pins | 7 | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder pin length | 3.8 mm | |
| Recommended drilled hole diameter | 1.7 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC, III/3) | 6 kV | |
| Rated impulse voltage (IEC, III/2) | 6 kV | |
| Rated impulse voltage (IEC, II/2) | 6 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Connector construction | Four-sided shrouded male header | |
| Mismating protection | Yes | |
| Mechanical coding | Variable coding supported | |
| Anti-rotation protection | Yes | |
| Plug-in locking mechanism | Without integrated locking | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +100 °C | |
| Connector width | 53.2 mm | |
| Connector height | 15.2 mm | |
| Height above PCB surface | 11.4 mm | |
| Connector depth | 12 mm | |
| Net weight | Approximately 3.24 g | |
| GTIN / EAN | 4044918933506 | |
| PCB mounting application | Through-hole printed circuit board | |
| Connection application | PCB-to-wire connection with a compatible female plug | |
| Connector system | WAGO MULTI CONNECTION SYSTEM MIDI |
The WAGO 721-867/001-000 is a 7-pole angled THT male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control equipment and electronic assemblies.
The connector has 7 poles arranged in a single row with a 7.5 mm contact pitch, providing seven individual electrical contact positions.
The WAGO 721-867/001-000 has a 7.5 mm contact pitch. This distinguishes it from WAGO 721 connector variants that use a 5 mm pitch.
It is an angled, right-angle PCB header with a 90° orientation. Its solder pins are designed for through-hole PCB mounting, allowing the mating connector to approach parallel to the circuit board.
The connector has a 16 A IEC rated current. Under UL 1059, it is rated at 15 A for Use Group B and 10 A for Use Group D. The applicable rating depends on the relevant standard and complete installation.
The connector is rated at 500 V under IEC overvoltage category III and pollution degree 3, 630 V under category III and pollution degree 2, and 1,000 V under category II and pollution degree 2. UL 1059 ratings are 300 V for Use Groups B and D, while UL 1977 specifies 600 V under its applicable conditions.
The WAGO 721-867/001-000 features 1.2 × 1.2 mm square solder pins with a 3.8 mm solder pin length. WAGO specifies a 1.7 mm drilled hole diameter with a +0.1 mm tolerance. The complete PCB footprint should follow the manufacturer's drawing.
No. The 721-867/001-000 is a through-hole soldered PCB header, not a direct wire-entry CAGE CLAMP® connector. A compatible female plug may use spring pressure conductor termination, depending on the selected mating component.
Yes. The connector incorporates mechanical coding features and mismating protection within the correctly configured WAGO MCS MIDI connector system. A compatible mating connector must still be selected.
No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load. The electrical supply should be safely isolated before disconnection, and accessible male contacts must not remain live when unmated.
WAGO MCS MIDI PCB connectors provide dependable pluggable electrical interfaces for industrial electronics, automation systems and control equipment. The WAGO 721-867/001-000 combines a seven-pole arrangement, 7.5 mm contact pitch, 16 A IEC current rating, robust angled through-hole solder pins and mechanical coding features to support efficient PCB assembly and reliable electrical connections in compatible industrial systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.