Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.8925
The WAGO 721-863/001-040 is a three-pole angled through-hole technology (THT) male PCB header from the WAGO MCS MIDI 721 Series, designed to provide dependable pluggable electrical connections in industrial electronics, control panels and automation equipment. Its solder-pin construction provides a secure connection between printed circuit boards and compatible WAGO pluggable connectors.
This connector features 7.5 mm pin spacing, 1.2 × 1.2 mm solder pins and an angled configuration for PCB integration. A preceding protective earth (PE) contact provides a ground connection designed to engage before the other contacts during mating, supporting protective earthing arrangements in appropriately designed electrical equipment.
With a 16 A IEC rated current, a light grey insulating housing and integrated protection against incorrect mating, the WAGO 721-863/001-040 offers a practical solution for industrial PCB connections requiring reliable electrical performance, compact construction and convenient equipment assembly.
WAGO MCS MIDI PCB headers provide a practical connection interface between industrial printed circuit boards and external wiring assemblies. Their pluggable construction allows compatible connectors to be attached and disconnected without repeatedly soldering individual conductors directly to the PCB, helping simplify equipment manufacturing, installation and servicing.
The WAGO 721-863/001-040 combines angled through-hole solder mounting with a preceding protective earth contact. This arrangement is particularly useful in electrical equipment requiring a protective earth connection that engages before the remaining contacts during mating. The PCB layout, protective earthing system and compatible mating connector must be selected in accordance with the equipment's electrical safety requirements.
Its 7.5 mm pin spacing, 16 A IEC current rating and integrated coding features make the connector suitable for industrial electronic assemblies where secure mechanical mounting, electrical reliability and protection against incorrect mating are important design considerations.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI 721 Series | |
| Model | 721-863/001-040 | |
| Product type | THT male PCB header | |
| Connector configuration | Male | |
| Number of rows | 1 | |
| Pin spacing | 7.5 mm | |
| Solder-pin cross-section | 1.2 × 1.2 mm | |
| Connector orientation | Angled | |
| Mounting technology | Through-hole technology (THT) | |
| Termination type | Solder | |
| Protective earth | Preceding PE contact | |
| Rated current | 16 A (IEC) | |
| Rated impulse voltage | 6 kV | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide (PA66) | |
| Flammability class | UL94 V-0 | |
| Colour | Light grey | |
| Width | 23 mm | |
| Height | 11.4 mm | |
| Depth | 12 mm | |
| Recommended PCB hole diameter | 1.7 mm (+0.1 mm) | |
| Weight | Approximately 1.58 g | |
| Standard packaging unit | 200 pieces |
The WAGO 721-863/001-040 is a three-pole angled THT male PCB header designed to connect printed circuit boards to compatible WAGO MCS MIDI pluggable connectors in industrial electrical and automation equipment.
The connector has a 7.5 mm pin spacing and 1.2 × 1.2 mm solder pins. It is designed for through-hole PCB mounting, with a recommended PCB hole diameter of 1.7 mm (+0.1 mm).
The preceding protective earth (PE) contact is designed to establish the protective earth connection before the other electrical contacts engage during mating. This supports protective grounding arrangements when the connector is installed in a suitably designed electrical system.
The connector has an IEC rated current of 16 A, a rated voltage of 630 V under the specified IEC conditions and a rated impulse voltage of 6 kV. The applicable ratings depend on the installation and insulation-coordination requirements.
Yes. The connector incorporates coding features designed to provide protection against mismating when used with compatible, correctly configured WAGO MCS MIDI mating connectors. The correct connector combination and coding arrangement should be checked during equipment design.
WAGO MCS MIDI PCB connectors are engineered for dependable electrical connectivity, efficient equipment assembly and secure PCB integration. Their robust solder-pin construction, pluggable design and protective earth configurations make them suitable for industrial automation, machinery and electrical control applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.