Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.799
The WAGO 721-863/001-000 is a high-quality 3-pole angled through-hole technology (THT) male PCB header, designed to provide reliable pluggable electrical connections in industrial electronics, automation equipment and electrical control systems. Part of the established WAGO 721 MCS MIDI series, this connector features a 7.5 mm contact pitch, 1.2 × 1.2 mm square solder pins and a right-angle configuration for printed circuit board applications.
Featuring three electrical contact positions and a 16 A IEC rated current, the WAGO 721-863/001-000 provides a dependable connection interface between printed circuit boards and compatible detachable wiring connectors. Its angled construction allows the mating connector to approach parallel to the PCB surface, making it particularly suitable for applications where horizontal cable routing, compact enclosure design and convenient connector accessibility are important.
Unlike direct wire-entry plugs fitted with CAGE CLAMP® spring pressure terminals, the WAGO 721-863/001-000 is a solder-mounted PCB header. Its three square metal pins are inserted into a suitable printed circuit board footprint and permanently connected using through-hole soldering. A compatible female connector then provides the detachable interface between the PCB and external wiring.
The connector incorporates mechanical coding fingers and a four-sided shrouded male contact arrangement designed to protect against incorrect mating within the compatible WAGO MCS MIDI connector system. Its light grey polyamide housing, tin-plated electrolytic copper contacts and robust solder pin construction make it a practical choice for industrial equipment manufacturers requiring dependable three-pole PCB connections.
Specification note: The 3-pole arrangement, 7.5 mm pitch, 90° orientation, 1.2 × 1.2 mm solder pins and 16 A IEC current rating are supported by published product information. The 630 V and 6 kV figures are series references; applicable voltage ratings must be checked against the manufacturer's current datasheet and the complete connector assembly. Dimensions are approximate where indicated and should not replace the official PCB mounting drawing.
Industrial electronic equipment requires dependable electrical connections between printed circuit boards and external wiring. The WAGO 721 MCS MIDI series provides a modular connector system that supports detachable electrical interfaces in industrial control, automation and power distribution applications.
The WAGO 721-863/001-000 is designed specifically for through-hole PCB mounting. Its three square solder pins are inserted into a compatible circuit board footprint and soldered to create permanent electrical connections between the PCB and the header contacts.
Once installed, the male header can be connected to a suitable female plug from the compatible WAGO MCS MIDI range. This arrangement allows equipment manufacturers to maintain a permanent PCB connection while providing a detachable interface for field wiring, cable harnesses and modular electrical assemblies.
The 90° angled orientation is especially useful where the mating connector must approach parallel to the circuit board. This can simplify cable routing, improve connector accessibility and help accommodate electrical connections within compact industrial enclosures.
The connector's 7.5 mm contact pitch and 1.2 × 1.2 mm solder pins support its 16 A IEC rated current under the specified conditions. The square solder pin design also contributes to mechanical stability, particularly in compact PCB headers where secure component positioning is important.
Mechanical coding fingers provide protection against incorrect mating when used with properly selected compatible connectors. This is particularly valuable in industrial equipment containing multiple detachable electrical interfaces, where preventing wiring errors is an important design consideration.
The WAGO 721-863/001-000 must be installed using a printed circuit board footprint designed for its 7.5 mm contact pitch, 1.2 × 1.2 mm square solder pins and right-angle orientation.
PCB hole diameters, copper pad dimensions, solder mask clearances and conductor track spacing should follow the manufacturer's recommended footprint and applicable PCB design standards. The overall electrical rating of the assembly must account for PCB copper capacity, insulation distances and the selected mating connector.
During assembly, the header should be correctly seated before soldering. All three solder joints should be inspected for proper wetting, adequate mechanical strength and electrical continuity. The manufacturer's thermal processing requirements should be observed to avoid damaging the insulating housing.
The header must be paired with a compatible 3-pole female connector from the appropriate WAGO MCS MIDI system. Matching the number of poles and contact pitch alone does not guarantee compatibility; the mating profile, mechanical coding and electrical ratings must also be checked.
The complete assembly must be designed so that accessible male contacts do not remain energised when the mating connector is removed. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 721-863/001-000 | |
| Series | 721 MCS MIDI | |
| Product category | Industrial PCB connector / pluggable terminal block header | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of contact positions | 3 | |
| Number of levels | 1 | |
| Positions per level | 3 | |
| Contact arrangement | Single-row | |
| Contact pitch | 7.5 mm | |
| Connector orientation | Angled / right-angle | |
| Header orientation | 90° | |
| PCB mounting technology | Through-hole technology (THT) | |
| Electrical termination | Solder connection | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder tail length | Approximately 3.8 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC) | Up to 1,000 V under applicable insulation coordination conditions | |
| Rated voltage (IEC, III/2) | 630 V, series reference | |
| Rated impulse voltage (IEC, III/2) | 6 kV, series reference | |
| Rated current (UL) | 15 A under applicable approval conditions | |
| Rated voltage (UL) | 600 V under applicable approval conditions | |
| Connector construction | Four-sided shrouded male header | |
| Mismating protection | Mechanical coding system | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +100 °C | |
| Connector width | Approximately 23 mm | |
| Insulation height | 11.4 mm | |
| Connector depth | Approximately 12 mm, series CAD reference | |
| PCB mounting application | Through-hole printed circuit board | |
| Connection application | PCB-to-wire connection with a compatible female plug | |
| Connector system | WAGO MULTI CONNECTION SYSTEM MIDI |
The WAGO 721-863/001-000 is a 3-pole angled THT male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control equipment and electronic assemblies.
The connector has 3 poles arranged in a single row with a 7.5 mm contact pitch, providing three individual electrical contact positions.
The WAGO 721-863/001-000 has a 7.5 mm contact pitch. This distinguishes it from WAGO 721 connector variants that use a 5 mm pitch.
It is an angled, right-angle PCB header with a 90° orientation. Its solder pins are designed for through-hole PCB mounting, allowing the mating connector to approach parallel to the circuit board.
The connector has a 16 A IEC rated current. A 15 A UL current rating is also listed under applicable approval conditions. The applicable current rating depends on the relevant standard and complete installation.
The connector is listed with an IEC voltage rating of up to 1,000 V and a UL voltage rating of 600 V, subject to their respective approval and installation conditions. The complete assembly must meet the applicable insulation coordination requirements.
The WAGO 721-863/001-000 features 1.2 × 1.2 mm square solder pins with an approximate solder tail length of 3.8 mm. The PCB footprint must be designed to accommodate these dimensions.
No. The 721-863/001-000 is a through-hole soldered PCB header, not a direct wire-entry CAGE CLAMP® connector. A compatible female plug may use spring pressure conductor termination, depending on the selected mating component.
Yes. The connector includes mechanical coding fingers and is designed for mismating protection within the correctly configured WAGO MCS MIDI connector system. A compatible mating connector must still be selected.
No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load. The electrical supply should be safely isolated before disconnection, and accessible male contacts must not remain live when unmated.
WAGO MCS MIDI PCB connectors provide dependable pluggable electrical interfaces for industrial electronics, automation systems and control equipment. The WAGO 721-863/001-000 combines a three-pole arrangement, 7.5 mm contact pitch, 16 A IEC current rating, robust angled through-hole solder pins and mechanical coding features to support efficient PCB assembly and reliable electrical connections in compatible industrial systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.