Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.6545
The WAGO 721-862/001-000 is a 2-pole angled through-hole technology (THT) male PCB header designed for reliable pluggable electrical connections in industrial electronics, automation equipment and control systems. Part of the established WAGO 721 MCS MIDI series, this connector combines a 7.5 mm contact pitch, 1.2 × 1.2 mm square solder pins and a right-angle mounting arrangement for printed circuit board applications.
Featuring two electrical contact positions and a 16 A IEC rated current, the WAGO 721-862/001-000 provides a dependable connection interface between printed circuit boards and compatible detachable wiring connectors. Its angled construction allows the mating connector to approach parallel to the PCB surface, making it particularly suitable for applications where horizontal cable routing, compact enclosure design or convenient connector access is required.
Unlike direct wire-entry plugs fitted with spring pressure terminals, the WAGO 721-862/001-000 is a solder-mounted PCB header. Its two square metal pins are inserted into a suitable printed circuit board footprint and permanently connected using through-hole soldering. A compatible female plug then provides the detachable interface between the PCB and the external wiring assembly.
The connector incorporates mechanical coding fingers and a shrouded male contact arrangement designed to provide protection against incorrect mating within the compatible WAGO MCS MIDI connector system. Its light grey polyamide housing, tin-plated electrolytic copper contacts and industrial-grade construction make it a practical choice for equipment manufacturers requiring dependable two-pole PCB connections.
Specification note: The WAGO 721-862/001-000 is a 2-pole angled THT male PCB header with 1.2 × 1.2 mm solder pins and a 16 A IEC current rating. These specifications distinguish it from other WAGO 721 PCB header variants with smaller solder pins or lower current ratings. Electrical ratings depend on the applicable standard, insulation coordination conditions, mating connector and complete PCB assembly.
Industrial electronic equipment requires secure electrical connections between printed circuit boards and external wiring. The WAGO 721 MCS MIDI series provides a modular connector system that supports detachable electrical interfaces in industrial control and automation applications.
The WAGO 721-862/001-000 is designed specifically for through-hole PCB mounting. Its two square solder pins are inserted into a compatible circuit board footprint and soldered to create permanent electrical connections between the PCB and the header contacts.
Once installed, the male header can be connected to a suitable female plug from the compatible WAGO MCS MIDI range. This arrangement allows equipment manufacturers to maintain a permanent PCB connection while providing a detachable interface for field wiring, cable harnesses and modular electrical assemblies.
The 90° angled orientation is especially useful where the mating connector must approach parallel to the circuit board. This can simplify cable routing, improve connector accessibility and help accommodate electrical connections within compact industrial enclosures.
The connector's 7.5 mm contact pitch and 1.2 × 1.2 mm solder pins support its 16 A IEC rated current under the specified conditions. The larger solder pin cross-section also contributes to mechanical stability, particularly in shorter PCB headers.
Mechanical coding fingers provide protection against incorrect mating when used with properly selected compatible connectors. This is particularly valuable in industrial equipment containing multiple detachable electrical interfaces, where preventing wiring errors is an important design consideration.
The WAGO 721-862/001-000 must be installed using a printed circuit board footprint designed for its 7.5 mm contact pitch, 1.2 × 1.2 mm square solder pins and right-angle orientation.
PCB hole diameters, copper pad dimensions, solder mask clearances and conductor track spacing should follow the manufacturer's recommended footprint and applicable PCB design standards. The overall electrical rating of the assembly must account for PCB copper capacity, insulation distances and the selected mating connector.
During assembly, the header should be correctly seated before soldering. Both solder joints should be inspected for proper wetting, adequate mechanical strength and electrical continuity. The manufacturer's thermal processing requirements should be observed to avoid damaging the insulating housing.
The header must be paired with a compatible 2-pole female connector from the appropriate WAGO MCS MIDI system. Matching the number of poles and contact pitch alone does not guarantee compatibility; the mating profile, mechanical coding and electrical ratings must also be checked.
The complete assembly must be designed so that accessible male contacts do not remain energised when the mating connector is removed. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 721-862/001-000 | |
| Series | 721 MCS MIDI | |
| Product category | Industrial PCB connector / pluggable terminal block header | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of contact positions | 2 | |
| Total number of potentials | 2 | |
| Number of levels | 1 | |
| Contact arrangement | Single-row | |
| Contact pitch | 7.5 mm | |
| Connector orientation | Angled / right-angle | |
| Header orientation | 90° | |
| PCB mounting technology | Through-hole technology (THT) | |
| Electrical termination | Solder connection | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder tail length | Approximately 3.8 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC, III/2) | 6 kV | |
| Rated impulse voltage (IEC, II/2) | 6 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Connector construction | Four-sided shrouded male header | |
| Mismating protection | Mechanical coding system | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +100 °C | |
| Connector width | 15.7 mm | |
| Connector height | 15.2 mm | |
| Height above PCB surface | 11.4 mm | |
| Connector depth | 12 mm | |
| PCB mounting application | Through-hole printed circuit board | |
| Connection application | PCB-to-wire connection with a compatible female plug | |
| Connector system | WAGO MULTI CONNECTION SYSTEM MIDI |
The WAGO 721-862/001-000 is a 2-pole angled THT male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control equipment and electronic assemblies.
The connector has 2 poles arranged in a single row with a 7.5 mm contact pitch, providing two individual electrical contact positions.
The WAGO 721-862/001-000 has a 7.5 mm contact pitch. This distinguishes it from WAGO 721 connector variants that use a 5 mm pitch.
It is an angled, right-angle PCB header with a 90° orientation. Its solder pins are designed for through-hole PCB mounting, allowing the mating connector to approach parallel to the circuit board.
The connector has a 16 A IEC rated current. Under UL 1059, it is rated at 15 A for Use Group B and 10 A for Use Group D. The applicable current rating depends on the relevant standard and complete installation.
The connector is rated at 630 V under IEC overvoltage category III and pollution degree 2, and 1,000 V under category II and pollution degree 2. UL 1059 ratings are 300 V for Use Groups B and D, while UL 1977 specifies 600 V under its applicable approval conditions.
The WAGO 721-862/001-000 features 1.2 × 1.2 mm square solder pins with an approximate solder tail length of 3.8 mm. The PCB footprint must be designed to accommodate these dimensions.
No. The 721-862/001-000 is a through-hole soldered PCB header, not a direct wire-entry CAGE CLAMP® connector. A compatible female plug may use spring pressure conductor termination, depending on the selected mating component.
Yes. The connector includes mechanical coding fingers and is designed for mismating protection within the correctly configured WAGO MCS MIDI connector system. A compatible mating connector must still be selected.
No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load. The electrical supply should be safely isolated before disconnection, and accessible male contacts must not remain live when unmated.
WAGO MCS MIDI PCB connectors provide dependable pluggable electrical interfaces for industrial electronics, automation systems and control equipment. The WAGO 721-862/001-000 combines a two-pole arrangement, 7.5 mm contact pitch, 16 A IEC current rating, robust angled through-hole solder pins and mechanical coding features to support efficient PCB assembly and reliable electrical connections in compatible industrial systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.