721-835/001-000 Wago Male Connector, With Angled Solder Pins 5-Pole Light Gray

721-835/001-000 Wago Male Connector, With Angled Solder Pins 5-Pole Light Gray

SKU: 721-835/001-000MPN: 721-835/001-000
Price
List Price £1.32 ex VAT
Your Price (ex VAT) Save 15%
£1.12 15% OFF
You save £0.198 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £1.12
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 100

£1.12

Why Choose the WAGO 721-835/001-000 5-Pole Angled THT Male PCB Header?

The WAGO 721-835/001-000 is a 5-pole angled through-hole technology (THT) male PCB header designed for reliable pluggable electrical connections in industrial electronics, automation equipment and control systems. Part of the established WAGO 721 MCS MIDI connector series, this component features a 7.5 mm contact pitch, 1.0 × 1.0 mm solder pins and an angled connector orientation for printed circuit board applications.

Unlike wire-entry connectors that terminate conductors directly, the WAGO 721-835/001-000 is a PCB-mounted male header. Its solder pins are designed for insertion into a compatible printed circuit board and permanent attachment using through-hole soldering. A suitable female mating connector provides the detachable interface between the PCB and the external wiring assembly.

Featuring five electrical contacts, a 12 A IEC rated current and an IEC rated voltage of up to 1,000 V under the specified insulation coordination conditions, this header offers a practical connection solution for industrial electrical equipment. Its right-angle design allows the mating connector to approach parallel to the PCB surface, making it particularly useful where equipment layout, cable routing or enclosure clearances favour a horizontal connection.

The WAGO 721-835/001-000 also incorporates mechanical coding fingers and protection against mismating within the correctly configured WAGO MCS connector system. Its light grey polyamide housing, tin-plated electrolytic copper contacts and shrouded construction make it a dependable choice for industrial PCB assemblies requiring secure, repeatable electrical connections.

Key Advantages

  • 5-pole male PCB header provides five individual electrical connection positions.
  • 7.5 mm contact pitch supports suitable industrial power and control circuit applications.
  • Angled 90° connector orientation allows horizontal mating relative to the PCB.
  • Through-hole solder termination provides a permanent mechanical and electrical connection to the circuit board.
  • 1.0 × 1.0 mm square solder pins support the specified PCB mounting arrangement.
  • 12 A IEC rated current for compatible electrical assemblies.
  • Mechanical coding fingers help prevent incorrect mating with incompatible connectors.
  • Shrouded male contact arrangement provides a defined mating interface.
  • Light grey PA66 housing provides durable electrical insulation.
  • Tin-plated electrolytic copper contacts support dependable electrical conductivity.
  • Pluggable construction simplifies equipment assembly, servicing and modular wiring.
  • Suitable for automated or conventional through-hole PCB soldering processes.

Key Features

  • WAGO 721 MCS MIDI series industrial PCB connector.
  • 5-pole male header with a single row of five contacts.
  • 7.5 mm pin spacing between adjacent contact positions.
  • Angled solder pins for right-angle PCB mounting.
  • THT mounting technology for through-hole soldered connections.
  • 1.0 × 1.0 mm solder pin cross-section.
  • Approximately 3.8 mm solder tail length.
  • 12 A IEC rated current under the applicable standard conditions.
  • 1,000 V IEC rated voltage under overvoltage category II and pollution degree 2.
  • Mechanical coding fingers provide mismating protection within the compatible connector system.
  • Shrouded male contacts for connection with a suitable female plug.
  • Polyamide 66 insulating housing with UL94 V-0 flammability classification.
  • Tin-plated copper contact surfaces for reliable mating performance.
  • Compact PCB header dimensions of approximately 38.2 × 15.2 × 12 mm.
  • Suitable for industrial PCB assemblies, control electronics and modular electrical equipment.

Specification note: The WAGO 721-835/001-000 is an angled THT male PCB header, not a CAGE CLAMP® wire-entry plug. Its 7.5 mm pitch and 1.0 × 1.0 mm solder pins are important distinctions from other WAGO 721 connector variants. Electrical ratings depend on the applicable standard, insulation coordination conditions, mating connector and complete PCB assembly.

Reliable PCB Connections for Industrial Automation

Industrial electronic equipment depends on dependable electrical interfaces between printed circuit boards and external wiring. The WAGO 721 MCS MIDI series provides a modular connection system designed to support pluggable connections across a range of industrial applications.

The WAGO 721-835/001-000 is designed specifically for through-hole PCB mounting. Its five square solder pins are inserted into a compatible PCB footprint and soldered to create permanent electrical connections between the header and the circuit board.

Once installed, the header can be connected to a suitable female plug from the WAGO MCS MIDI system. This allows equipment manufacturers to separate the permanent PCB connection from the detachable field-wiring interface, helping simplify manufacturing, installation and servicing.

The connector's 90° angled orientation is particularly useful where a horizontal mating direction is preferred. In many equipment designs, this can improve cable routing and provide more convenient access to the connector within the enclosure.

The 7.5 mm pitch provides greater spacing between adjacent contacts than the 5 mm variants within the wider WAGO 721 family. However, the correct electrical rating must always be established from the specific connector and complete assembly rather than from pitch alone.

Mechanical coding fingers help prevent incorrect mating when used with properly selected compatible connectors. This is especially valuable in industrial systems containing multiple detachable electrical connections, where preventing wiring errors is an important design consideration.

Typical Applications

  • Industrial printed circuit board assemblies.
  • PLC interface boards and industrial control electronics.
  • Power supply and power distribution circuit boards.
  • Industrial automation equipment.
  • Machine control modules and OEM electronics.
  • Building automation and lighting control systems.
  • Electronic control cabinets and equipment interfaces.
  • Modular machinery and detachable wiring assemblies.
  • Industrial signal and power connections.
  • PCB-to-wire connection systems using compatible female plugs.
  • Electronic equipment requiring right-angle PCB connectors.
  • Maintenance and replacement of matching WAGO 721-series PCB headers.

PCB Mounting and Installation Considerations

The WAGO 721-835/001-000 must be installed using a PCB footprint suitable for its 7.5 mm pitch, angled orientation and 1.0 × 1.0 mm square solder pins. The PCB hole dimensions, pad geometry, copper layout and mechanical clearances should follow the manufacturer's dimensional drawing and applicable PCB design requirements.

During assembly, the solder pins should be fully seated and soldered using a process appropriate for the PCB materials and component specifications. The solder joints should be inspected for correct wetting, adequate mechanical support and electrical continuity.

The header must be paired with a compatible 5-pole female connector from the appropriate WAGO MCS MIDI system. Matching the pole count and pitch alone does not guarantee compatibility; the mating profile, mechanical coding and electrical ratings must also be checked.

The complete assembly must be designed so that accessible male contacts do not remain live when the mating connector is removed. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load.

Technical Specifications

Tick the specs you need, then view products that match.

Current 12 A
Voltage 630 V
Product Series WAGO 721
Rated surge voltage 6 kV
Number of plug-in contact rows 1
Flammability class of insulation material according to UL 94 V0
Operating temperature -60 – 100 °C
Rated current In 12 A
Material insulation body Thermoplastic
Housing colour Other
Modular spacing contacts 7.5 mm
Angle PCB/contact 0°/180° (horizontal)
Contact type Pin
Type of electric connection Soldering connection
Type of fastening Solder
Type of connection Flexible PCB-connector
Length pin 3.8 mm
Modular spacing connections 7.5 mm
Number of poles 5
Connector model Free connector
Suitable for PCB thickness 1.5 mm
Type of banding None
Rated voltage 630 V
Material of contact surface Tin
Pollution degree 2
Overvoltage category III
Type of PCB fastening Connecting contact
Manufacturer WAGO
Manufacturer part number 721-835/001-000
Series 721 MCS MIDI
Product category PCB connector / pluggable terminal block header
Product type THT male header
Connector gender Male
Number of contacts 5
Total number of potentials 5
Number of contact rows 1
Contact pitch 7.5 mm
Connector orientation Angled / right-angle
Header orientation 90°
PCB mounting technology Through-hole technology (THT)
Electrical termination Solder connection
Solder pin cross-section 1.0 × 1.0 mm
Solder tail length Approximately 3.8 mm
Rated current (IEC) 12 A
Rated voltage (IEC, II/2) 1,000 V
Rated impulse voltage (IEC, II/2) 6 kV
Rated current (UL) 10 A under the applicable approval conditions
Rated voltage (UL) 600 V under the applicable approval conditions
Connector construction Shrouded male header
Mismating protection Mechanical coding system
Insulation material Polyamide 66 (PA66)
Flammability classification UL94 V-0
Contact material Electrolytic copper
Contact surface finish Tin-plated
Temperature limit range −60 to +100 °C
Connector width 38.2 mm
Connector height 15.2 mm
Connector depth 12 mm
Approximate net weight 2.2 g
GTIN / EAN 4044918869966
RoHS compliance RoHS compliant
Connection system WAGO MULTI CONNECTION SYSTEM MIDI
Typical applications Industrial PCB assemblies, automation equipment and modular electrical connections

Frequently Asked Questions

What is the WAGO 721-835/001-000 used for?

The WAGO 721-835/001-000 is a 5-pole angled THT male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control equipment and electronic assemblies.

How many poles does the WAGO 721-835/001-000 have?

The connector has 5 poles arranged in a single row with a 7.5 mm contact pitch.

What is the contact pitch of the WAGO 721-835/001-000?

The WAGO 721-835/001-000 has a 7.5 mm contact pitch. This is an important distinction from other WAGO 721 connectors that use a 5 mm pitch.

Is the WAGO 721-835/001-000 a straight or angled PCB header?

It is an angled, right-angle PCB header with a 90° orientation. Its solder pins are designed for through-hole PCB mounting, allowing the mating connector to approach parallel to the board.

What is the rated current of the WAGO 721-835/001-000?

The connector has a 12 A IEC rated current. A 10 A UL current rating is also listed under applicable approval conditions. The correct rating depends on the relevant standard and complete installation.

What voltage is the WAGO 721-835/001-000 rated for?

The connector has an IEC rated voltage of 1,000 V under overvoltage category II and pollution degree 2. A 600 V UL rating is also listed under applicable approval conditions. The voltage rating must be selected according to the relevant standard and installation requirements.

What size are the solder pins?

The WAGO 721-835/001-000 features 1.0 × 1.0 mm square solder pins with an approximate solder tail length of 3.8 mm. The PCB footprint must be designed to accommodate these dimensions.

Does the WAGO 721-835/001-000 use CAGE CLAMP® terminals?

No. The 721-835/001-000 is a through-hole soldered PCB header, not a direct wire-entry CAGE CLAMP® connector. A compatible female plug may use spring pressure conductor termination, depending on the selected mating component.

Does the WAGO 721-835/001-000 protect against incorrect mating?

Yes. The connector includes mechanical coding fingers and is designed for mismating protection within the correctly configured WAGO MCS MIDI connector system. A compatible mating connector must still be selected.

Can the WAGO 721-835/001-000 be disconnected while powered?

No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load. The electrical supply should be safely isolated before disconnection, and accessible male contacts must not remain live when unmated.

Trusted by Industrial Automation Professionals Worldwide

WAGO MCS MIDI PCB connectors provide dependable pluggable electrical interfaces for industrial electronics, automation systems and control equipment. The WAGO 721-835/001-000 combines a 5-pole arrangement, 7.5 mm contact pitch, angled through-hole solder pins and mechanical coding features to support efficient PCB assembly and reliable connections in compatible industrial electrical systems.