Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.9435
The WAGO 721-834/001-000 is a four-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI 721 Series, designed to provide reliable electrical connections between printed circuit boards and compatible pluggable wiring connectors. Featuring 1.0 × 1.0 mm solder pins and a robust insulating housing, it provides a dependable interface for industrial electronics, control panels and automation equipment.
Designed with a 7.5 mm pin spacing, this connector supports horizontal or vertical PCB mounting arrangements using compatible solder-pin configurations. Its angled 90° construction facilitates horizontal mating, while integrated coding fingers provide 100% protection against incorrect mating with compatible connector components.
With four connection poles, a 12 A IEC rated current and through-hole solder mounting, the WAGO 721-834/001-000 is suitable for industrial electronic assemblies requiring secure and serviceable pluggable connections. Its light grey polyamide housing provides electrical insulation and mechanical support for the contacts.
WAGO MCS MIDI PCB connectors provide a practical solution for connecting printed circuit boards to external electrical wiring in industrial machinery, control cabinets and automation equipment. Their pluggable construction allows compatible wiring assemblies to be connected and disconnected without repeatedly soldering individual conductors directly to the circuit board.
The 721 Series combines robust mechanical construction with reliable electrical contact technology. Through-hole solder mounting provides a secure PCB interface, while the integrated coding system helps prevent incorrect connector combinations during equipment assembly and maintenance.
The WAGO 721-834/001-000 is designed for applications requiring a four-pole PCB connection with an angled mating arrangement. Its 7.5 mm pin spacing and compact construction make it suitable for industrial electronic assemblies where reliable electrical connections and straightforward equipment integration are essential.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Other | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI 721 Series | |
| Model | 721-834/001-000 | |
| Product type | Through-hole male PCB header | |
| Connector configuration | Male | |
| Number of levels | 1 | |
| Pin spacing | 7.5 mm | |
| Pin cross-section | 1.0 × 1.0 mm | |
| Contact orientation | Angled 90° | |
| PCB mounting | Through-hole solder mounting | |
| Termination type | Solder | |
| Solder pin length | 3.8 mm | |
| Recommended PCB hole diameter | 1.4 mm (+0.1 mm) | |
| Rated current | 12 A (IEC) | |
| Rated impulse voltage | 6 kV | |
| UL rated voltage | 600 V AC | |
| UL rated current | 10 A | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability class | UL94 V-0 | |
| Colour | Light grey | |
| Width | 30.7 mm | |
| Height | 15.2 mm | |
| Depth | 12 mm | |
| Height above PCB | 11.4 mm |
The WAGO 721-834/001-000 is a four-pole angled through-hole male PCB header designed to connect printed circuit boards with compatible WAGO MCS MIDI pluggable connectors in industrial equipment and automation systems.
This connector features four poles arranged in a single row with a 7.5 mm pin spacing.
The connector uses through-hole solder mounting with 1.0 × 1.0 mm solder pins. Its angled 90° configuration supports horizontal mating arrangements with compatible connector components.
The connector has an IEC rated current of 12 A. Its rated voltage depends on the applicable overvoltage category and pollution degree, so the correct electrical ratings must be considered during installation.
Yes. The connector incorporates integrated coding fingers and provides 100% protection against mismating when used with compatible, correctly configured WAGO MCS MIDI connector components.
WAGO MCS MIDI connectors are engineered to provide dependable electrical connectivity, straightforward installation and secure PCB integration. Their robust through-hole construction, integrated coding features and reliable contact technology make them suitable for industrial automation, machinery and electrical control applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.