Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£10.05
The WAGO 721-620/018-000 is a 20-pole male pluggable electrical connector with snap-in mounting feet, designed for dependable multi-circuit connections in industrial control panels, automation equipment and machinery. Part of the established WAGO 721 MCS MIDI series, this connector combines proven CAGE CLAMP® spring pressure connection technology with a practical mounting arrangement for secure installation in compatible electrical assemblies.
Featuring 20 connection positions, a 5 mm contact pitch and a 12 A IEC rated current, the WAGO 721-620/018-000 provides a compact interface for connecting multiple electrical circuits. Its spring pressure terminals accommodate solid and fine-stranded conductors from 0.08–2.5 mm², making it suitable for a wide range of industrial wiring requirements.
The integrated snap-in mounting feet distinguish this version from the standard WAGO 721-620 connector. Designed for DIN-35 rail and compatible panel mounting arrangements, the connector supports organised electrical installations while retaining the flexibility of a detachable connection system.
WAGO's mechanical coding system provides 100% protection against mismating when compatible components are correctly selected. Combined with its light grey polyamide housing, tin-plated contacts and reliable spring pressure terminals, the WAGO 721-620/018-000 is a practical choice for modular machinery, industrial automation and equipment requiring dependable 20-pole electrical connections.
Specification note: The electrical ratings are dependent on the applicable approval standard, mating component and installation conditions. The connector's mounting arrangement should be checked against the manufacturer's dimensional drawing before installation. The quoted width is calculated using WAGO's published 721-series dimensional formula for the 20-pole version.
Industrial control systems require secure electrical connections to maintain consistent operation and simplify equipment servicing. The WAGO 721 MCS MIDI series provides a modular approach to electrical wiring, allowing multiple circuits to be connected through compact pluggable interfaces.
The WAGO 721-620/018-000 uses CAGE CLAMP® spring pressure technology to maintain dependable conductor contact without relying on conventional screw tightening. Its spring-operated terminals support solid and fine-stranded conductors, helping simplify cable preparation and electrical assembly in industrial environments.
The connector's 20-pole arrangement provides twenty connection positions within a single-row housing. Its 5 mm contact pitch helps optimise available installation space, making it suitable for equipment requiring numerous electrical connections within one detachable interface.
Unlike the standard free-hanging WAGO 721-620 connector, the 721-620/018-000 features integrated snap-in mounting feet. This mounting configuration supports secure installation in compatible DIN-35 rail and panel arrangements, helping maintain organised connector positioning within machinery and control equipment.
The connector also incorporates WAGO's mechanical coding system, designed to prevent incorrect mating with incompatible components. When correctly configured, this helps reduce connection errors during equipment assembly, maintenance and replacement.
For safe operation, the complete connector assembly must remain within its applicable electrical ratings. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load, and accessible male contacts must not remain live when unmated.
When installing the WAGO 721-620/018-000, select a compatible mating connector from the WAGO 721 MCS MIDI system. The number of poles, contact pitch and mechanical coding arrangement must match the intended connector combination.
Conductors should be prepared using the recommended 8–9 mm stripping length and inserted using a suitable operating tool. Each conductor should be checked for secure retention after termination, and the specified conductor cross-section limits must be observed.
The snap-in mounting feet must be installed in accordance with the manufacturer's mechanical drawing and the requirements of the mounting arrangement. Appropriate mounting dimensions, clearances and connector accessibility should be considered during equipment design.
The electrical supply must be safely isolated before mating or unmating the connector unless the complete assembly is specifically approved for live operation. Exposed male contacts must not remain energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 20 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 721-620/018-000 | |
| Series | 721 MCS MIDI | |
| Product type | 1-conductor male pluggable connector with snap-in mounting feet | |
| Connector gender | Male | |
| Number of connection positions | 20 | |
| Number of levels | 1 | |
| Contact arrangement | Single-row | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation arrangement | Vertical and horizontal access | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, III/3) | 4 kV | |
| Rated current (UL) | 15 A under applicable approval conditions | |
| Rated voltage (UL) | 300 V under applicable UL 1059 conditions; other approval ratings must be checked separately | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule (standard series) | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule (standard series) | 0.25–2.5 mm² | |
| Recommended stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting configuration | Snap-in mounting feet | |
| Mounting applications | DIN-35 rail and compatible panel mounting | |
| Mechanical coding | Coding fingers | |
| Mismating protection | 100% protected against mismating within the correctly configured connector system | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +100 °C | |
| Connector width | 103.2 mm | |
| Connector height | 14.3 mm | |
| Connector depth | 27.5 mm | |
| Connection applications | Wire-to-wire and compatible board-to-wire systems | |
| Connector system | WAGO MULTI CONNECTION SYSTEM MIDI |
The WAGO 721-620/018-000 is a 20-pole male pluggable electrical connector with snap-in mounting feet, designed for multi-circuit connections in industrial control panels, automation equipment, machinery and compatible DIN-35 rail or panel-mounted electrical assemblies.
The connector features 20 poles arranged in a single row with a 5 mm contact pitch, providing twenty individual electrical connection positions.
The connector has a 12 A IEC rated current. A 15 A UL current rating is also listed under applicable approval conditions. The correct rating depends on the relevant standard and the complete installation.
The connector is rated at 320 V under IEC overvoltage category III and pollution degree 3, and 630 V under category II and pollution degree 2. The applicable voltage rating depends on the installation's insulation coordination requirements.
The WAGO 721-620/018-000 accommodates solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. The recommended conductor stripping length is 8–9 mm.
The connector uses CAGE CLAMP® spring pressure technology, allowing conductors to be securely terminated using a suitable operating tool without conventional screw tightening.
The connector features integrated snap-in mounting feet for compatible DIN-35 rail and panel mounting arrangements. The required mounting dimensions and installation details should be checked against WAGO's mechanical drawing.
Both connectors belong to the WAGO 721 MCS MIDI series and feature twenty poles with a 5 mm pitch. The 721-620/018-000 includes snap-in mounting feet, whereas the standard 721-620 does not include this mounting-foot arrangement.
Yes. The WAGO 721 MCS MIDI connector system incorporates mechanical coding fingers and mismating protection to help prevent incompatible connector components from being connected incorrectly. The correct mating component must still be selected.
No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load. The electrical supply should be safely isolated before disconnection, and accessible male contacts must not remain live when unmated.
WAGO 721 MCS MIDI connectors provide dependable multi-pole electrical connections for industrial machinery, automation systems and control equipment. Combining proven CAGE CLAMP® spring pressure technology with compact construction, mechanical coding and practical mounting options, the series supports efficient installation and reliable electrical connectivity in modern industrial systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.