Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.22
The WAGO 721-616/018-000 is a high-quality 16-pole male pluggable electrical connector with snap-in mounting feet, designed for reliable multi-circuit connections in industrial control panels, automation equipment and machinery. Part of the established WAGO 721 MCS MIDI series, this connector combines dependable CAGE CLAMP® spring pressure connection technology with convenient mechanical mounting features.
Featuring 16 poles, a 5 mm contact pitch and a 12 A IEC rated current, the WAGO 721-616/018-000 provides a compact and practical interface for industrial electrical wiring. Its spring pressure terminals accommodate solid and fine-stranded conductors from 0.08–2.5 mm², allowing a range of conductor types to be connected without conventional screw tightening.
The integrated snap-in mounting feet distinguish this version from the standard WAGO 721-616 connector, providing a convenient method of securing the connector in compatible mounting arrangements. Its mechanical coding fingers help protect against incorrect mating, while the pluggable construction supports efficient cable pre-assembly, equipment installation and maintenance.
Specification note: The mounting-foot configuration, 16-pole arrangement, 5 mm pitch and electrical connection details are supported by documentation for this exact WAGO part number. The appropriate current and voltage ratings must be selected according to the applicable approval standard, mating component and installation conditions.
Industrial control systems depend on secure electrical connections to maintain consistent operation. The WAGO 721 MCS MIDI series uses CAGE CLAMP® spring pressure technology to provide dependable conductor contact without relying on conventional screw tightening. This technology supports efficient wiring and helps maintain reliable electrical connections in demanding industrial environments.
The WAGO 721-616/018-000 provides a 16-pole connection interface for equipment requiring multiple electrical circuits to be connected through one detachable assembly. Its 5 mm pitch allows sixteen connections to be arranged compactly, while the integrated snap-in mounting feet help secure the connector in compatible equipment designs.
Its light grey polyamide housing provides durable electrical insulation, while tin-plated electrolytic copper contacts support dependable electrical conductivity. The connector's mechanical coding features help prevent incorrect mating with incompatible components, reducing the risk of assembly errors during equipment installation and maintenance.
The pluggable design also supports efficient cable pre-assembly and modular machinery construction. For safe operation, the correct mating connector must be selected, the complete assembly must remain within its applicable electrical ratings, and the connector must not be connected or disconnected while energised or under load unless specifically approved for that purpose.
When installing the WAGO 721-616/018-000, select a compatible mating connector from the WAGO 721 MCS MIDI system. The number of poles and contact pitch must match, and the mechanical coding arrangement must be suitable for the intended connector combination.
Conductors should be prepared using the recommended 8–9 mm stripping length and inserted using the correct operating tool. The spring clamp should be fully actuated during conductor insertion or removal, and each conductor should be checked for secure retention.
The integrated snap-in feet must be installed in a compatible mounting arrangement according to the manufacturer's mechanical drawing. They should not be assumed to provide direct DIN-rail compatibility without a suitable mounting interface.
The electrical supply should be safely isolated before mating or unmating the connector. WAGO MCS connectors without breaking capacity are not intended to be disconnected while live or under load, and exposed male contacts must not remain energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 16 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 721 MCS MIDI | |
| Manufacturer part number | 721-616/018-000 | |
| Product type | 1-conductor male pluggable connector with snap-in mounting feet | |
| Connector gender | Male | |
| Number of connection points | 16 | |
| Number of levels | 1 | |
| Contact arrangement | Single-row | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation arrangement | Vertical and horizontal access | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, III/3) | 4 kV | |
| Rated current (UL) | 15 A under the applicable UL rating conditions | |
| Rated voltage (UL) | Up to 600 V under the applicable UL rating conditions | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Recommended stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 180° | |
| Mounting configuration | Snap-in mounting feet | |
| Mechanical coding | Coding fingers | |
| Mismating protection | Yes, within the compatible connector system | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +100 °C | |
| Connection applications | Wire-to-wire and compatible board-to-wire systems | |
| GTIN / EAN | 4044918264778 |
The WAGO 721-616/018-000 is a 16-pole male pluggable electrical connector with snap-in mounting feet, designed for multi-circuit connections in industrial control panels, automation equipment, machinery and compatible modular electrical assemblies.
The connector features 16 poles arranged in a single row with a 5 mm contact pitch, providing sixteen individual electrical connection positions.
The connector has a 12 A IEC rated current. A 15 A UL current rating is also listed under applicable approval conditions. The correct rating depends on the relevant standard and complete installation.
The connector is rated at 320 V under IEC overvoltage category III and pollution degree 3, and 630 V under category II and pollution degree 2. The applicable voltage rating must be selected according to the installation's insulation coordination requirements.
The WAGO 721-616/018-000 accommodates solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. The recommended conductor stripping length is 8–9 mm.
The connector uses CAGE CLAMP® spring pressure technology, allowing conductors to be securely terminated with a suitable operating tool without conventional screw tightening.
The connector features integrated snap-in mounting feet designed for compatible mounting arrangements. The required mounting dimensions and interface should be checked against WAGO's mechanical drawing.
Both connectors belong to the WAGO 721 MCS MIDI series and feature sixteen poles with a 5 mm pitch. The 721-616/018-000 includes snap-in mounting feet, whereas the standard 721-616 is supplied without this mounting-foot arrangement.
Yes. The WAGO 721 MCS MIDI connector system incorporates mechanical coding fingers and mismating protection to help prevent incompatible connector components from being connected incorrectly.
No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while energised or under load. The electrical supply should be safely isolated before disconnection, and accessible male contacts must not remain live when unmated.
WAGO 721 MCS MIDI connectors provide dependable multi-pole electrical connections for industrial machinery, automation systems and control equipment. Combining proven CAGE CLAMP® spring pressure technology with compact construction, mechanical coding and practical mounting options, the series supports efficient installation and reliable electrical connectivity in modern industrial systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.