Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.80
The WAGO 721-611 is an 11-pole male pluggable electrical connector from the WAGO MCS MIDI 721 series, designed for dependable connections in industrial control panels, automation equipment, machinery and modular electrical assemblies. Featuring CAGE CLAMP® spring pressure connection technology, it provides secure conductor termination without conventional screw terminals.
With a 5 mm contact pitch, 12 A IEC rated current and support for solid and fine-stranded conductors from 0.08–2.5 mm², the WAGO 721-611 offers a practical solution for connecting multiple circuits through one compact interface. Its tool-operated spring clamps allow convenient conductor installation, while the pluggable design supports efficient equipment assembly and servicing.
The connector incorporates mechanical coding fingers and protection against mismating, helping prevent incorrect connections when used with compatible mating components. Its light grey polyamide housing, tin-plated copper contacts and compact single-row construction make it suitable for demanding industrial wiring applications.
Industrial automation equipment requires dependable electrical connections to maintain consistent operation. The WAGO 721 MCS MIDI connector series uses CAGE CLAMP® spring pressure technology to provide secure conductor contact without conventional screw tightening. The spring clamp design helps maintain consistent contact pressure during normal operation, making it suitable for industrial environments where vibration and temperature changes may occur.
The WAGO 721-611 provides an 11-pole connection interface for applications requiring multiple electrical circuits to be connected through one detachable connector. Its 5 mm pitch supports compact wiring arrangements, while the ability to terminate solid, fine-stranded and suitably ferruled conductors provides flexibility for different equipment wiring requirements.
Mechanical coding and mismating protection help reduce the risk of incorrect connector assembly. The pluggable format supports efficient cable pre-assembly, installation and maintenance when paired with a compatible mating component. The complete connector assembly must remain within its applicable electrical ratings, and the connector should not be mated or disconnected while energised or under load unless expressly approved for that operation.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 11 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 721 MCS MIDI | |
| Manufacturer part number | 721-611 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Number of connection points | 11 | |
| Number of potentials | 11 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Contact arrangement | Single-row | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Contact pitch | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC/EN 60664-1, III/3) | 320 V | |
| Rated voltage (IEC/EN 60664-1, III/2) | 320 V | |
| Rated voltage (IEC/EN 60664-1, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting configuration | Cable-mounted / free-hanging connector | |
| Mismating protection | Yes | |
| Variable mechanical coding | Yes | |
| Anti-rotation protection | Yes | |
| Plug-in connection locking | Without locking mechanism | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel | |
| Width | 58.2 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Weight | Approximately 16.68 g | |
| Temperature limit range | −60 to +100 °C | |
| Connection applications | Wire-to-wire and compatible board-to-wire systems | |
| GTIN / EAN | 4045454829247 |
The WAGO 721-611 is an 11-pole male pluggable electrical connector used to connect multiple circuits in industrial control panels, automation equipment, machinery and modular electrical systems.
The connector has 11 poles and eleven individual conductor connection points, arranged in a single row with a 5 mm contact pitch.
The connector has a 12 A IEC rated current. Its UL 1059 ratings include 15 A for Use Group B and 10 A for Use Group D. The applicable rating depends on the relevant standard and complete installation.
The connector is rated at 320 V under IEC overvoltage category III and pollution degree 3, and 630 V under category II and pollution degree 2. The correct rating must be selected according to the installation's insulation coordination requirements.
The WAGO 721-611 accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The connector uses CAGE CLAMP® spring pressure technology. Conductors are terminated using a suitable operating tool, without the need for conventional screw tightening.
The recommended conductor stripping length for the WAGO 721-611 is 8–9 mm. Conductors should be prepared and inserted according to WAGO's installation instructions.
Yes. The connector incorporates mechanical coding and mismating protection to help prevent incompatible connector components from being connected incorrectly. The correct mating component must be selected for the installation.
The standard WAGO 721-611 is a cable-mounted male connector without an integrated panel-mounting flange. Other variants within the WAGO 721 series are available with snap-in feet or flange mounting arrangements.
The connector must not be connected or disconnected while energised or under load unless the complete assembly is specifically approved for that operation. Electrical power should be safely isolated before disconnecting, and accessible male contacts must not remain live when unmated.
WAGO MCS MIDI 721 series connectors provide dependable pluggable electrical connections for industrial automation, machinery and control equipment. Combining proven CAGE CLAMP® spring pressure technology with compact multi-pole construction, mechanical coding and versatile conductor compatibility, the series supports efficient installation and reliable connectivity in industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.