Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.05
The WAGO 721-609/018-000 is a robust and reliable 9-pole pluggable male electrical connector designed for secure electrical connections in industrial control panels, automation systems and machinery. As part of the established WAGO 721 MCS MIDI connector series, it features proven CAGE CLAMP® spring pressure connection technology for dependable conductor termination without conventional screw connections.
This connector incorporates snap-in mounting feet for DIN-35 rail and panel mounting, providing convenient installation options for industrial electrical assemblies. Its spring pressure connection system maintains consistent contact force on conductors, helping reduce the risk of loose connections caused by vibration and thermal cycling. The pluggable design simplifies equipment assembly, cable pre-assembly and maintenance operations.
Featuring 9 connection poles, a 5 mm contact pitch and a 12 A rated current, the WAGO 721-609/018-000 supports conductor cross-sections from 0.08–2.5 mm². Its light grey insulating housing, integrated mechanical coding and compact dimensions make it suitable for industrial control equipment requiring reliable multi-pole electrical connections.
Industrial electrical installations require secure and consistent connections to maintain reliable operation of machinery and automation equipment. The WAGO 721 MCS MIDI series uses CAGE CLAMP® spring pressure technology to maintain dependable electrical contact without conventional screw tightening. This helps simplify wiring operations while providing reliable conductor retention in environments subject to vibration and temperature changes.
The WAGO 721-609/018-000 is particularly suitable for installations requiring a combination of multi-pole connectivity and flexible mounting options. Its nine connection positions allow multiple electrical circuits to be connected through a single pluggable interface, while the integrated snap-in mounting feet support straightforward installation on DIN-35 rails or suitable mounting panels.
The connector's mechanical coding system helps prevent incorrect mating with incompatible connector components. Its pluggable construction also allows electrical assemblies to be prepared and tested before final equipment installation, supporting efficient production and maintenance workflows. As part of the WAGO MCS system, the connector must be used with compatible mating components and should not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 721 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Other | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 9 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 721 MCS MIDI | |
| Model | 721-609/018-000 | |
| Product type | Pluggable male electrical connector | |
| Connector configuration | 1-conductor male connector | |
| Connector gender | Male | |
| Number of connection points | 9 | |
| Number of potentials | 9 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Contact pitch | 5 mm | |
| Rated current | 12 A | |
| Rated voltage (IEC/EN 60664-1, III/3) | 320 V | |
| Rated voltage (IEC/EN 60664-1, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Recommended stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting type | DIN-35 rail / panel mounting | |
| Mounting mechanism | Snap-in mounting feet | |
| Mismating protection | 100% protected against mismating | |
| Coding system | Mechanical coding fingers | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Insulation material | Polyamide | |
| Flammability classification | UL94 V-0 | |
| Dimensions (H × W × D) | 14.3 × 48.2 × 27.5 mm | |
| Weight | Approx. 13.87 g | |
| Connection applications | Wire-to-wire and compatible board-to-wire systems |
The WAGO 721-609/018-000 is a 9-pole male pluggable connector used to establish secure electrical connections in industrial control panels, automation equipment, machinery and modular electrical systems.
The connector features 9 poles, providing nine individual conductor connection points with a 5 mm contact pitch.
The WAGO 721-609/018-000 has a 12 A rated current. The applicable operating current must remain within the ratings of the complete connector assembly and its installation conditions.
The connector supports solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to approximately 28–12 AWG. Conductors should be prepared according to WAGO's installation requirements.
The connector uses CAGE CLAMP® spring pressure technology, providing secure conductor termination through a tool-operated spring clamp mechanism without conventional screw terminals.
Yes. This variant features snap-in mounting feet designed for DIN-35 rail and suitable panel mounting arrangements, making it convenient for industrial control cabinet installations.
Yes. The WAGO 721 MCS MIDI connector system incorporates mechanical coding fingers and protection against mismating to help prevent incompatible connector assemblies from being connected incorrectly.
No. WAGO MCS connectors without a specified breaking capacity must not be connected or disconnected while live or under load. The electrical supply should be safely isolated before disconnecting the connector.
The connector is commonly installed in industrial control cabinets, DIN-rail-mounted electrical assemblies, automation systems and modular machinery, where reliable pluggable electrical connections simplify installation and maintenance.
WAGO 721 MCS MIDI connectors are designed to provide dependable electrical connections for industrial automation, machinery and control equipment. Combining established CAGE CLAMP® spring pressure technology with compact multi-pole construction, mechanical coding and practical mounting options, the series supports efficient installation and reliable electrical connectivity in modern industrial systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.