Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.33
The WAGO 232-172/047-000 is a 12-pole straight through-hole technology (THT) female header with spacer flange from the WAGO MCS MIDI Classic 232 series. Designed for reliable pluggable electrical connections, this industrial PCB connector combines a 5.08 mm contact pitch, twelve electrical contact positions and a distinctive orange insulating housing for industrial automation, electronic control systems and OEM equipment.
Featuring 0.6 × 1.0 mm solder pins, a straight mating configuration and an integrated spacer flange, the WAGO 232-172/047-000 provides a practical connection interface between printed circuit boards and compatible MCS MIDI Classic mating connectors. The spacer flange supports additional mechanical positioning and mounting arrangements, making this variant particularly useful where connector stability and installation geometry are important.
With a 12 A rated current, a 320 V rated voltage and a 4 kV rated impulse voltage under the manufacturer's specified operating conditions, the WAGO 232-172/047-000 offers dependable performance for industrial control electronics, modular equipment and pluggable PCB connection systems.
The WAGO 232-172/047-000 provides a dependable connection interface for printed circuit board assemblies requiring twelve separate electrical contact positions. Its through-hole solder contacts establish permanent connections to the PCB, while the female mating interface allows compatible connector assemblies to be installed or removed during equipment assembly, servicing and maintenance.
The distinguishing feature of the /047-000 variant is its integrated spacer flange. Compared with the standard WAGO 232-172 straight female header, this version provides an additional mechanical mounting feature for connector positioning and supported installation arrangements. Its overall width of 75.76 mm should be considered when planning the PCB layout, enclosure clearance and mating connector access.
The 5.08 mm pitch, orange housing and integrated coding fingers support organised industrial connector installations. Correct use requires a suitable PCB footprint, reliable soldering and verification of mechanical compatibility and electrical ratings for the complete mating assembly. As the MCS MIDI Classic connector system is not designed for load-breaking operation, connectors must not be mated or unmated while live or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-172/047-000 | |
| Series | MCS MIDI Classic 232 | |
| Product type | THT female header with spacer flange | |
| Connector configuration | Straight female PCB header | |
| Number of electrical contact positions | 12 | |
| Contact arrangement | Single row | |
| Contact pitch | 5.08 mm | |
| Connector gender | Female / socket | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder-pin dimensions | 0.6 × 1.0 mm | |
| Drilled PCB hole diameter | 1.3 mm (+0.1 mm) | |
| Connector orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Rated current | 12 A | |
| Rated impulse voltage | 4 kV | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulating housing material | Polyamide 66 (PA66), MCS MIDI Classic family construction | |
| Temperature limit range | −60 to +85 °C, MCS MIDI Classic family specification | |
| Height above mounting surface | 18.25 mm | |
| Overall width | 75.76 mm | |
| Overall depth | 11.60 mm | |
| Overall weight | Approximately 11.338 g | |
| Connector length reference | L = 12 × 5.08 mm = 60.96 mm | |
| Spacer-flange dimension references | L1 = L + 3 mm; L2 = L + 8.8 mm; L3 = L + 14.8 mm | |
| Connector system | WAGO Multi Connection System | |
| Primary applications | PCB-to-wire and compatible board-to-board connections |
The WAGO 232-172/047-000 is a 12-pole straight THT female header with spacer flange used for pluggable electrical connections in printed circuit board assemblies, industrial automation equipment and electronic control systems.
The connector has twelve poles, providing twelve electrical contact positions arranged in a single row at a 5.08 mm contact pitch.
The integrated spacer flange provides additional mechanical positioning and mounting possibilities for the connector, making it useful for supported PCB interfaces and installations where connector alignment and clearance are important.
The connector has a rated current of 12 A. The permissible operating current also depends on the mating connector, PCB design and installation conditions.
The manufacturer's CAD product data lists a 320 V rated voltage and a 4 kV rated impulse voltage. The applicable operating voltage must be assessed against the relevant installation conditions and complete connector assembly.
THT stands for Through-Hole Technology. The connector's solder pins are inserted through prepared PCB holes and soldered to establish permanent electrical and mechanical connections.
The manufacturer's CAD data specifies a 1.3 mm drilled PCB hole diameter with a +0.1 mm tolerance for the connector's 0.6 × 1.0 mm solder pins.
The manufacturer's CAD data lists an overall width of 75.76 mm, a depth of 11.60 mm and a height above the mounting surface of 18.25 mm. The spacer flange must be included when assessing installation clearance.
The standard WAGO 232-172 is a twelve-pole straight THT female header, while the 232-172/047-000 is a twelve-pole straight THT female header incorporating an additional spacer flange for alternative mechanical mounting and positioning arrangements.
No. WAGO MCS MIDI Classic connectors are not intended for load-breaking operation. The circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide established solutions for modular electrical interconnections in industrial electronics and automation systems. The WAGO 232-172/047-000 combines twelve-pole connectivity, 5.08 mm contact spacing, through-hole solder termination and an integrated spacer flange to support dependable PCB connections and flexible mounting arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.