Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.13
The WAGO 232-154 is a high-quality 24-pole straight female through-hole PCB header designed for reliable, detachable electrical connections in industrial automation, control electronics and machine building applications. As part of the WAGO MCS MIDI Classic 232 Series, this connector provides a dependable interface between printed circuit boards and compatible pluggable connectors.
Featuring a 5 mm contact pitch and 0.6 × 1 mm rectangular solder pins, the WAGO 232-154 is designed for direct PCB installation using through-hole soldering technology. Its straight connector configuration provides a 90° mating direction relative to the PCB, while the 24-position arrangement enables multiple electrical circuits to be connected through one modular interface.
With an IEC rated current of 12 A and a rated voltage of up to 630 V under IEC overvoltage category II, pollution degree 2 conditions, the WAGO 232-154 is suitable for industrial electronic equipment requiring dependable pluggable connections. Its grey polyamide housing, tin-plated copper alloy contacts and integrated coding fingers support reliable electrical performance, connector identification and straightforward equipment maintenance.
The WAGO MCS MIDI Classic connector system provides dependable pluggable electrical interfaces for industrial electronics, automation equipment and control systems. The WAGO 232-154 uses through-hole soldering technology to establish a permanent electrical connection between its contact pins and the printed circuit board, while its female socket interface allows compatible mating connectors to be attached and removed for installation or servicing.
The 24-pole straight female header is particularly suitable for electronic equipment requiring numerous electrical connections within a single modular interface. Its 5 mm contact pitch provides consistent spacing across all 24 positions, while the tin-plated copper alloy contacts support reliable conductivity. Integrated coding fingers help identify compatible connector arrangements, reducing the likelihood of incorrect connections when suitable coding configurations are used.
Unlike cable-mounted pluggable connectors incorporating spring-clamp conductor terminals, the WAGO 232-154 uses solder pins for direct PCB installation. Compatible cable-mounted connectors can provide conductor termination on the mating side, allowing wiring assemblies to be prepared separately before final equipment installation. This modular approach supports efficient production, testing, maintenance and equipment replacement.
The WAGO 232-154 is part of a connector system without load-breaking capacity. It must not be connected or disconnected while energised or under load. Electrical ratings and connector compatibility should always be checked against the complete assembly and applicable installation standards.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 24 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 232 Series | |
| Model | 232-154 | |
| GTIN | 4044918623674 | |
| Product type | Straight female through-hole PCB header | |
| Connector gender | Female | |
| Number of contact positions | 24 | |
| Number of potentials | 24 | |
| Number of contact rows | 1 | |
| Contact pitch | 5 mm | |
| Termination technology | Through-hole soldering (THT) | |
| Solder pin dimensions | 0.6 × 1 mm | |
| Solder pin length | 5 mm | |
| PCB drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Mounting type | PCB through-hole mounting | |
| Header orientation | Straight | |
| Mating direction relative to PCB | 90° | |
| PCB solder pin arrangement | In-line | |
| Solder pins per potential | 1 | |
| Plug-in connection locking | Without locking mechanism | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +85 °C | |
| Width | 121.5 mm | |
| Height | 23.25 mm | |
| Height from mounting surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Weight | approx. 22.16 g | |
| Country of origin | Germany |
The WAGO 232-154 is a 24-pole straight female through-hole PCB header used to create detachable electrical connections between printed circuit boards and compatible pluggable connectors in industrial automation, control systems and electronic equipment.
The connector provides 24 independent electrical contact positions arranged in a single row with a 5 mm contact pitch.
The connector is designed for through-hole PCB mounting using straight 0.6 × 1 mm solder pins with a length of 5 mm. The pins are inserted into suitable PCB holes and soldered to establish secure electrical and mechanical connections.
The WAGO 232-154 has an IEC rated current of 12 A and a rated voltage of up to 630 V under IEC overvoltage category II, pollution degree 2 conditions. Its UL 1059 Use Group B ratings are 15 A and 300 V.
The connector features a 5 mm contact pitch, providing consistent spacing between adjacent electrical contact positions for compatible PCB layouts and mating connectors.
No. The WAGO 232-154 is a through-hole PCB header with solder termination. It does not directly accept electrical conductors through CAGE CLAMP® terminals, although compatible mating connectors within the WAGO MCS MIDI Classic system may incorporate spring-clamp conductor connections.
No. The standard WAGO 232-154 has an unlatched plug-in connection without a dedicated locking mechanism. It does, however, feature coding fingers to support correct connector identification and mating arrangements.
The specified drilled hole diameter is 1.3 mm with a +0.1 mm tolerance. PCB designers should follow the manufacturer's recommended footprint and soldering requirements.
No. The connector is not designed for making or breaking electrical connections under load. The electrical circuit must be safely isolated before mating or disconnecting the connector.
The WAGO 232-154 is a 24-pole straight female through-hole PCB header with a 90° mating direction relative to the PCB, whereas the 232-154/031-000 is an angled female header variant with a different PCB mating orientation. Both belong to the WAGO MCS MIDI Classic 232 Series and use a 5 mm contact pitch.
WAGO MCS MIDI Classic connectors are widely used by electrical engineers, PCB designers, control panel builders and industrial equipment manufacturers for dependable modular electrical connections. The WAGO 232-154 combines 24-pole connectivity, a compact 5 mm pitch, durable through-hole solder termination and integrated coding features to support reliable PCB connections in industrial electronics and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.