Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.85
The WAGO 232-141 is an 11-pole straight female PCB connector from the WAGO MCS MIDI Classic 232 Series. Designed for through-hole technology (THT) mounting, this connector provides a reliable, pluggable electrical interface for printed circuit boards used in industrial automation, control equipment and electronic assemblies.
Featuring a 5 mm contact pitch, 0.6 × 1 mm solder pins and a 12 A IEC rated current, the WAGO 232-141 accommodates eleven independent electrical connections in a single-row configuration. Its vertical mounting orientation and straight solder pins allow direct integration into compatible PCB layouts, while the female socket interface supports detachable connections with suitable mating components.
The connector incorporates tin-plated copper alloy contacts and a grey polyamide 66 (PA66) insulating housing. With IEC voltage ratings of up to 630 V under the specified insulation coordination conditions, integrated coding features and a UL94 V-0 flammability classification, the WAGO 232-141 offers a practical solution for compact industrial electronic connection systems.
Technical note: IEC ratings vary according to overvoltage category and pollution degree. UL and CSA ratings also depend on the applicable use group. The WAGO 232-141 is a PCB-mounted female connector with solder terminations, not a direct wire-entry terminal block. Mating compatibility must be verified against the selected connector and PCB design.
The WAGO 232-141 provides a compact eleven-pole female interface for industrial printed circuit board assemblies. Its through-hole solder connections establish the permanent PCB-side electrical interface, while the female contacts allow compatible external connector assemblies to be connected or removed as required.
The 5 mm pitch and single-row configuration support organised circuit board layouts. Integrated coding fingers help engineers configure the connection system to reduce incorrect mating, while the straight connector orientation provides an accessible interface for suitable board-to-wire or board-to-board connection arrangements.
The combination of tin-plated copper alloy contacts, a PA66 insulating housing and UL94 V-0 flame-retardant construction supports dependable operation within the specified electrical and environmental limits. Correct soldering, PCB footprint design and mating connector selection are essential. The connector must not be used for load-breaking operations unless the complete assembly is specifically approved for that purpose.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 11 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-141 | |
| Product family | MCS MIDI Classic | |
| Series | 232 | |
| Product type | THT female PCB connector / header | |
| Connector gender | Female / socket | |
| Connector orientation | Straight / vertical | |
| Mounting type | PCB through-hole mounting | |
| Termination method | Solder | |
| Total number of potentials | 11 | |
| Number of levels | 1 | |
| Contact arrangement | Single row | |
| Nominal pin spacing | 5 mm | |
| Solder pin dimensions | 0.6 × 1 mm | |
| Solder pin length | 5 mm | |
| Recommended drilled hole diameter | 1.3 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage (IEC, III/3) | 4 kV | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated impulse voltage (IEC, III/2) | 4 kV | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated voltage (UL, Use Group B) | 300 V | |
| Rated current (UL, Use Group B) | 15 A | |
| Rated voltage (UL, Use Group D) | 300 V | |
| Rated current (UL, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Width | 56.5 mm | |
| Height | 23.25 mm | |
| Height from mounting surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918578509 | |
| Standard packaging quantity | 25 pieces | |
| Manufacturer product reference | WAGO 232-141 | |
| Technical datasheet | WAGO 232-141 Manufacturer Datasheet |
The WAGO 232-141 is an eleven-pole straight female PCB connector designed for through-hole solder mounting and detachable electrical connections with compatible mating components.
The connector has 11 poles, providing eleven independent electrical potentials in a single-row arrangement.
The connector has a nominal 5 mm contact pitch and uses 0.6 × 1 mm solder pins.
The WAGO 232-141 uses through-hole technology (THT) with straight solder pins for vertical mounting on a compatible printed circuit board.
The connector has an IEC rated current of 12 A. Its UL ratings are 15 A for Use Group B and 10 A for Use Group D, subject to the applicable approval conditions.
The connector is rated at 320 V IEC under category III/3 and III/2 and 630 V IEC under category II/2. Its UL voltage rating is 300 V for Use Groups B and D.
The connector measures 56.5 mm wide, 23.25 mm high and 11.6 mm deep, with a height of 18.25 mm above the mounting surface.
The manufacturer specifies a drilled hole diameter of 1.3 mm with a +0.1 mm tolerance for the solder pins.
No. The WAGO 232-141 is a female PCB connector with through-hole solder terminations. Wires must be connected through a suitable mating connector or other approved connection arrangement.
The 232-141 is a straight THT female PCB connector with solder pins, whereas the 232-141/005-000 is a female connector variant intended for compatible rail-mount terminal block connections. They have different installation interfaces and should not be treated as interchangeable.
No load-breaking capability should be assumed. Isolate the electrical supply before connecting or disconnecting the mating assembly unless the complete connector system is expressly approved for load-breaking operation.
WAGO MCS MIDI Classic PCB connectors provide compact, modular electrical interfaces for industrial automation, electronic control equipment and OEM assemblies. The 232-141 combines eleven female contacts, a 5 mm pitch, straight through-hole solder terminations and flame-retardant construction for compatible industrial PCB connection systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.