Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.66
The WAGO 232-140/031-000 is a high-quality 10-pole through-hole technology (THT) female header with mounting flange, designed for reliable pluggable electrical connections in industrial automation, printed circuit board assemblies and electronic control equipment. Part of the WAGO MCS MIDI Classic 232 series, this connector combines a 5 mm contact pitch, straight solder pins and a mechanically supported mounting arrangement.
Featuring 0.6 × 1.0 mm solder pins and ten independent electrical contact positions, the WAGO 232-140/031-000 provides an organised interface for multiple power and control circuits. Its integrated mounting flange supports panel mounting and feed-through mounting, making it particularly useful for equipment requiring a mechanically secured PCB connector interface.
With an IEC rated current of 12 A, an IEC voltage rating of up to 630 V under specified installation conditions, and a durable grey polyamide housing, the WAGO 232-140/031-000 offers dependable performance for industrial electronics, control cabinets and OEM equipment.
The WAGO 232-140/031-000 combines through-hole solder termination with a mechanically supported pluggable connector interface. Its ten solder contacts establish permanent electrical connections to the printed circuit board, while the female mating interface allows compatible connectors to be attached or removed when the equipment is safely isolated.
The connector's integrated mounting flange is especially useful where the connection must be supported by a panel or enclosure rather than relying solely on PCB solder joints. Its retention features also help maintain a secure connection with suitable mating components, making it a practical choice for industrial control equipment and modular electronic assemblies.
With a 5 mm pitch, durable PA66 insulation and tin-plated copper-alloy contacts, the WAGO 232-140/031-000 supports organised and serviceable electrical installations. Correct selection should account for the complete connector assembly's electrical ratings, PCB footprint, mounting clearances and mating compatibility. The connector is not intended for load-breaking operation and must not be connected or disconnected under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-140/031-000 | |
| Series | MCS MIDI Classic 232 | |
| Product type | THT female header with mounting flange | |
| Connector configuration | Straight female PCB header | |
| Number of electrical potentials | 10 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5 mm | |
| Connector gender | Female / socket | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder-pin dimensions | 0.6 × 1.0 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Header orientation | Vertical / straight | |
| Mating direction relative to PCB | 90° | |
| Mounting arrangement | Mounting flange | |
| Supported mounting methods | Panel mounting and feed-through mounting | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Insulation height | Approximately 18.26 mm | |
| Weight | Approximately 9.846 g | |
| Fire load | 0.18 MJ | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918623421 | |
| Product group | Multi Connection System |
The WAGO 232-140/031-000 is a 10-pole THT female header with mounting flange, used for pluggable electrical connections in industrial PCB assemblies, control equipment and panel-mounted installations.
The connector has ten poles, providing ten independent electrical contact positions arranged at a 5 mm contact pitch.
The /031-000 variant features a mounting flange that supports panel mounting and feed-through installation. This provides additional mechanical mounting flexibility compared with a standard PCB header.
The connector has an IEC rated current of 12 A and a UL current rating of 15 A under the applicable approval conditions. The complete connection assembly must be evaluated against its operating requirements.
The connector has an IEC voltage rating of 630 V under overvoltage category II, pollution degree 2, and a listed UL voltage rating of 600 V. The applicable rating depends on the installation and approval conditions.
THT stands for Through-Hole Technology. The connector's solder pins are inserted through prepared holes in a printed circuit board and soldered to establish electrical and mechanical connections.
No. This component uses through-hole solder termination for its PCB connection. Compatible wire-termination connectors within the WAGO MCS MIDI Classic system may use CAGE CLAMP® technology, but the female header itself is soldered.
Both are ten-pole female headers from the WAGO MCS MIDI Classic 232 series. The 232-140/031-000 includes a mounting flange for panel and feed-through applications, whereas the standard 232-140 is a straight PCB-mounted female header without the same flange configuration.
No. The WAGO MCS MIDI Classic connector system is not designed for load-breaking operation. The circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide established solutions for dependable modular electrical connections in industrial electronics and automation systems. The WAGO 232-140/031-000 combines ten-pole connectivity, 5 mm contact spacing, through-hole solder termination and an integrated mounting flange to support reliable PCB connections and mechanically secured panel-mounted interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.