Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.20
The WAGO 232-136 is a 6-pole straight through-hole (THT) female PCB header from the WAGO MCS MIDI Classic 232 Series. Featuring a 5 mm contact pitch, 0.6 × 1.0 mm solder pins and a grey insulating housing, this connector provides a practical pluggable interface for industrial electronic equipment and printed circuit board assemblies.
Designed for board-to-board and board-to-wire electrical connections, the WAGO 232-136 allows a compatible mating connector to interface with six separate electrical contact positions on a PCB. Its through-hole solder termination provides a permanent connection to the circuit board while maintaining a detachable interface on the mating side.
With an IEC rated current of 12 A and a 630 V IEC voltage rating under overvoltage category II, pollution degree 2 conditions, the connector is suitable for appropriately designed industrial control systems, automation equipment and electronic assemblies.
The WAGO 232-136 is particularly useful for OEM equipment manufacturers, electrical engineers and maintenance professionals requiring a compact, reliable and precisely identified six-way PCB connection component.
Technical selection note: The 630 V IEC rating applies to overvoltage category II, pollution degree 2 conditions. The permissible voltage and current depend on the applicable standards, operating conditions and ratings of the complete mating assembly. Confirm the latest WAGO technical documentation before finalising an electrical design.
The WAGO 232-136 uses through-hole technology (THT), with solder pins designed to pass through corresponding holes in a printed circuit board.
During PCB assembly, the connector is positioned in its designated footprint and soldered to the board. This creates a fixed electrical interface between the circuit board and the female connector contacts.
Through-hole connector mounting is widely used in industrial electronic equipment where components require a defined mechanical attachment to the PCB.
The connector features 0.6 × 1.0 mm solder pins, so PCB hole sizes, solder pads and component positioning must follow the manufacturer's recommended layout.
Unlike conductor-mounted plugs, the WAGO 232-136 does not provide direct spring-pressure conductor termination. Its electrical connection to the PCB is established through soldered contacts.
The WAGO 232-136 provides six separate electrical contact positions within a compact single-row housing.
With a 5 mm contact pitch, the connector supports a space-efficient arrangement of multiple electrical connections while maintaining the contact spacing specified for the WAGO MCS MIDI Classic system.
The straight connector configuration provides a defined mating direction for compatible connectors. Its female contacts form the detachable interface, while the solder pins provide the permanent PCB connection.
The connector's grey insulating housing helps maintain contact alignment and provides electrical separation between the conductive components.
The WAGO 232-136 is designed for board-to-board and board-to-wire connection systems.
In board-to-board applications, a compatible mating connector can establish an electrical interface between separate PCB assemblies. This can support modular equipment design and simplify servicing where removable electronic modules are required.
In board-to-wire applications, a suitable cable-mounted mating connector allows field wiring or internal equipment wiring to connect to the PCB-mounted female header.
Both arrangements require careful selection of the mating connector, including its pole count, contact pitch, mechanical geometry and electrical ratings.
The WAGO 232 Series female PCB headers are designed with recessed female contacts that support touch-protected PCB connection arrangements.
This can be beneficial in modular electronic equipment where connectors may be separated during assembly or maintenance.
However, touch protection does not remove the need for electrical isolation. Equipment designers must ensure that accessible contacts cannot present an electrical hazard when connectors are unmated.
Important safety requirement: WAGO MCS connectors do not have breaking capacity under DIN EN 61984. They must not be connected or disconnected while live or under load.
The WAGO 232-136 must be paired with a compatible 6-pole mating connector designed for the WAGO MCS MIDI Classic connection system.
Before selecting the mating component, confirm:
The standard WAGO 232-136 is specified without additional plug-in locking. Applications requiring a locking lever should be assessed using the appropriate locking variant rather than assuming that the standard connector provides the same retention arrangement.
The WAGO 232 Series includes several connectors with similar base part numbers but different mounting and locking configurations.
These variants should not be treated as interchangeable without checking their mounting arrangements, mechanical dimensions and mating requirements.
Before installing the WAGO 232-136, confirm that the PCB footprint matches the connector's solder pin dimensions and that the selected mating component is compatible.
The connector should be mounted using an appropriate through-hole soldering process. Correct component alignment, solder joint quality and mating clearance should be verified during PCB assembly.
Ensure that the complete connector assembly is suitable for the intended current, voltage and environmental conditions.
When replacing an existing component, match the exact WAGO 232-136 part number. Avoid substituting a related connector with a different suffix unless the equipment design explicitly permits it.
Electrical safety: The connector must not be connected or disconnected while live or under load. Safely isolate the circuit before mating, separating or servicing the connector.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-136 | |
| Series | MCS MIDI Classic / 232 Series | |
| Product type | THT female PCB header | |
| Connector gender | Female / socket | |
| Number of contact positions | 6 | |
| Number of electrical potentials | 6 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Connector orientation | Straight | |
| Mounting method | Through-hole PCB mounting | |
| Termination method | Solder | |
| Solder pin dimensions | 0.6 × 1.0 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 300 V | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | -60°C to +85°C | |
| Width | 31.5 mm | |
| Height | 23.25 mm | |
| Depth | 11.6 mm | |
| Dimensions (W × H × D) | 31.5 × 23.25 × 11.6 mm | |
| Approximate weight | 5.59 g | |
| Plug-in connection locking | None | |
| Coding fingers | Yes | |
| GTIN / EAN | 4044918578363 | |
| Standard packaging unit | 50 pieces |
The WAGO 232-136 is a 6-pole straight THT female PCB header from the WAGO MCS MIDI Classic 232 Series. It features a 5 mm contact pitch, 0.6 × 1.0 mm solder pins and a grey housing.
The connector has six poles, providing six separate electrical contact positions.
The connector has a 5 mm contact pitch.
Yes. It is a through-hole PCB-mounted female header designed for soldering directly into a printed circuit board.
The WAGO 232-136 features 0.6 × 1.0 mm solder pins.
The connector has an IEC rated current of 12 A. A 15 A rating is also published under UL requirements, subject to the applicable standard and installation conditions.
The connector has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. Its published UL voltage rating is 300 V.
No. The WAGO 232-136 is a PCB header using through-hole solder termination. CAGE CLAMP® technology may be used by compatible conductor-mounted components elsewhere in the connection system.
The connector has a grey polyamide 66 insulating housing.
The connector measures approximately 31.5 mm wide, 23.25 mm high and 11.6 mm deep.
The WAGO 232-136 is a THT female PCB header, while 232-136/005-000 is a female connector with extended pins designed for compatible rail-mount terminal blocks. They are not direct substitutes.
No. WAGO MCS connectors are specified without breaking capacity under DIN EN 61984 and must not be connected or disconnected while live or under load.
The WAGO 232-136 combines a six-pole contact arrangement, 5 mm pitch and through-hole solder mounting in a compact female PCB header. Its modular design, defined electrical ratings and compatibility with suitable mating connectors make it a practical choice for industrial electronics, automation equipment and PCB-based control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.