Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.20
The WAGO 232-136/045-000 is a 6-pole, straight through-hole technology (THT) female header from the WAGO MCS MIDI Classic 232 series. Designed for pluggable electrical interconnections, this connector provides a practical interface for industrial electronic equipment, printed circuit board assemblies and modular control systems.
Featuring a 5 mm contact pitch and six electrical contact positions, the WAGO 232-136/045-000 supports organised multi-circuit connections. Its solder-pin construction is suited to PCB assembly processes, while its female mating interface allows connection to a mechanically compatible component from the MCS MIDI Classic system.
The 232-series female header family offers 12 A IEC rated current, voltage ratings up to 630 V under specified IEC conditions, and durable polyamide insulation. The WAGO 232-136/045-000 is therefore a useful option for equipment manufacturers and engineers seeking a compact, detachable electrical connection system. Exact mechanical details associated with the /045-000 variant should be checked against its manufacturer drawing before finalising a PCB footprint or enclosure design.
The WAGO 232-136/045-000 provides a practical connection interface for industrial PCB assemblies. Through-hole solder termination creates a permanent electrical connection between the header and the circuit board, while the pluggable mating interface enables modular wiring and equipment integration.
Its six-position arrangement is useful in applications where several electrical circuits must be connected through a single interface. The 5 mm pitch supports a consistent contact layout, and the MCS MIDI Classic system allows designers to select suitable mating components according to their wiring and mechanical requirements.
Correct installation requires consideration of the PCB footprint, soldering process, connector mating geometry and electrical ratings of the complete assembly. The /045-000 suffix identifies a specific manufacturer variant, so mechanical interchangeability with other 232-136 versions should not be assumed. Like other MCS connectors without load-breaking capability, this component must not be connected or disconnected while live or under load.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 232-136/045-000 |
| Series | MCS MIDI Classic 232 |
| Product type | THT female header / pluggable PCB connector |
| Connector gender | Female / socket |
| Number of poles | 6 |
| Contact arrangement | Single row |
| Contact pitch | 5 mm |
| PCB connection technology | Through-hole technology (THT) |
| Termination method | Solder |
| Solder-pin orientation | Straight |
| Standard series solder-pin cross-section | 0.6 × 1.0 mm |
| Standard series solder-pin length | 5 mm |
| Standard series drilled hole diameter | 1.3 mm (+0.1 mm) |
| Rated current (IEC, standard series) | 12 A |
| Rated voltage (IEC, III/3, standard series) | 320 V |
| Rated voltage (IEC, III/2, standard series) | 320 V |
| Rated voltage (IEC, II/2, standard series) | 630 V |
| Rated impulse voltage (standard series) | 4 kV |
| Contact material (standard series) | Copper alloy |
| Contact plating (standard series) | Tin |
| Insulating material (standard series) | Polyamide 66 (PA66) |
| Flammability classification (standard series) | UL 94 V-0 |
| Temperature limit range (standard series) | −60 to +85 °C |
| Connector system | WAGO MCS MIDI Classic |
| Application | Pluggable PCB electrical connections |
| Variant-specific mechanical dimensions | Refer to the manufacturer drawing for 232-136/045-000 |
The WAGO 232-136/045-000 is a 6-pole THT female header used for pluggable electrical connections in industrial PCB assemblies, automation equipment and electronic control systems.
The connector provides six poles arranged at a 5 mm contact pitch, allowing six electrical connection positions within a single connector assembly.
THT stands for Through-Hole Technology. The connector uses solder pins that pass through prepared holes in a printed circuit board and are soldered to establish electrical and mechanical connections.
The standard WAGO 232-series female header design has an IEC rated current of 12 A. The complete connector assembly must be evaluated against the applicable operating conditions and mating component ratings.
The standard series has IEC rated voltages of 320 V under overvoltage category III and 630 V under overvoltage category II, pollution degree 2. The appropriate rating depends on the electrical installation conditions.
Both belong to the WAGO 232-series six-pole female header family. The /045-000 suffix identifies a specific product variant. Its precise mechanical configuration should be confirmed using the manufacturer drawing rather than assuming it is identical to the unsuffixed 232-136.
No. This component uses through-hole solder termination for its PCB connection. Compatible wire-termination connectors in the WAGO MCS MIDI Classic family may use CAGE CLAMP® technology, but the female header itself is soldered.
It is designed for use within the WAGO MCS MIDI Classic connector system. Mating compatibility must be checked for the correct pole count, contact pitch, geometry and any variant-specific mechanical features.
No. WAGO MCS MIDI Classic connectors are not intended to provide load-breaking capability. The circuit must be safely isolated before connecting or disconnecting the mating components.
WAGO MCS MIDI Classic connectors provide established solutions for modular electrical interconnections in industrial electronics and automation equipment. The WAGO 232-136/045-000 combines six-pole connectivity, a 5 mm contact pitch and through-hole solder termination to support organised PCB connections and serviceable electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.