Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.35
The WAGO 232-136/031-000 is a robust 6-pole, straight through-hole technology (THT) female header with mounting flange, designed for dependable pluggable electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. Part of the WAGO MCS MIDI Classic 232 series, this connector features a 5 mm contact pitch, tin-plated copper-alloy contacts and a durable grey polyamide housing.
Unlike standard PCB headers, the 232-136/031-000 incorporates a mounting flange suitable for feed-through and panel-mounting arrangements. This provides additional installation flexibility when creating detachable electrical interfaces between printed circuit boards, control enclosures and compatible mating connectors. Its six independent electrical potentials support organised multi-circuit connections within industrial equipment.
With an IEC rated current of 12 A, rated voltages of 320 V under overvoltage category III and 630 V under overvoltage category II, and a 4 kV rated impulse withstand voltage, the WAGO 232-136/031-000 offers a versatile connection solution for panel builders, electronic designers and OEM manufacturers.
The WAGO 232-136/031-000 combines through-hole solder termination with a mechanically supported pluggable connector interface. Its six solder pins establish permanent electrical connections to the PCB, while the mounting flange provides an additional installation option for equipment requiring panel or feed-through connections.
The connector's 5 mm pitch and straight mating arrangement help designers create consistent multi-circuit interfaces. Anti-rotation protection contributes to stable mechanical positioning, while variable coding allows appropriately configured mating components to be distinguished in installations containing multiple similar connectors.
Manufactured with a PA66 insulating housing and tin-plated copper-alloy contacts, the connector is suitable for industrial electronic assemblies requiring dependable electrical interconnections. Correct installation must account for PCB layout, solder joint quality, mounting hardware, mating compatibility and the electrical ratings of the complete connection system. The connector is not designed for load-breaking operation and should only be mated or unmated after the circuit has been safely isolated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-136/031-000 | |
| Series | MCS MIDI Classic 232 | |
| Product type | THT female header with mounting flange | |
| Connector configuration | Straight, single-row female connector | |
| Number of electrical potentials | 6 | |
| Number of levels | 1 | |
| Number of solder pins per potential | 1 | |
| Contact pitch | 5 mm | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Solder pin dimensions | 0.6 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Drilled hole diameter | 1.3 mm (+0.1 mm) | |
| Solder pin arrangement | In-line | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Mounting arrangement | Mounting flange, feed-through mounting and panel mounting | |
| Anti-rotation protection | Yes | |
| Variable coding | Yes | |
| Mismating protection | No | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 44.8 mm | |
| Height | 23.25 mm | |
| Height above mounting surface | 18.25 mm | |
| Depth | 11.6 mm | |
| Weight | Approximately 6.166 g | |
| Fire load | 0.116 MJ | |
| GTIN / EAN | 4044918623308 |
The WAGO 232-136/031-000 is a 6-pole straight THT female header with mounting flange, used to create pluggable electrical interfaces in printed circuit board assemblies, industrial control equipment and panel-mounted installations.
The connector has six poles, providing six independent electrical potentials arranged at a 5 mm contact pitch.
The connector has an IEC rated current of 12 A. Its rated voltage is 320 V under overvoltage category III and 630 V under overvoltage category II, pollution degree 2.
The 232-136/031-000 features a mounting flange that supports feed-through and panel-mounting arrangements. This distinguishes it from standard versions without the same mounting configuration.
THT means Through-Hole Technology. The connector's solder pins are inserted into correctly sized holes in a printed circuit board and soldered to establish electrical and mechanical connections.
The WAGO 232-136/031-000 specifies a 1.3 mm drilled hole diameter with a +0.1 mm tolerance for its 0.6 × 1.0 mm solder pins.
No. This component is a THT female header with solder termination. Compatible wire-termination connectors within the WAGO MCS MIDI Classic system may use CAGE CLAMP® technology, but the PCB header itself is soldered.
The connector measures 44.8 mm wide, 23.25 mm high and 11.6 mm deep, with a height of 18.25 mm above the mounting surface.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capability. Connections should only be mated or unmated after the circuit has been safely isolated and is no longer live or carrying load current.
WAGO MCS MIDI Classic connectors offer dependable electrical interconnection solutions for industrial electronics, machinery and control systems. The WAGO 232-136/031-000 combines six-pole connectivity, through-hole solder termination, a mounting flange and durable insulating materials to support reliable PCB and panel-mounted connections in modular electrical equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.