Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.63
The WAGO 232-135/005-000/039-000 is a 5-pole female connector for rail-mount terminal blocks from the WAGO 232 Series Multi Connection System (MCS). Featuring a 5 mm contact pitch, straight connector design, extended 0.6 × 1 mm contact pins and an integrated locking lever, this connector is designed for modular electrical connections in industrial control and automation equipment.
Specifically designed for use with compatible WAGO 280 Series rail-mount terminal blocks, the connector's extended pins interface with the terminal block termination ports. Its locking lever provides mechanical retention of the plug-in connection, making this version particularly useful where secure connector engagement is required.
The WAGO 232-135/005-000/039-000 provides five separate electrical potentials and has an IEC rated current of 12 A. Its IEC voltage ratings are 320 V under overvoltage category III conditions and 630 V under category II, pollution degree 2 conditions.
With a grey PA66 insulating housing, tin-plated copper-alloy contacts, coding fingers and a touch-protected female mating interface, the connector is suitable for consideration in appropriately designed industrial electrical assemblies.
Technical selection note: Electrical ratings vary according to the applicable standard, overvoltage category and pollution degree. The 630 V IEC rating applies to category II/2 conditions; category III installations must use the corresponding 320 V IEC rating. Always assess the complete terminal block and mating connector assembly against the applicable electrical requirements.
A distinguishing feature of the WAGO 232-135/005-000/039-000 is its integrated locking lever. This mechanism provides additional mechanical retention for the connector when engaged with its compatible mating component.
In industrial control equipment, connectors may be exposed to movement, routine maintenance activity or mechanical forces transmitted through associated assemblies. A suitable locking arrangement helps maintain connector engagement and reduces the risk of unintended separation.
The locking lever should be operated according to WAGO's instructions, and the complete connector assembly should be correctly aligned before engagement.
The locking lever provides mechanical retention; it does not give the connector load-breaking capability or permit disconnection while energised.
The WAGO 232-135/005-000/039-000 is intended for use with compatible WAGO 280 Series rail-mount terminal blocks.
Its extended 0.6 × 1 mm contact pins connect to the termination ports of the appropriate terminal blocks, creating a modular electrical interface. The female connector can then mate with a compatible plug-in component.
WAGO 280 Series terminal blocks incorporate CAGE CLAMP® spring-pressure conductor connection technology. The female connector itself does not have a conventional conductor-entry spring clamp; it establishes its connection through the extended contact pins.
This arrangement is useful in industrial control panels where terminal block wiring and detachable connector interfaces are incorporated into the same electrical assembly.
The five-pole configuration provides five separate electrical contact positions within a single connector housing.
With a 5 mm contact pitch, the connector supports a compact arrangement of multiple electrical potentials while maintaining the defined spacing required by its connection system.
The connector's straight orientation provides a consistent mating direction, while its integrated coding fingers allow suitable coding arrangements to be configured.
When selecting the WAGO 232-135/005-000/039-000, engineers should confirm that the complete assembly has sufficient installation space for the connector body and locking lever.
WAGO describes the female connectors in this product family as touch-protected when unmated.
This design characteristic helps reduce the possibility of accidental contact with the recessed female contacts during equipment assembly and servicing.
Nevertheless, touch protection is only one element of electrical safety. The equipment must be designed to prevent hazardous access to live parts, and all connection and disconnection procedures must follow the manufacturer's instructions.
Important safety requirement: WAGO MCS connectors are specified without breaking capacity under DIN EN 61984. They must not be connected or disconnected while live or under load.
Correct compatibility is essential when installing the WAGO 232-135/005-000/039-000.
Before selecting the connector, confirm:
The related WAGO 232-135/005-000 is the version without the additional /039-000 locking-lever configuration. Although the two products share their basic pole count and connection system, they should not be treated as direct substitutes without checking the equipment's mechanical retention requirements.
The WAGO 232-135/005-000/039-000 should also not be confused with the WAGO 232-135 THT female header, which is intended for PCB solder mounting rather than connection to rail-mount terminal block termination ports.
Before installing the WAGO 232-135/005-000/039-000, confirm that the selected terminal block and mating connector are suitable for the intended application.
Ensure that the connector is correctly aligned with the compatible terminal block termination ports before engagement. Avoid excessive force on the contact pins, connector housing or locking lever.
The locking mechanism should be fully engaged according to the manufacturer's instructions, and sufficient clearance should be provided for operation and maintenance.
For replacement work, match the complete part number, including /005-000/039-000, to ensure the correct long-pin and locking-lever configuration is supplied.
Electrical safety: The connector must not be connected or disconnected while live or under load. Safely isolate the electrical circuit before assembly, separation or maintenance.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Product Series | WAGO 232 | |
| Height | 21.6 mm | |
| Operating temperature | -60 – 85 °C | |
| Number of poles | 5 | |
| Rated current In | 12 A | |
| Rated voltage | 320 V | |
| Width | 40.8 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Depth | 11.6 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-135/005-000/039-000 | |
| Series | 232 / MCS Multi Connection System | |
| Product type | Female connector for rail-mount terminal blocks | |
| Connector gender | Female / socket | |
| Total electrical potentials | 5 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 5 mm | |
| Connector orientation | Straight | |
| Contact pin dimensions | 0.6 × 1 mm | |
| Connection interface | Compatible rail-mount terminal block termination ports | |
| Compatible terminal block family | WAGO 280 Series, subject to exact product compatibility | |
| Plug-in connection locking | Locking lever | |
| Coding fingers | Yes | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colour | Grey | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | -60°C to +85°C | |
| Height from mounting surface | 21.6 mm | |
| Dimensions (W × H × D) | 40.8 × 36.1 × 11.6 mm | |
| Approximate weight | 6.14 g | |
| GTIN / EAN | 4044918570886 | |
| Country of origin | Germany |
The WAGO 232-135/005-000/039-000 is a 5-pole straight female connector for compatible rail-mount terminal blocks. It features 5 mm contact spacing, extended 0.6 × 1 mm pins and an integrated locking lever.
The connector has five poles, providing five separate electrical potentials.
The connector has a 5 mm contact pitch.
Yes. The /039-000 variant includes an integrated locking lever to provide mechanical retention of the compatible plug-in connection.
The connector is designed for compatible WAGO 280 Series rail-mount terminal blocks. Exact terminal block compatibility must be confirmed using WAGO documentation.
The connector has an IEC rated current of 12 A. Its UL 1059 ratings include 15 A for Use Group B and 10 A for Use Group D.
The connector is rated at 320 V IEC under category III/3 and III/2 conditions and 630 V IEC under category II/2 conditions.
The connector measures approximately 40.8 mm wide, 36.1 mm high and 11.6 mm deep.
The specified temperature limit range is -60°C to +85°C.
Yes. The female connector interface is described as touch-protected when unmated. Appropriate electrical safety procedures must still be followed.
The 232-135/005-000/039-000 includes a locking lever, whereas the standard 232-135/005-000 does not have the same additional locking-lever configuration. Verify mechanical compatibility before substitution.
No. WAGO specifies that its MCS connectors do not have breaking capacity under DIN EN 61984. They must not be connected or disconnected while live or under load.
The WAGO 232-135/005-000/039-000 combines a five-pole connection arrangement, 5 mm pitch, extended contact pins and an integrated locking lever in a female connector designed for compatible rail-mount terminal blocks. Its modular design and defined electrical ratings make it a practical component for appropriately engineered industrial control and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.