Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.52
The WAGO 232-133/005-000 is a 3-pole female connector for rail-mount terminal blocks from the WAGO MCS MIDI Classic 232 Series. Featuring a 5 mm contact pitch, straight connector design, extended 0.6 × 1 mm contact pins and a grey insulating housing, it provides a detachable electrical interface for compatible WAGO rail-mounted terminal block assemblies.
Unlike conventional PCB-mounted headers, the WAGO 232-133/005-000 is specifically designed to connect to the termination ports of compatible WAGO 280 Series rail-mount terminal blocks. Its long contact pins establish the connection to the terminal block, allowing a suitable mating connector to form a pluggable electrical interface.
The connector provides three separate electrical contact positions and has published ratings of 12 A IEC and 630 V IEC under overvoltage category II, pollution degree 2 conditions. It also features coding fingers and a touch-protected female interface when unmated.
Designed for industrial control panels, modular electrical distribution assemblies and automation equipment, the WAGO 232-133/005-000 offers a practical solution where a detachable connection is required at a compatible rail-mounted terminal block.
Technical selection note: The IEC voltage rating of 630 V applies under overvoltage category II, pollution degree 2 conditions. Different installation environments and insulation coordination requirements may result in different permissible ratings. Always verify the latest WAGO datasheet and the electrical ratings of the complete terminal block and mating connector assembly.
The WAGO 232-133/005-000 is specifically designed for connection to compatible rail-mounted terminal blocks, rather than for direct installation into a printed circuit board.
Its extended contact pins connect to the termination ports of suitable WAGO 280 Series rail-mount terminal blocks. These terminal blocks use WAGO CAGE CLAMP® technology for conductor termination, allowing the terminal block and female connector to form part of a modular electrical connection arrangement.
This configuration can be useful where electrical connections need to be routed through terminal blocks while retaining a detachable connector interface for associated equipment.
The three-pole arrangement provides three separate contact positions, enabling multiple electrical circuits or potentials to be accommodated within a single connector assembly.
Important: The WAGO 232-133/005-000 does not itself provide a conventional CAGE CLAMP® conductor termination. Its extended contact pins interface with compatible rail-mount terminal blocks that provide the conductor connection technology.
The WAGO 232-133/005-000 features a touch-protected female connector interface when unmated, an important design characteristic for modular electrical connections.
The female contact arrangement helps reduce the likelihood of accidental contact with conductive parts at the connector interface. This is particularly relevant in equipment where connector assemblies may be separated during maintenance.
However, touch protection must not be interpreted as permission to connect or disconnect the assembly while energised. The complete electrical installation must comply with the applicable safety requirements, and the connector should only be operated according to the manufacturer's instructions.
The straight connector configuration provides a defined mating orientation, while the 5 mm pitch allows three contact positions to be accommodated within a compact housing.
With an overall width of approximately 16.5 mm, the connector is suitable for consideration in space-conscious industrial electrical assemblies.
The connector incorporates coding fingers and a latch arrangement appropriate to the 3-pole design. WAGO specifies that 2- and 3-pole female connectors in this product family use a single latch.
For applications requiring a separate locking lever, WAGO offers the related 232-133/005-000/039-000 variant. This is a different manufacturer part number and should not be treated as automatically interchangeable with the standard 232-133/005-000.
The WAGO 232-133/005-000 must be installed with a compatible rail-mount terminal block and correctly specified mating connector.
When selecting components, confirm:
The WAGO 232-133/005-000 should not be confused with the WAGO 232-133, which is a THT female header intended for PCB mounting. Although both have three poles and a 5 mm pitch, their intended installation methods differ.
Before installing the WAGO 232-133/005-000, confirm that the selected rail-mount terminal block is compatible with the connector's extended contact pins and that the complete assembly is suitable for the intended electrical load.
Conductor termination should be carried out using the installation instructions for the compatible terminal block. The connector itself is not intended to accept conductors directly through spring-pressure terminals.
During assembly, ensure that the connector is correctly aligned with the terminal block termination ports and that its mating interface is not subjected to excessive mechanical stress.
For replacement applications, match the complete manufacturer part number, including the /005-000 suffix, to avoid selecting a connector with a different mounting or locking arrangement.
Electrical safety: Do not assume that the WAGO 232-133/005-000 has load-breaking capability. The electrical circuit should be safely isolated before mating, disconnecting or servicing the connector unless WAGO explicitly specifies otherwise.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Product Series | WAGO 232 | |
| Height | 18.25 mm | |
| Operating temperature | -60 – 85 °C | |
| Number of poles | 3 | |
| Rated current In | 12 A | |
| Rated voltage | 320 V | |
| Width | 16.5 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Depth | 11.6 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-133/005-000 | |
| Series | MCS MIDI Classic / 232 Series | |
| Product type | Female connector for rail-mount terminal blocks | |
| Connector gender | Female / socket | |
| Number of contact positions | 3 | |
| Number of electrical potentials | 3 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Connector orientation | Straight | |
| Contact pin dimensions | 0.6 × 1 mm | |
| Connection interface | Compatible rail-mount terminal block termination ports | |
| Compatible terminal block family | WAGO 280 Series, subject to individual product compatibility | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Housing colour | Grey | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | -60°C to +85°C | |
| Dimensions (W × H × D) | 16.5 × 32.75 × 11.6 mm | |
| Approximate weight | 3.08 g | |
| Touch-protected female contacts | Yes, when unmated | |
| Coding fingers | Yes | |
| Latch arrangement | One latch on the 3-pole configuration | |
| GTIN / EAN | 4044918569545 | |
| Country of origin | Germany |
The WAGO 232-133/005-000 is a 3-pole straight female connector for compatible rail-mount terminal blocks. It features a 5 mm pitch, extended 0.6 × 1 mm contact pins and a grey housing.
The connector has 3 poles, providing three separate electrical contact positions.
The connector has a 5 mm contact pitch.
The connector is designed for compatible WAGO 280 Series rail-mount terminal blocks. Individual terminal block compatibility should be confirmed using WAGO documentation.
The connector has an IEC rated current of 12 A and a published UL current rating of 15 A. The complete connector assembly must also be assessed for the intended application.
The connector has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. Its published UL voltage rating is 600 V.
The connector itself uses extended contact pins to connect to compatible rail-mount terminal blocks. The associated WAGO 280 Series terminal blocks use CAGE CLAMP® technology for conductor termination.
Yes. WAGO describes the female connector interface as touch-protected when unmated. Appropriate electrical isolation and safe working procedures are still required.
The connector measures approximately 16.5 mm wide, 32.75 mm high and 11.6 mm deep.
The WAGO 232-133 is a THT female header for PCB mounting, whereas the 232-133/005-000 is a female connector with extended contact pins designed for compatible rail-mount terminal blocks. They are not direct substitutes.
The standard 232-133/005-000 features the connector family's latch arrangement. The related 232-133/005-000/039-000 is specifically identified as the locking-lever variant.
Do not assume that the connector is rated for connection or disconnection under load. The circuit should be safely isolated before mating or separation unless the manufacturer explicitly specifies an appropriate load-breaking capability.
The WAGO 232-133/005-000 combines a 3-pole contact arrangement, 5 mm pitch and extended contact pins in a female connector designed for compatible WAGO rail-mount terminal blocks. Its modular design, touch-protected female interface and integrated coding features make it a practical component for appropriately engineered industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.