Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.12
The WAGO 232-132/005-000 is a 2-pole straight female connector for rail-mount terminal blocks from the WAGO MCS MIDI Classic 232 Series. Featuring 0.6 × 1 mm contact pins, a 5 mm pin spacing and a grey insulating housing, it provides a pluggable electrical connection interface for compatible WAGO terminal block assemblies.
Designed for use with compatible WAGO 280 Series rail-mount terminal blocks equipped with CAGE CLAMP® connections, the connector features long contact pins that engage with the terminal blocks' conductor connection ports. Its straight construction supports direct connection arrangements, while integrated coding fingers help distinguish mating configurations.
With an IEC rated current of 12 A, rated voltages of 320 V or 630 V depending on the applicable overvoltage category and pollution degree, and a compact two-pole design, the WAGO 232-132/005-000 provides a practical solution for modular electrical distribution, control and automation applications.
The WAGO 232-132/005-000 provides a detachable connection interface for compatible WAGO rail-mount terminal blocks. Its long contact pins are designed to engage with the CAGE CLAMP® conductor connection ports of suitable 280 Series terminal blocks, allowing a pluggable connection to be incorporated into an electrical control or distribution assembly.
This arrangement can support modular control-panel construction, equipment testing and maintenance where the correct terminal block and connector combination is specified. The female connector provides touch protection when unmated, while integrated coding fingers assist with connector identification.
Important safety consideration: The WAGO MCS connector system includes components without a rated breaking capacity under DIN EN 61984. The WAGO 232-132/005-000 must not be connected or disconnected while live or under load. Circuit design must also prevent accessible mating contacts from becoming hazardous when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Colour | Grey | |
| Connection | Spring clamp | |
| Product Series | WAGO 232 | |
| Height | 18.25 mm | |
| Operating temperature | -60 – 85 °C | |
| Number of poles | 2 | |
| Rated current In | 12 A | |
| Rated voltage | 320 V | |
| Width | 11.5 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Grey | |
| Depth | 11.6 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 232 – MCS MIDI Classic | |
| Model | 232-132/005-000 | |
| Manufacturer part number | 232-132/005-000 | |
| Product type | Female connector for rail-mount terminal blocks | |
| Manufacturer product group | Multi Connection System | |
| Connector orientation | Straight | |
| Connector gender | Female | |
| Total electrical potentials | 2 | |
| Number of levels | 1 | |
| Pin dimensions | 0.6 × 1 mm | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 15 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Height from mounting surface | 18.25 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Housing material | Polyamide PA66 | |
| Housing colour | Grey | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Compatible terminal block family | WAGO 280 Series | |
| Connector coding | Integrated coding fingers | |
| Retention arrangement | Single latch | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059 and CSA | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918569538 | |
| Manufacturer standard packaging unit | 100 pieces |
The WAGO 232-132/005-000 is a two-pole straight female connector designed for compatible rail-mount terminal blocks. Its long contact pins connect to the conductor entry ports of suitable WAGO 280 Series terminal blocks.
The connector has an IEC rated current of 12 A. Its rated voltage is 320 V under overvoltage category III and 630 V under category II, pollution degree 2. The rated impulse voltage is 4 kV.
The connector has 0.6 × 1 mm rectangular contact pins with 5 mm spacing. It has two poles and a straight connector arrangement.
No. WAGO specifies that connectors in this MCS system without a rated breaking capacity must not be connected or disconnected while live or under load. The circuit must be safely isolated before mating or unmating.
No. The connector is designed for compatible rail-mount terminal blocks, including appropriate WAGO 280 Series models with CAGE CLAMP® conductor connection ports. Verify the exact terminal block configuration, mechanical fit and electrical ratings before installation.
WAGO MCS MIDI Classic connectors support modular electrical connections in industrial control panels, terminal block assemblies and OEM equipment. The WAGO 232-132/005-000 combines two-pole connectivity, long contact pins, a straight connection arrangement and integrated coding features to provide a practical pluggable interface for compatible rail-mount terminal blocks.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.