Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.96
The WAGO 232-121/026-000 is a 21-pole angled female pluggable connector from the WAGO MCS MIDI Classic 232 Series. Designed for detachable electrical connections in industrial automation, control panels and electronic equipment, it combines a high-density connection arrangement with WAGO's established CAGE CLAMP® spring connection technology.
Featuring a 5 mm pin spacing, 14 A IEC rated current and copper conductor capacity from 0.08–2.5 mm², this connector provides 21 independent connection positions for power, signal and control wiring. Its angled design incorporates a 270° conductor entry orientation, allowing cables to be routed conveniently relative to the mating interface.
The grey PA66 housing, integrated test ports, coding fingers and screwless spring-clamp terminals make the WAGO 232-121/026-000 a practical choice for modular electrical assemblies. Its free-hanging cable-side design supports efficient pre-wiring, installation and equipment maintenance when used with a compatible WAGO male connector.
Electrical ratings apply under their respective approval and insulation coordination conditions. The current rating of a complete connector assembly must not exceed the rating of its lowest-rated component.
The WAGO CAGE CLAMP® connection system uses spring pressure to establish secure electrical contact with correctly prepared copper conductors. Unlike conventional screw terminals, the spring connection does not require terminal screw tightening, helping streamline installation and reduce maintenance associated with screw loosening.
The WAGO 232-121/026-000 combines this termination technology with a 21-pole angled female connector arrangement. Its 270° conductor entry orientation provides flexible cable routing, while integrated test ports support electrical inspection and fault-finding. Coding fingers help configure compatible mating arrangements in modular equipment.
The connector's tin-plated copper alloy contacts, PA66 insulating housing and detachable interface support reliable electrical interconnections in industrial applications. Correct conductor preparation, compatible mating connector selection and adherence to the specified electrical and environmental ratings are essential. The connector must not be mated or unmated under load unless the complete assembly is expressly approved for that purpose.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 21 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-121/026-000 | |
| Product family | MCS MIDI Classic | |
| Series | 232 | |
| Product category | Pluggable terminal block connector | |
| Connector type | Angled female connector | |
| Connection technology | CAGE CLAMP® | |
| Conductors per pole | 1 | |
| Total connection points | 21 | |
| Total electrical potentials | 21 | |
| Number of connection levels | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry orientation | 270° relative to mating direction | |
| Actuation | Operating tool | |
| Mounting arrangement | Free-hanging / in-line | |
| Testing provision | Integrated test ports | |
| Coding provision | Integrated coding fingers | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Compatible male system counterpart | WAGO 231-621 | |
| Manufacturer product reference | WAGO 232-121/026-000 |
The WAGO 232-121/026-000 is a 21-pole angled female pluggable connector used for detachable electrical connections in industrial automation, control panels, electronic equipment and PCB-to-cable wiring systems.
The connector has 21 poles, providing 21 separate electrical potentials with one conductor connection point per pole.
It uses WAGO CAGE CLAMP® spring connection technology, which provides screwless conductor termination using spring pressure.
The connector has a nominal 5 mm pin spacing and is designed for use with compatible WAGO MCS MIDI Classic male connectors.
The connector has an IEC rated current of 14 A and a UL rated current of 15 A, subject to the relevant approval conditions and the rating of the complete connector assembly.
The WAGO 232-121/026-000 accommodates copper conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. Permitted conductor sizes depend on conductor construction and preparation.
The specified conductor stripping length is 8–9 mm for correct termination in the CAGE CLAMP® connection.
The 270° conductor entry orientation describes the direction in which conductors enter the connector relative to the mating interface, allowing cables to be routed at an angle rather than directly along the mating direction.
The WAGO 231-621 is a manufacturer-listed compatible male system counterpart. The complete assembly should be checked for mechanical compatibility and applicable electrical ratings.
The connector is not intended for load-breaking operation unless the complete assembly is specifically approved for that purpose. Isolate the electrical supply before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide practical electrical interconnection solutions for industrial automation, machine building and electronic control equipment, combining established CAGE CLAMP® spring termination with modular pluggable interfaces, integrated testing features and flexible cable-routing arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.