Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.51
The WAGO 232-120/026-000 is a 20-pole, 1-conductor angled female pluggable connector designed for reliable electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 232 Series, it features CAGE CLAMP® spring connection technology for secure, screwless conductor termination.
With a 5 mm pin spacing, an IEC rated current of 14 A and support for copper conductors from 0.08–2.5 mm², the WAGO 232-120/026-000 provides a compact connection interface for multi-circuit power, signal and control wiring. Its twenty-pole arrangement provides 20 independent electrical potentials, each with its own conductor connection.
The connector features a 270° conductor entry orientation, allowing cables to be routed at an angle to the mating direction. Its grey PA66 insulating housing, integrated test ports and coding fingers support practical installation, inspection and connector identification. The detachable female interface also simplifies equipment assembly, maintenance and replacement.
The WAGO CAGE CLAMP® connection system uses spring pressure to establish dependable electrical contact with correctly prepared copper conductors. This screwless termination method eliminates conventional terminal tightening torque requirements and accommodates different conductor constructions within the specified connection range.
The WAGO 232-120/026-000 combines spring-clamp technology with a 270° angled female connector configuration. Its design allows convenient cable routing relative to the mating interface, while the twenty-pole arrangement supports dense multi-circuit connections in industrial electronic equipment. Integrated test ports facilitate inspection, and coding fingers support the identification of mating arrangements.
The connector's tin-plated copper alloy contacts, flame-retardant PA66 housing and detachable interface support modular industrial equipment design. Correct conductor preparation, mating connector selection and adherence to the applicable current, voltage and environmental ratings are essential. The connector is not intended to be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 20 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-120/026-000 | |
| Series | MCS MIDI Classic / 232 Series | |
| Product type | 1-conductor angled female pluggable connector | |
| Connector gender | Female / socket | |
| Connection technology | CAGE CLAMP® | |
| Conductors per pole | 1 | |
| Total conductor connection points | 20 | |
| Total electrical potentials | 20 | |
| Number of levels | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC) | 630 V under applicable insulation coordination conditions | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Conductor cross-section range | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction | 270° relative to mating direction | |
| Actuation type | Operating tool | |
| Testing provision | Integrated test ports | |
| Coding provision | Integrated coding fingers | |
| Mounting arrangement | Free-hanging / cable-side connector | |
| Width | 102.4 mm | |
| Height | 23.9 mm | |
| Depth | 22.75 mm | |
| Weight | Approximately 37.236 g | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Product group | Multi Connection System (MCS) | |
| Connector standard | IEC/EN 61984 | |
| Compatible system counterpart | WAGO 231-620 male connector |
The WAGO 232-120/026-000 is a 20-pole angled female pluggable connector used for detachable electrical connections in industrial automation, control panels, electronic equipment and PCB-to-cable wiring systems.
The connector has 20 poles, providing twenty separate electrical potentials with one conductor connection point per pole.
It uses CAGE CLAMP® spring connection technology, providing screwless conductor termination through spring-pressure contact.
The connector has a nominal 5 mm pin spacing and is designed for use with compatible WAGO MCS MIDI Classic mating connectors.
The connector has an IEC rated current of 14 A and a UL rated current of 15 A, subject to the applicable approval conditions and the ratings of the complete connector assembly.
The WAGO 232-120/026-000 supports copper conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. The permitted conductor size depends on conductor construction and preparation.
The recommended conductor stripping length is 8–9 mm to ensure correct insertion into the CAGE CLAMP® connection.
The 270° conductor entry orientation describes the direction in which conductors enter the connector relative to the mating direction, allowing cables to be routed at an angle rather than directly in line with the mating interface.
The WAGO 231-620 is a manufacturer-listed male system counterpart for the WAGO 232-120/026-000. The complete assembly should be checked for the required mechanical configuration and electrical ratings.
No. The WAGO MCS connector system is not intended for load-breaking operation. Isolate the electrical supply before connecting or disconnecting the assembly, and ensure that exposed mating contacts cannot present a hazardous voltage.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical interconnection solutions for industrial automation, machine building and control equipment, combining established CAGE CLAMP® spring connection technology with compact angled designs, integrated testing features and convenient detachable wiring interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.