Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.05
The WAGO 232-119/026-000 is a 19-pole, angled female pluggable connector from the WAGO MCS MIDI Classic 232 Series. Designed for industrial electrical and electronic equipment, it combines CAGE CLAMP® spring pressure connection technology, a 5 mm pin spacing and a grey insulating housing to provide a practical modular wiring interface.
Featuring 270° conductor entry relative to the mating direction, this connector supports convenient cable routing in control cabinets, electronic enclosures and equipment assemblies. Its CAGE CLAMP® connection system accommodates solid and fine-stranded conductors without conventional screw terminals, while operating-tool actuation enables controlled conductor insertion and removal.
With an IEC rated current of 14 A, rated voltages of 320–630 V depending on installation conditions, and conductor capacity of 0.08–2.5 mm², the WAGO 232-119/026-000 provides nineteen separate electrical connection positions. Integrated test ports and coding fingers further support convenient installation, testing and maintenance.
The WAGO 232-119/026-000 provides a modular connection interface between external conductors and compatible mating components in industrial electrical equipment. Its 19-pole configuration accommodates multiple separate power, control or signal connections, subject to the electrical ratings of the complete connector system. The angled conductor entry arrangement helps engineers manage wiring routes in compact control cabinets and electronic enclosures.
The CAGE CLAMP® spring pressure connection system secures conductors without conventional screw tightening. Integrated test ports support electrical testing and troubleshooting, while coding fingers allow application-specific connector identification. Before installation, verify mating compatibility and the applicable voltage and current ratings. Electrical equipment should be safely isolated before mating or unmating unless the complete connector assembly is specifically approved for the intended live-disconnection duty.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 19 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 232 – MCS MIDI Classic | |
| Model | 232-119/026-000 | |
| Manufacturer part number | 232-119/026-000 | |
| Product type | 1-conductor angled female pluggable connector | |
| Product group | MCS MIDI Classic pluggable connectors | |
| Total connection points | 19 | |
| Total electrical potentials | 19 | |
| Number of connection levels | 1 | |
| Pin spacing | 5 mm | |
| Conductor entry direction relative to mating direction | 270° | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure connection | |
| Actuation type | Operating tool | |
| Actuation direction | Parallel or perpendicular to conductor entry | |
| Conductor strip length | 8–9 mm | |
| Connector gender | Female | |
| Connector construction | Angled | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Width | 97.4 mm | |
| Height | 23.9 mm | |
| Depth | 22.75 mm | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918384254 | |
| Manufacturer standard packaging unit | 10 pieces |
The WAGO 232-119/026-000 is a 19-pole angled female pluggable connector used to connect electrical conductors to compatible mating components in industrial automation, electronic control equipment and modular electrical assemblies.
The connector accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², and the conductor strip length is 8–9 mm.
The connector has an IEC rated current of 14 A and IEC rated voltages of 320 V under overvoltage category III or 630 V under category II, pollution degree 2. Its rated impulse voltage is 4 kV. Under UL 1977, the ratings are 600 V and 15 A.
The 270° conductor entry orientation allows wiring to approach the connector at an angle relative to the mating direction. This supports practical cable routing in electrical enclosures and equipment assemblies where straight conductor entry may be inconvenient.
No. The WAGO 232-119/026-000 uses CAGE CLAMP® spring pressure technology with operating-tool actuation. Its connection mechanism is distinct from Push-in CAGE CLAMP® connectors designed for direct insertion of suitable conductors without first opening the clamp.
WAGO MCS MIDI Classic connectors support modular electrical connections in industrial automation, electronic control equipment and OEM assemblies. The WAGO 232-119/026-000 combines nineteen-pole connectivity, angled conductor entry, CAGE CLAMP® termination and integrated test ports to provide a practical connection solution for industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.