Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.06
The WAGO 232-117/026-000 is a 17-pole, 1-conductor angled female pluggable connector from the WAGO MCS MIDI Classic 232 Series. Featuring WAGO's proven CAGE CLAMP® spring-pressure connection technology, a 5 mm contact pitch and a grey insulating housing, this connector provides a practical solution for multi-circuit electrical connections in industrial automation, electronic control systems and PCB-based equipment.
Designed with a 270° conductor entry orientation relative to the mating direction, the WAGO 232-117/026-000 allows conductors to be routed at an angle to the plug-in interface. This makes it particularly useful in control cabinets, machinery and electronic enclosures where cable routing and installation space are important considerations.
The connector provides 17 separate electrical potentials and 17 conductor connection points, with one conductor connection per pole. It accepts solid and fine-stranded conductors from 0.08 to 2.5 mm² and has an IEC rated current of 14 A.
With an IEC rated voltage of up to 630 V under overvoltage category II, pollution degree 2 conditions, integrated test ports and coding features, the WAGO 232-117/026-000 is well suited to appropriately designed industrial electrical assemblies requiring a compact, detachable 17-way connection.
Technical selection note: The voltage and current ratings depend on the applicable standard and installation conditions. The 630 V IEC rating applies to overvoltage category II, pollution degree 2; applications requiring category III ratings must use the corresponding 320 V specification. Always verify the complete connector assembly and mating component against the current WAGO datasheet.
The WAGO 232-117/026-000 features WAGO's established CAGE CLAMP® technology, providing conductor termination without conventional screw tightening.
An operating tool opens the spring clamp so the prepared conductor can be inserted. Once the clamp is released, the spring applies contact pressure to the conductor, establishing the electrical connection.
This technology supports suitable solid and fine-stranded conductors across the specified 0.08–2.5 mm² range. Fine-stranded conductors fitted with ferrules are also supported, subject to the appropriate ferrule type and permitted conductor size.
The connector provides operating-tool access both parallel and perpendicular to the conductor entry direction. This flexibility can simplify cable pre-assembly and wiring within electrical equipment where access is restricted.
The specified 8–9 mm stripping length should be followed to ensure correct conductor positioning and termination.
The 270° conductor entry orientation is a key feature of the WAGO 232-117/026-000. It allows conductors to enter the connector at an angle relative to the mating direction, providing an alternative to straight-entry connector arrangements.
This design can be particularly useful in industrial control panels, PCB-based electronic assemblies and compact enclosures where wiring needs to be routed around neighbouring components.
With 17 poles on a 5 mm pitch, the connector consolidates multiple electrical connections into a single detachable assembly. Each pole provides one conductor termination and one separate electrical potential.
Integrated test ports support testing and commissioning, while coding fingers allow suitable coding arrangements to be configured. The connector itself is specified without plug-in locking or inherent mismating protection, so any additional retention or coding requirements should be assessed at system level.
The WAGO 232-117/026-000 must be paired with a compatible 17-pole male connector or header from the appropriate WAGO connection system.
When selecting the mating component, confirm the 5 mm pitch, contact geometry, pole count, connector orientation and electrical ratings. Similar-looking WAGO connectors with different pitch dimensions or mating configurations should not be assumed to be interchangeable.
Because the connector has no specified load-breaking capability, it must not be connected or disconnected while live or under load. The equipment design should also ensure that accessible header pins are not energised when the connector is unmated.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 17 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-117/026-000 | |
| Series | MCS MIDI Classic / 232 Series | |
| Product type | 1-conductor angled female pluggable connector | |
| Conductors per pole | 1 | |
| Total conductor connection points | 17 | |
| Total electrical potentials | 17 | |
| Number of levels | 1 | |
| Contact gender | Female / socket | |
| Connector design | Angled | |
| Conductor entry direction | 270° relative to mating direction | |
| Contact pitch | 5 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Spring-pressure connection | |
| Actuation type | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage (IEC) | 4 kV | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Mounting arrangement | Free-hanging / conductor-mounted | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Plug-in connection locking | Without locking | |
| Mismating protection | No | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Width | 87.4 mm | |
| Height | 23.9 mm | |
| Depth | 22.75 mm | |
| Dimensions (W × H × D) | 87.4 × 23.9 × 22.75 mm | |
| Approximate weight | 31.7 g | |
| GTIN / EAN | 4044918384216 |
The WAGO 232-117/026-000 is a 17-pole, 1-conductor angled female pluggable connector from the WAGO MCS MIDI Classic 232 Series. It features CAGE CLAMP® termination, a 5 mm pitch and a grey housing.
The connector has 17 poles, providing 17 separate electrical potentials and 17 conductor connection points.
The connector has a 5 mm contact pitch and must be paired with a compatible mating header.
The connector has an IEC rated current of 14 A. Under UL 1977, it is rated at 15 A. Ratings under other standards and use groups may differ.
The connector is rated at 630 V IEC under overvoltage category II, pollution degree 2, and 320 V IEC under category III/2 and III/3. Its UL 1977 rating is 600 V.
The WAGO 232-117/026-000 accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², equivalent to 28–12 AWG. Different limits apply to fine-stranded conductors fitted with insulated or uninsulated ferrules.
CAGE CLAMP® is WAGO's spring-pressure conductor termination system. An operating tool opens the spring clamp, allowing the prepared conductor to be inserted before the spring establishes electrical contact.
The 270° conductor entry describes the orientation of the conductor entry relative to the connector's mating direction. It provides an angled cable-routing arrangement.
Yes. The connector features integrated test ports to support appropriate electrical testing and commissioning.
The specified conductor stripping length is 8–9 mm.
The connector measures 87.4 mm wide, 23.9 mm high and 22.75 mm deep.
No. WAGO's MCS connectors are specified without breaking capacity and must not be connected or disconnected while live or under load. The circuit should be safely isolated before mating or separation.
The WAGO 232-117/026-000 combines a 17-pole connection arrangement, 5 mm pitch, CAGE CLAMP® technology and 270° angled conductor entry in a compact female pluggable connector. Its screwless termination, integrated test ports and modular interface make it a practical component for appropriately designed industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.