Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.61
The WAGO 232-114/026-000 is a 14-pole, 1-conductor angled female pluggable connector designed for dependable electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 232 Series, it features proven CAGE CLAMP® spring connection technology for secure, screwless conductor termination.
Featuring a 5 mm pin spacing, an IEC rated current of 14 A and support for copper conductors from 0.08–2.5 mm², the WAGO 232-114/026-000 provides a compact connection interface for industrial power, signal and control wiring. Its fourteen-pole arrangement provides fourteen independent electrical potentials, with one conductor connection per pole.
The connector's 270° conductor entry orientation supports convenient cable routing in compact equipment. Its grey insulating housing, integrated test ports and coding fingers assist installation, electrical testing and connector identification. The detachable female interface also simplifies equipment assembly, maintenance and replacement.
The WAGO CAGE CLAMP® connection system uses spring pressure to establish secure electrical contact with correctly prepared copper conductors. This technology eliminates conventional terminal screw tightening requirements and accommodates different conductor constructions within the specified connection range. Operating-tool actuation enables controlled conductor insertion and removal.
The WAGO 232-114/026-000 combines this spring-clamp technology with an angled female connector arrangement. Its 270° conductor entry direction allows cables to be routed conveniently relative to the mating interface, while vertical and horizontal CAGE CLAMP® actuation supports efficient cable pre-assembly and on-equipment wiring.
Integrated test ports simplify electrical inspection, while coding fingers provide an additional means of distinguishing connector mating arrangements. The tin-plated copper alloy contacts and detachable connection interface make the connector suitable for modular industrial equipment. Correct mating connector selection, conductor preparation and adherence to applicable electrical ratings remain essential for reliable operation.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 14 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-114/026-000 | |
| Series | MCS MIDI Classic / 232 Series | |
| Product type | 1-conductor angled female pluggable connector | |
| Connector gender | Female / socket | |
| Connection technology | CAGE CLAMP® | |
| Conductors per pole | 1 | |
| Total conductor connection points | 14 | |
| Total electrical potentials | 14 | |
| Number of contact rows | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 14 A | |
| Conductor cross-section range | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Compatible conductor material | Copper | |
| Conductor entry orientation | 270° relative to mating direction | |
| Actuation type | Operating tool | |
| Testing provision | Integrated test ports | |
| Coding provision | Integrated coding fingers | |
| Mounting arrangement | Free-hanging / cable-side connector | |
| Nominal connector length | 72.4 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +85 °C | |
| Manufacturer packaging unit | 25 pieces | |
| Product group | Multi Connection System (MCS) | |
| Manufacturer product reference | WAGO 232-114/026-000 |
The WAGO 232-114/026-000 is a 14-pole angled female pluggable connector used for detachable electrical connections in industrial automation, control panels, electronic equipment and PCB-to-cable wiring systems.
The connector has 14 poles, providing fourteen separate electrical potentials with one conductor connection point per pole.
It uses CAGE CLAMP® spring connection technology, providing screwless conductor termination through spring-pressure contact.
The connector has a nominal 5 mm pin spacing and is designed for use with appropriately matched WAGO MCS MIDI Classic mating connectors.
The connector has an IEC rated current of 14 A, subject to the applicable installation conditions and ratings of the complete connector assembly.
The WAGO 232-114/026-000 supports copper conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. Permitted conductor sizes depend on conductor construction and preparation.
The 270° conductor entry orientation describes the direction in which conductors enter the connector relative to its mating direction, allowing cables to be routed at an angle rather than directly in line with the mating interface.
Yes. The connector features integrated test ports that support electrical testing and troubleshooting without requiring conductor removal.
The WAGO 232-114/026-000 has a manufacturer packaging unit of 25 pieces. Distributor order quantities may vary.
The WAGO MCS connector system is not generally designed for load-breaking operation. Isolate the electrical supply before connecting or disconnecting the assembly unless the complete system is expressly approved for another procedure.
WAGO MCS MIDI Classic pluggable connectors provide practical and dependable interconnection solutions for industrial automation, machine building and control equipment, combining established CAGE CLAMP® spring connection technology with compact angled designs, integrated testing features and convenient detachable wiring interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.